
10 BE-LSxxTL USER MANUAL
MAINTENANCE SAFETY
• Stop the engine, disconnect the spark plug and ground it against the engine before cleaning or inspecting
the machine.
• NEVER perform any service or repair on your log splitter without first removing the spark plug wire.
• Stop the engine and relive hydraulic system pressure by cycling the valve control lever from forward to
reverse several times while engine is not running; returning to neutral before repairing or adjusting fittings,
hoses, tubing or other system components.
• ALWAYS perform all recommended maintenance procedures before using your log splitter.
• ALWAYS check the level of hydraulic oil and engine oil before operation.
• ALWAYS periodically check that all nuts, bolts, screws, hydraulic fittings and hose clamp are tight to be
sure equipment is in safe working condition.
• ALWAYS replace all damaged or worn parts immediately with original equipment manufacturer’s (O.E.M.)
parts only. Use of parts which do not meet the original equipment specifications may lead to improper
performance and compromise safety.
• The hydraulic system of your log splitter requires careful inspection along with the mechanical parts. Be
sure to replace frayed, kinked, cracked or otherwise damaged hydraulic hoses or hydraulic components.
• NEVER check for leaks of hydraulic fluid with your hand. Fluid escaping from a small hole can be almost
invisible. Escaping fluid under pressure can have sucient force to penetrate skin causing SERIOUS
INJURY or even DEATH. Leaks can be safely detected by passing a piece of cardboard over the suspected
leak and looking for discoloration.
• NEVER remove the cap from hydraulic tank or reservoir while the log splitter is running. The tank could
contain hot oil under pressure which could result in serious injury.
• NEVER adjust the hydraulic valve. The pressure relief valve on your log splitter is pre-set at the factory.
Only a qualified service technician should perform this adjustment.
• ALWAYS seek professional medical attention immediately if injured by escaping hydraulic fluid. Serious
infection or reaction can develop if proper medical treatment is not administered immediately.
• ALWAYS be sure to relieve all pressure by shutting o the engine and moving the valve control handle back
and forth should it become necessary to loosen or remove any hydraulic fitting.
NEVER
Alter your log splitter in any manner. Such alterations may cause your log splitter to be unsafe and will
void the warranty.
According to the Consumer Products Safety Commission (CPSC) and the U.S. Environmental Protection
Agency (EPA), This product has an Average Useful Life of seven (7) years, or 130 hours of operation. At
the end of the Average Useful Life have the machine inspected annually by an authorized service dealer
to ensure that all mechanical and safety systems are working properly and not worn excessively.
Failure to do so can result in accidents, injuries or death.