BCS 1U Series Manuale utente
1
1U and Simple Entry Level Series DVR
Quick Start Guide
2
Table of Contents
1Hardware Installation and Connection..........................................................................5
1.1 Check Unpacked DVR ..........................................................................................5
1.2 About Front Panel and Real Panel .....................................................................5
1.3 After Remove the Chassis....................................................................................5
1.4 HDD Installation .....................................................................................................5
1.4.1 Standard 1U Series.....................................................................................5
1.4.2 Simple Entry Level Series..........................................................................6
1.5 Front Panel .............................................................................................................7
1.5.1 Standard 1U Series.....................................................................................7
1.5.2 Simple Entry Level Series..........................................................................7
1.6 Rear Panel ..............................................................................................................9
1.6.1 Standard 1U Series.....................................................................................9
1.6.2 Simple Entry Level Series........................................................................10
1.7 Connection Sample .............................................................................................10
1.8 Alarm Input and Output Connection .................................................................12
1.8.1 Alarm Input and Output Details...............................................................12
1.8.2 Alarm Input Port.........................................................................................13
1.8.3 Alarm Output Port......................................................................................14
2Overview of Navigation and Controls..........................................................................15
2.1 Login, Logout & Main Menu ...............................................................................15
2.1.1 Login............................................................................................................15
2.1.2 Main Menu..................................................................................................15
2.1.3 Logout .........................................................................................................16
2.1.4 Auto Resume after Power Failure ..........................................................16
2.2 Recording Operation ...........................................................................................16
2.2.1 Live Viewing ...............................................................................................16
2.3 Record Setup (Schedule) ...................................................................................16
2.3.1 Schedule Menu..........................................................................................16
2.3.2 Manual Record ..........................................................................................17
2.3.3 Encode........................................................................................................18
2.3.4 Snapshot.....................................................................................................19
3
2.3.5 Image FTP..................................................................................................19
2.3.6 Search and Playback................................................................................20
2.3.7 Basic Operation .........................................................................................21
2.4 Network Setup......................................................................................................22
2.5 Pan/Tilt/Zoom .......................................................................................................23
2.5.1 PTZ Setup ..................................................................................................23
2.5.2 PTZ Operation ...........................................................................................24
2.5.3 3D Intelligent Positioning Key .................................................................24
3Web Client Operation ....................................................................................................26
3.1 Network Connection ............................................................................................26
3.2 Login ......................................................................................................................26
3.3 Main Window ........................................................................................................26
4
Welcome
Thank you for purchasing our DVR!
This quick start guide will help you become familiar with our DVR in a very short time.
Here you can find hardware installation，cable connection information and general operations
such as system setup, record, search, backup, alarm setup, PTZ operation, also here you can
find web operation instruction.
Before installation and operation, please read the following safeguard and warning carefully!
Important Safeguard and Warning
1．Electrical safety
All installation and operation here should conform to your local electrical safety codes.
We assume no liability or responsibility for all the fires or electrical shock caused by improper
handling or installation.
2．Transportation security
Heavy stress, violent vibration or water splash are not allowed during transportation, storage and
installation.
3．Installation
Keep upwards. Handle with care.
Do not apply power to the DVR before completing installation.
Do not place objects on the DVR
4．Qualified engineers needed
All the examination and repair work should be done by the qualified service engineers.
We are not liable for any problems caused by unauthorized modifications or attempted repair.
5．Environment
The DVR should be installed in a cool, dry place away from direct sunlight, inflammable,
explosive substances and etc.
6. Accessories
Be sure to use all the accessories recommended by manufacturer.
Before installation, please open the package and check all the components are included:
Contact your local retailer ASAP if something is missing in your package.
5
1Hardware Installation and Connection
Note: All the installation and operations here should conform to your local
electric safety rules.
1.1 Check Unpacked DVR
When you receive the DVR from the forwarding agent, please check whether there is any visible
damage. The protective materials used for the package of the DVR can protect most accidental
clashes during transportation. Then you can open the box to check the accessories.
Please check the items in accordance with the list on the warranty card (Remote control is
optional). Finally you can remove the protective film of the DVR.
Note
Remote control is not a standard accessory and it is not included in the accessory bag.
1.2 About Front Panel and Real Panel
For detail information of the function keys in the front panel and the ports in the rear panel,
please refer to the User’s Manual included in the resource CD.
The model in the front panel is very important; please check according to your purchase order.
The label in the rear panel is very important too. Usually we need you to represent the serial
number when we provide the service after sales.
1.3 After Remove the Chassis
Please check the data cable, power cable, COM cable and main boar cable connection is firm or
not.
1.4 HDD Installation
1.4.1 Standard 1U Series
This series DVR has only one SATA HDD. Please use HDD of 7200rpm or higher.
You can refer to the User’s Manual for recommended HDD brand.
Please follow the instructions below to install hard disk.
3. Turn four screws for three rounds
to fix HDD bracket.
2. Remove upper cover.
1. Loosen the screws of the
u
pp
er cover.
6
6. Fix the HDD firmly.
5. Turn the device upside down
and then turn the screw in firmly.
4. Place the HDD in
accordance with the four holes.
ith h i
8. Place the upper cover back
and screw firmly.
7. Connect the HDD cable and
power cable.
After completing HDD installation, please check connection of data ribbon and power cord.
1.4.2 Simple Entry Level Series
This series DVR has only one SATA HDD. Please use HDD of 7200rpm or higher.
You can refer to the User’s Manual for recommended HDD brand.
Please follow the instructions below to install hard disk.
3. Lift the front cover up and then
remove.
2. Loosen the screws of side
panel.
1. Loosen the screws of rear
panel.
6. Turn the device upside down
and then push the four screws to
the small holes. Fix the screws
firmly.
5. Place the HDD in accordance
with the big four holes in the
chassis.
4. Fix four screws in the HDD
(Just turn 3 rounds).
7
Note:
zYou can connect the HDD data cable and the power cable first and then fix the HDD in the
device.
zPlease pay attention to the front cover. It adopts the vertical sliding design. You need to
push the clip first and then put down.
1.5 Front Panel
1.5.1 Standard 1U Series
The standard 1U series front panel is shown as in Figure 1-1.
Figure 1-1
1.5.2 Simple Entry Level Series
The simple entry level series front panel is shown as below. See Figure 1-2.
Figure 1-2
Please refer to the following sheet for front panel button information.
Name Icon Function
Power button
Power button, press this button for three seconds to boot up
or shut down DVR.
Shift Shift
In textbox, click this button to switch between numeral,
English(Small/Capitalized),donation and etc.
8. Please fix the clip first and
then put the upper cover back.
9. Fix the screws in the front over
and the side cover.
7. Connect the HDD data cable
and power cable.
8
Activate current control, modify setup, and then move up
and down.
Increase/decrease numeral.
Assistant function such as PTZ menu.
Up/1
Down/4 S、T
In text mode, input number 1/4 (English character G/H/I)
Shift current activated control,
Left/2
Right/3 WXWhen playback, click these buttons to control playback bar.
In text mode, input number 2(English character A/B/C)
/3(English character D/E/F)
Go to previous menu, or cancel current operation.
ESC ESC
When playback, click it to restore real-time monitor mode.
Confirm current operation
Go to default button
Enter ENTER
Go to menu
Record REC Manually stop/start recording, working with direction keys
or numeral keys to select the recording channel.
Slow play/8 Multiple slow play speeds or normal playback.
In text mode, input number 8 (English character T/U/V).
One-window monitor mode, click this button to display
assistant function: PTZ control and image color.
Backspace function: in numeral control or text control, press
it for 1.5seconds to delete the previous character before the
cursor.
In motion detection setup, working with Fn and direction
keys to realize setup.
In text mode, click it to switch between numeral, English
character(small/capitalized) and etc.
Assistant Fn
Realize other special functions.
Fast play/7 Various fast speeds and normal playback.
In text mode, input number 7 (English character P/Q/R/S).
Play
previous/0
_
In playback mode, playback the previous video
In text mode, input number 0.
Reverse/Pau
se/6 W
In normal playback or pause mode, click this button to
reverse
playback
In reverse playback, click this button to pause playback.
In text mode, input number 6 (English character M/N/O)
Play Next/9
fIn playback mode, playback the next video
In menu setup, go to down ward of the dropdown list.
In text mode, input number 9 (English character W/X/Y/Z)
9
Play/Pause /5 f
In normal playback click this button to pause playback
In pause mode, click this button to resume playback.
In text mode, input number 5(English character J/K/L).
USB port To connect USB storage device, USB mouse.
Network
abnormal
indication
light
Net Network error occurs or there is no network connection, the
light becomes red to alert you.
HDD
abnormal
indication
light
HDD HDD error occurs or HDD capacity is below specified
threshold value, the light becomes red to alert you.
Record light 1-16 System is recording or not. It becomes on when system is
recording.
IR Receiver IR It is to receive the signal from the remote control.
Alarm
indication
li
g
ht
Alarm
There is external alarm or not. The light becomes on if there
is an external alarm. The light becomes off once the alarm
sto
p
s.
1.6 Rear Panel
1.6.1 Standard 1U Series
The 4-ch rear panel is shown as below. See Figure 1-3.
Figure 1-3
The 8-ch rear panel is shown as below. See Figure 1-4.
Figure 1-4
The 16-ch real panel is shown as below. See Figure 1-5.
10
Figure 1-5
Please refer to the following sheet for detail information.
1 Video input
2 Audio input
3 Video CVBS output
4 Audio output
5 Network port
6 USB port
7 HDMI port
8 RS232 port
9 Video VGA output
10 Alarm input/alarm output/RS485 port
11 Power input port
12 Power button
1.6.2 Simple Entry Level Series
The simple entry level series rear panel is shown as below. See Figure 1-6.
Figure 1-6
Please refer to the following sheet for detail information.
1 Video input
2 Audio input
3 Audio output
4 Video CVBS output
5 USB port
6 Network port
7 Video VGA output
8 Alarm input/alarm output/RS485 port
9 Power input port
10 Power button
When connect the Ethernet port, please use straight cable to connect the PC and use the
crossover cable to connect to the switcher or router.
1.7 Connection Sample
Questo manuale è adatto per i seguenti modelli
1
Indice
Altri manuali BCS Registratore digitale
