BE AC205 Manuale utente
o p e r a t i o n m a n u a l
AC205
2
t a b l e o f c o n t e n t s
Introduction
4 Using the Operators Manual
Specifications
4 Specifications
Product Identification
5 Record Identification Numbers
Safety
6 Safety Instructions
7 Safety Rules
7 Hazard Symbols and Meanings
10 General Safety Information
11 Spraying Precautions
11 Hose Precautions
Installation and Grounding
12 Installation and Location
13 Extension Cords
Assembly Instructions
14 Assembly
Product Features
15 Automatic ON/OFF
15 Regulator
15 Tank Pressure Gauge
15 Safety Valve
15 Tank Drain Fitting
15 Thermal Shutdown Switch
3
t a b l e o f c o n t e n t s
Operating Instructions
16 Initial Start Up
16 Start Up
16 Storage
16 Shut Down
Maintenance
17 When performing any maintenance or service
17 Daily
17 Weekly
17 Monthly
17 Six Months or 250 Operating Hours
17 Oil Change
Parts
18 AC205 Parts Diagram
19 AC205 Parts List
4
Using the Operator’s manual
Thank you for choosing our compressor. The manual gives information
with respect to operation and maintenance of the AC205 Compressor
and be sure to read it carefully first before operation.
Following the manual can ensure the user’s safety and get the best
results from the compressor. All information and diagrams in this manual
are in accordance with the newest products at the publishing time. We
strive for accuracy and this manual is accurate for the models described
at the time of printing. We reserve the right to make improvements or
changes at any time without notice or obligation.
Please keep this manual with the engine permanently, even if the engine
ownership is transferred.
Attention: Read through the complete
manual prior to the initial use of your
compressor.
i n t r o d u c t i o n
Specifications
· 4 Gallon Twin Tank Design
· Oil Lubricated for Extended Durability
· 3450 Rpm Induction Motor for Long Life
· 120V, 60Hz, 12.4Amps
· Air Delivery: 4.2CFM output @ 40 PSI and 3.5 CFM output @90 PSI
· Maximum Pressure: 125 PSI
· Thermal Overload Protection for safety
· High Flow regulator and Dual Pressure Gauges for Precision Air Flow
Control
· Control Panel, Two quick Connect Couplers
s p e c i f i c at i o n s
5
p r o d u c t i d e n t i f i c at i o n
Record Identification Numbers
Compressor
If you need to contact an Authorized Dealer or Customer Service line
(1-866-850-6662) for information on servicing, always provide the
product model and identification numbers.
You will need to locate the model and serial number for the machine and
record the information in the places provided below.
Date of Purchase:
Dealer Name:
Dealer Phone:
Product Identification Numbers
Model Number:
Serial Number:
6
s a f e t y
Safety Instructions
· Carefully read through the entire owners manual before operating this
compressor.
· Keep manual with important records for safety instructions, operating
procedures and warranty.
· After unpacking your new air compressor, please inspect it carefully for
any damage that may have occurred during transit.
· Do not operate this air compressor if damaged during shipment,
handling or misuse.
· Damage may result in bursting, which can cause serious injury or
property damage.
· All damaged parts must be repaired or replaced as needed prior to
operating this air compressor.
· Check to see that all nuts, bolts and fittings are secure.
· Check to see that the proper lubrication oil, which has been included
with the air compressor, is used to fill the compressor crankcase to the
proper level.
· Please contact our customer service department at the numbers listed
on the back of this instruction manual for any questions or comments
regarding this air compressor.
7
The safety alert symbol ( ) is used with a signal word (DANGER,
CAUTION, WARNING), a pictorial and/or a safety message to alert
you to hazards.
DANGER indicates a hazard which, if not avoided, will result in death
or serious injury.
WARNING indicates a hazard which, if not avoided, could result in
death or serious injury.
CAUTION indicates a hazard which, if not avoided, might result in
minor or moderate injury.
NOTICE indicates a situation that could result in equipment damage.
Follow safety messages to avoid or reduce the risk of injury or
death.
Hazard Symbols and Meanings
Save these Instructions
Safety Rules
s a f e t y
This is the safety alert symbol. It is
used to alert you to potential personal
injury hazards. Obey all safety
messages that follow this symbol to
avoid possible injury or death.
e x p l o s i o n
k i c k b a c k
f a l l f l u i d i n j e c t i o n m o v i n g p a r t s r e a d m a n u a l
h o t s u r f a c e w e a r e y e
p r o t e c t i o n
s l i p p e r y
f i r e e l e c t r i c s h o c k t o x i c f u m e s
8
s a f e t y
WARNING
AIR TANK WARNING: Drain liquid from air tank daily,
or after each use, using the drain valve located on the
bottom of the lower air tank. Failure to properly drain
liquid from the tank will cause rust from moisture build-
up, which weakens the tank and could lead to a violent
tank explosion, Periodically inspect the tanks for unsafe
conditions such as corrosion.
Never attempt to repair or make modifications to the tank or its at-
tachments. Welding, drilling or any other modifications may weaken
the tank, which may result in damage from rupture or explosion. Never
remove or attempt to adjust the pressure switch, safety valve, or other
factory set operating pressures.
WARNING
FIRE WARNING: Avoid dangerous environments. Do
not use compressor near gasoline or other flammable
materials. Keep work area well lit. Normal sparking of
a motor or sparking from grinding metal could ignite
fumes. Do not spray flammable materials in the vicinity
of an open flame or other ignition source, including the
air compressor itself. Do not direct paint or other spray
material towards the compressor.
Read and follow all safely instructions for the material you are spray-
ing. Be sure to use an approved respirator designed for use with your
specific application.
WARNING
BREATHABLE AIR WARNING: This air compressor in
not designed, nor intended for the supply of breathable
quality air. Air produced by this unit may contain carbon
monoxide or other toxic vapors.
Do not inhale air from the compressor or from a breathing device con-
nected to it.
9
s a f e t y
WARNING
ELECTRIC SHOCK WARNING: When using electric
powered tools, machines or equipment, basic safety
precautions should always be followed to minimize the
risk of electrical shock or personal injury to yourself and
others.
This air compressor is powered by electricity and should never be used
without properly grounded electrical connections. Do not use in wet or
damp locations or expose to rain.
WARNING
AIR TOOLS AND ACCESSORIES WARNING: Do
not exceed the pressure rating of any air tools, spray
guns, air accessories, or inflatables. Excess pressure
can cause them to explode, resulting in serious injury.
Follow the manufacturers recommended pressure set-
tings for all air tools and air accessories.
WARNING
Do not direct compressed air stream at people or pets.
The powerful compressed air stream can damage
exposed skin and easily propel loose dirt and other
small objects. Always wear eye protection that meets
ANSI Z28.1 specifications.
WARNING
Keep hands and fingers away from exposed metal parts
on a running air compressor. Air compressors gener-
ate significant heat during normal operation, which can
cause serious burns. The compressor will remain hot for
some time after operation and should not be touched or
moved until cool.
10
s a f e t y
General Safety Information
Do not operate unit if damaged during shipping, handling or use. Damage
may result in bursting and cause injury or property damage.
Since the air compressor and other components (filters, lubricators,
hoses, etc.) used, make up a high pressure pumping system, the follow-
ing safety precautions must be observed at all times:
1. Read all manuals included with this product carefully. Be thoroughly
familiar with the controls and the proper use of the equipment.
2. Follow all local electrical and safety codes
3. Only persons well acquainted with these rules of safe operation should
be allowed to use the compressor.
4. Keep visitors away and NEVER allow children in the work area.
5. Wear safety glasses and use hearing protection when operating the
pump or unit.
6. Do not stand on or use the pump or unit as a handhold.
7. Before each use, inspect compressed air system and electrical
components for signs of damage, deterioration, weakness or leakage.
Repair or replace defective items before using.
8. Check all fasteners at frequent intervals for proper tightness.
WARNING
Compressor parts may be hot even if the unit is
stopped.
9. Keep fingers away from a running compressor; fast moving and hot
parts will cause injury and/or burns.
10. If the equipment should start to abnormally vibrate, STOP the engine/
motor and check immediately for the cause. Vibration is generally a
warning of trouble.
11. To reduce fire hazard, keep engine/motor exterior free of oil, solvent,
or excessive grease. Never remove or attempt to adjust safety valve.
Keep safety valve free from paint and other accumulations.
12. Never attempt to repair or modify a tank! Welding, drilling or any other
WARNING
Motors, electrical equipment and controls can cause
electrical arcs that will ignite a flammable gas or vapor.
Never operate or repair in or near a flammable gas or
vapor. Never store flammable liquids or gases in the
vicinity of the compressor.
Indice
Altri manuali BE compressore d'aria
