BE LS5TELL Manuale utente
Operation Manual
ELECTRIC
LOG SPLITTER
LS5TELL
WARNING
This product contains chemicals known to the State of California to cause cancer and
birth defects or other reproductive harm.
WARNING
This product contains lead, a chemical known to the State of California to cause birth
defects or other reproductive harm. Wash your hands after handling this product.
2
Introduction
4 Using the Operator’s Manual
Product Identification
5 Record Identification Numbers
6 Receipt and Inspection
Safety
7 Safety Instructions
7 Hazard Symbols and Meanings
9 Safety Warnings
10 General Safety
10 Work Area
11 Operator Zone
12 Maintenance Safety
13 Fire Prevention
Electrical Safety
14 Extension Cords
14 Electrical Connection
15 Speed and Wiring
15 Grounding Instructions
Overview
16 Overview
Assembly
17 Assembly
Pre-Operation
18 Before using the log splitter
19 Log Prepratation
19 Checking the oil level
TABLE OF CONTENTS
3
Operation
20 Operating Instructions
22 Splitting Logs
22 Transportation
22 Storage
Maintenance
24 General Maintenance
24 Sharpening the Wedge
24 Lubrication
24 Replacing Hydraulic Oil
Troubleshooting
26 Troubleshooting Chart
Specifications
27 Technical Specs
Diagram
28 Diagram
Parts List
29 Parts List
TABLE OF CONTENTS
4
Using the Operator’s manual
Thank you for purchasing a BE Log Splitter. Your machine is designed
for long life, dependability, and the top performance you demand! Please
take time now to read through this manual so you better understand the
machine’s operation, maintenance and safety precautions.
Everyone who operates this machine must read and understand this
manual. The time you take now will prolong your machine’s life and
prepare you for its safe operation. Enjoy the exceptional performance of
your BE Log Splitter, the industry leader!
The manufacturer reserves the right to make improvements in design
and/or changes in specifications at any time without incurring any
obligation to install them on units previously sold.
Attention: Read through the complete manual
prior to the initial use of your compressor.
INTRODUCTION
5
Record Identification Numbers
LOG SPLITTER
If you need to contact an Authorized Dealer or Customer Service line
(1-866-850-6662) for information on servicing, always provide the
product model and identification numbers.
You will need to locate the model and serial number for the machine and
record the information in the places provided below.
Date of Purchase:
Dealer Name:
Dealer Phone:
Product Identification Numbers
Model Number:
Serial Number:
PRODUCT IDENTIFICATION
6
Receipt and Inspection
Before signing the delivery receipt, inspect for damage and missing parts.
If damage or missing parts are apparent, make the appropriate notation
on the delivery receipt, then sign the receipt. Immediately contact the
carrier for an inspection. All material must be held in the receiving location
for the carrier’s inspection. Delivery receipts that have been signed
without a notation of damage or missing parts are considered to
be delivered “clear.” Subsequent claims are then considered to be
concealed damage claims. Settle damage claims directly with the
transportation company.
If you discover damage after receiving the air compressor (concealed
damage), the carrier must be notified within 15 days of receipt and an
inspection must be requested by telephone with confirmation in writing.
On concealed damage claims, the burden of establishing that the
compressor was damaged in transit reverts back to the claimant.
Read the compressor nameplate to verify it is the model ordered, and
read the motor nameplate to verify it is compatible with your electrical
conditions. Make sure electrical enclosures and components are
appropriate.
PRODUCT IDENTIFICATION
7
The safety alert symbol ( ) is used with a signal word (DANGER,
CAUTION, WARNING), a pictorial and/or a safety message to alert you
to hazards.
DANGER WILL cause DEATH, SEVERE INJURY or substantial
property damage.
WARNING CAN cause DEATH, SEVERE INJURY or substantial
property damage.
CAUTION WILL or CAN cause MINOR INJURY or property damage.
NOTICE indicates a situation that could result in equipment damage.
Follow safety messages to avoid or reduce the risk of injury or
death.
Save these Instructions
SAFETY RULES
This is the safety alert symbol. It is used to alert
you to potential personal injury hazards. Obey
all safety messages that follow this symbol to
avoid possible injury or death.
SAFETY
8
SYMBOL NAME EXPLANATION
V Volts Voltage
A Amperes Current
Hz Hertz Frequency (cycles per second)
W Watt Power
min Minutes Time
Alternating Current Type of current
= Direct Current Type/characteristic of a current
no No Load Speed Rotational speed, at no load
Class Ii Construction Double-insulated construction
.../min Per Minute Revolutions, strokes, surface speed, orbits etc., Per
minute
Wet Conditions Alert Do not expose to rain or use in damp locations.
Read The Operator’s Manual To reduce the risk of injury, user must read and
understand operator’s manual before using this
product.
Eye, Face & Ear Protection Always wear safety goggles or safety glasses with
side shields, earplugs and a face shield when
operating this product.
Safety Alert Precautions that involve your safety.
Wear Gloves Always wear nonslip, heavy-duty protective gloves
when operating this product.
Weat Safety Footwear Always wear nonslip safety footwear when operat-
ing this product.
Keep Bystandards Away Always keep bystanders at least 25 ft. (7.5 M) away.
Keep Hand Away Always keep hands away from the wedge and the
ram.
Pinch Point Never touch the cylinder bed, ram, or wedge during
machine operation.
Rotating & Moving Parts Alert Beware of rotating and moving parts, serious injury
could occur.
Electric Shock Alert Never touch damaged or exposed wires while the
machine is connected to a power source.
Some of the following symbols may be used on this tool. Please study
them and learn their meaning. Proper interpretation of these symbols will
allow you to operate the tool better and safer.
SAFETY
9
WARNING
• NEVER use this log splitter for any purpose other than splitting wood.
It is designed for this use only. Any other use can cause serious injury
or death.
• BEFORE operating this log splitter make sure that you wear safety
gear such as goggles or safety glasses, steel toed shoes and tight
fitting gloves (without loose cuffs or draw strings). Always wear a
protective hearing device when operating this log splitter.
• NEVER wear loose clothing or jewelry that can be caught by moving
parts of the log splitter. Keep clothing and hair away from all moving
parts when operating this log splitter.
• Make sure that all safety warning decals are in good condition and
readable.
WARNING
• To avoid serious personal injury, do not attempt to use this product
until you read thoroughly and understand completely the operator’s
manual. If you do not understand the warnings and instructions in the
operator’s manual, do not use this product. Call customer service for
assistance.
WARNING
• Read and thoroughly understand all instructions and safety
information before assembling or operating this log splitter. Failure
to do so may cause serious injury or death. Do not allow anyone to
operate this log splitter who has not read this manual. As with all
power equipment, a log splitter can be dangerous if assembled or
used improperly. Do not operate this log splitter if you have doubts or
questions concerning safe operation.
WARNING
• The operation of any power tool can result in foreign
objects being thrown into your eyes, which can result
in severe eye damage. Before beginning power tool
operation, always wear safety goggles or safety
glasses with side shields and, when needed, wear
a full face shield and earplugs. We recommend a
Wide Vision Safety Mask for use over eyeglasses or
standard safety glasses with side shields. Always use
eye protection which is marked to comply with ANSI
Z87.1.
SAFETY
10
WARNING
Failure to follow these instructions may result in serious injury or death.
• ALWAYS read the operator’s manual before operation.
• NEVER allow children to operate this log splitter. NEVER allow adults
lacking proper instructions and understanding to operate this log
splitter.
• KEEP all people and pets a minimum of 25 feet away from your work
area when operating this log splitter. Only the operator is to be near
the log splitter during use.
• ALWAYS wear safety glasses.
• NEVER activate the control until all people are clear of the work area.
• NEVER use in an explosive atmosphere.
• GUARD against electrical shock by preventing body contact with
grounded surfaces. For example: pipes, radiators, ranges, refrigerator
enclosures.
• KEEP guards in place and in good working order.
• USE the proper extension cord. Make sure your extension cord is in
good condition.
• NEVER operate the log splitter when under the influence of alcohol,
drugs or medication.
• NEVER allow a person who is tired or otherwise not alert to operate
the log splitter.
• USE only an electrical circuit having adequate capacity as
recommended by the log splitter manufacturer.
• “BLOWING” a fuse or tripping a circuit breaker is usually a warning
that you are overloading the machine or have too many devices taking
power from the circuit, or both. Do NOT install a higher capacity fuse!
WARNING
• NEVER operate the log splitter on slippery, wet, muddy or icy ground.
• ONLY operate your log splitter on level ground. Operating on a slope
could cause the log splitter to roll over or logs to fall off.
• NEVER attempt to move your log splitter over hilly or uneven terrain.
• ALWAYS block the wheels to prevent movement of the log splitter
while in operation.
• NEVER leave tools or pieces of wood on the tool while it is in
operation.
• ONLY operate your log splitter in daylight or under good artificial light.
• ALWAYS keep the work area clean. Remove split wood around your
log splitter immediately so that you don’t stumble over it.
GENERAL SAFETY
WORK AREA
SAFETY
Indice
Manuali Spaccalegna popolari di altre marche
Scheppach
Scheppach OX 3-1000 Istruzioni per il montaggio
Swisher
Swisher 21200 Manuale utente
Elem Garden Technic
Elem Garden Technic FBHT65-22TCH Manuale utente
Champion Power Equipment
Champion Power Equipment 90720 Manuale
Boss Industrial
Boss Industrial ES5T20 Manuale utente
Villager
Villager LSP 12 T Manuale utente
