Be-Tech 3001D Series Manuale utente
0
3001DSmartSafeManual
For 3001D-1HL/3001D-3HL/3001D-5HL
SMART SAFE 3001D-1HL/3HL/5HL
SMART SAFE 3001D 1HL/3HL/5HL
1-11
SUMMARY
Thank you for using our company’s smart safe. Before you use this product, please read this manual carefully,
it will help you to use the smart safe in a correct way. Compare with the general safe, this smart safe will be
more securely and conveniently. Welcome to visit our web site, please contact us if you have any demands
and comments in our product.
SMART SAFE 3001D-1HL
SMART SAFE 3001D-3HL
SMART SAFE 3001D-5HL
SMART SAFE 3001D-1HL/3HL/5HL
SMART SAFE 3001D 1HL/3HL/5HL
2-11
ELECTRONIC PARAMETERS
Power supply: 4*AA alkaline batteries
Alarm voltage: DC 4.2V±0.2V
Static current: ≤30uA
Dynamic current: ≤400mA
Working temperature: 0℃~55℃
Working humidity: 20% ~ 93% ±2RH
SMART SAFE 3001D-1HL/3HL/5HL
SMART SAFE 3001D 1HL/3HL/5HL
3-11
NOTICES
Position the smart safe in a level and a covert area.
Place the smart safe in cool and dry place.
Avoid direct sunlight.
Do not dismantle the smart safe privately.
Do not tread on the smart safe.
Do not mix the different types of batteries or mix new batteries and the old batteries together.
Make sure that the positive and negative electrodes are connected correctly.
The man-made destruction is not on the warranty in the contract scope.
SMART SAFE 3001D-1HL/3HL/5HL
SMART SAFE 3001D 1HL/3HL/5HL
4-11
MATERIAL CONTAINED INSIDE THE PACKAGING
SMART SAFE 3001D-1HL/3HL/5HL
SMART SAFE 3001D 1HL/3HL/5HL
5-11
INSATLLATION
When you received the smart safe, you need to carry out some simple operations.
INSTALLING BATTERIES
Remove the protective lid unscrewing the screws, and fit the batteries into their seats.
SMART SAFE 3001D-1HL/3HL/5HL
SMART SAFE 3001D 1HL/3HL/5HL
6-11
POSITION
Now you can position the smart safe on the top of a piece of furniture, or inside a cabinet. Lock it in place
using the 2 wooden screw provided with the smart safe. For fastening in place, the smart safe has 4 through
holes –2 on the back wall and 2 on the horizontal surface. The installer should use these, at his own
discretion, depending on where the smart safe is to be placed.
SMART SAFE 3001D-1HL/3HL/5HL
SMART SAFE 3001D 1HL/3HL/5HL
7-11
DRILLING DIAGRAMS
SMART SAFE 3001D-1HL
SMART SAFE 3001D-3HL
SMART SAFE 3001D-5HL
SMART SAFE 3001D-1HL/3HL/5HL
SMART SAFE 3001D 1HL/3HL/5HL
8-11
USER INSTRUCTIONS
Now the smart safe is delivered to the user with the door open and ready to use.
ASSIGNING OWNER CODE
Make sure that the smart safe has been initialized and was open
Press the *, 0and # button, input original owner code 123456, and then press #button.
Press the *, 0and #button again in 6 seconds, when 1St display on the screen, input a new owner
code as you like, then press the # button
When 2nd display on the screen, input the same owner code and press #button again
When dOnE display on the screen, it means owner code was set successful.
Only one owner code is allowed.
CHANGE AN OWNER CODE
Make sure that the smart safe was open.
Press the *, 0and # button, input owner code you set before, and then press #button.
When PrOG display, press the *, 0and # button
When 1St display, input a new code, and then press # button
When 2nd display, input the same code and press the # button again
When dOnE display, it means owner code has changed successful
NOTICE
Once the safe initialized, the Owner Code return to factory setting code 123456.
OPEN THE SAFE BY OWNER CODE
Press the *, 0and # button, input the owner code that you set before, and then press #button.
When OPEn display, the door has opened.
NOTICE
In Privacy Mode, just input correct Owner Code, safe will be open, and press # will be close.
ASSIGNING SERVICE CODE
Make sure that the smart safe is open.
Press the *, 0and # button, input owner code you set before, and then press #button.
When PrOG display, press the *, 1and # button
When 1St display, input a 1st service code, and then press # button
When 2nd display, input the 1st service code and press the # button again
When dOnE display, it means 1st service code has set successful
When dOnE was change into PrOG, press the *, 2and # button, the display will show 2nd, input
the 2nd service code, and then press #button, 2nd service code will be confirmed assignment.
NOTICE
Service Code assignment can be continue before display off
DELETE SOME SERVICE CODE
Make sure that the smart safe was open.
Press the *, 0and # button, input owner code, and then press #button.
When PrOG display, press the *, *, 1and # button
When dEL1 display, input owner code and press # button
SMART SAFE 3001D-1HL/3HL/5HL
SMART SAFE 3001D 1HL/3HL/5HL
9-11
When dOnE display and after one beep sounded, 1st service code has been deleted.
Service key can be deleted until the display off
DELETE ALL SERVICE CODE
Make sure that the smart safe was open.
Press the *, 0and # button, input owner code, and then press #button.
When PrOG display, press the *, *, *,and # button
When dEL ALL display, input owner code and press # button
When dOnE display and after one beep sounded, all of service codes have been deleted.
OPEN THE SAFE BY SERVICE CODE
Press the *, 1~5 and # button, input the corresponding service code that you set before, and then
press #button. (1~5 corresponding service code group 1 to group 5 )
When OPEn display, the door has opened.
SWITCH TO SHARE MODE/ PRIVACY MODE
Switch to SHARE MODE : Press the Reset button last one second, release the button if heard
“Beep”, continuous “Beep”will indicated Share Mode has been activated.
Switch to PRIVACY MODE : Press the Reset button last three seconds, release the button if heard
“Beep Beep”, continuous “Beep”will indicated Privacy Mode has been activated.
CLOSING AND OPENING THE SAFE IN SHARE MODE
To close the safe, the user must keep the door pressed and key the code onto the keyboard, followed by the
key #. This code may consist of anything between 4 and 9 digits, at the discretion of the user. To indicate that
the door has closed, CLSd will show up on the display.
To open the safe, you just need to key in the same code. As you set the code, if you key in a wrong digit, you
can press *to delete it and re-key in the right digit.
You can change the One-Time Code during any safe closing or opening cycle.
CLOSING AND OPENING THE SAFE IN PRIVACY MODE
To close the safe, the user must keep the door be pressed and press the button #. To indicate that the door
has closed, CLSd will show up on the display.
To open the safe, you just need to key in the Owner Code as you set before, In Privacy Mode, don’t need to
key in *, 0and # any more before key in Owner Code, but should be key in *, 1~5 and # button before
inputting any group of Service Code.
One Time Code will not available when safe work on Privacy Mode.
Questo manuale è adatto per i seguenti modelli
3
Indice
Manuali Sicuro popolari di altre marche
Honeywell
Honeywell 2077D - 1.21 Cubic Foot Anti-Theft Safe Manuale utente
Hornady
Hornady SnapSafe Trunk Safe II Manuale utente
SPORTS AFIELD
SPORTS AFIELD SA-HD5-BIO Manuale utente
Honeywell
Honeywell 5912 Manuale utente
Phoenix
Phoenix FS1280F Manuale utente
Phoenix
Phoenix SS0992K Scheda informativa del prodotto
