Beckhoff CX2500-0070 Manuale utente
Manual | EN
CX2500-0070
USB 3.0 Module
2/10/2021 | Version: 1.1
Table of contents
CX2500-0070 3Version: 1.1
Table of contents
1 Foreword ....................................................................................................................................................5
1.1 Notes on the documentation..............................................................................................................5
1.2 Safety instructions .............................................................................................................................6
1.3 Documentation issue state ................................................................................................................7
2 Product overview.......................................................................................................................................8
2.1 Intended use......................................................................................................................................8
2.2 System overview ...............................................................................................................................9
2.3 CX2500-0070 - Technical data..........................................................................................................9
3 Mounting and wiring................................................................................................................................10
3.1 Unpacking, installation and transport ..............................................................................................10
3.2 Dimensions......................................................................................................................................11
3.3 Attaching the system interface to the CX20x0 system ....................................................................12
3.4 Installation on the mounting rail.......................................................................................................12
3.5 Mounting the module lock................................................................................................................15
3.6 USB connections .............................................................................................................................17
4 Commissioning / Configuration .............................................................................................................19
4.1 Switching on and off ........................................................................................................................19
5 Error handling and diagnostics..............................................................................................................20
5.1 Faults...............................................................................................................................................20
6 Decommissioning....................................................................................................................................21
6.1 Disassembly and disposal ...............................................................................................................21
7 Appendix ..................................................................................................................................................23
7.1 Certifications....................................................................................................................................23
7.2 Support and Service ........................................................................................................................24
Table of contents
CX2500-00704 Version: 1.1
Foreword
CX2500-0070 5Version: 1.1
1 Foreword
1.1 Notes on the documentation
This description is only intended for the use of trained specialists in control and automation engineering who
are familiar with applicable national standards.
It is essential that the documentation and the following notes and explanations are followed when installing
and commissioning the components.
It is the duty of the technical personnel to use the documentation published at the respective time of each
installation and commissioning.
The responsible staff must ensure that the application or use of the products described satisfy all the
requirements for safety, including all the relevant laws, regulations, guidelines and standards.
Disclaimer
The documentation has been prepared with care. The products described are, however, constantly under
development.
We reserve the right to revise and change the documentation at any time and without prior announcement.
No claims for the modification of products that have already been supplied may be made on the basis of the
data, diagrams and descriptions in this documentation.
Trademarks
Beckhoff®, TwinCAT®, EtherCAT®, EtherCAT G®, EtherCAT G10®, EtherCAT P®, Safety over EtherCAT®,
TwinSAFE®, XFC®, XTS® and XPlanar® are registered trademarks of and licensed by Beckhoff Automation
GmbH.
Other designations used in this publication may be trademarks whose use by third parties for their own
purposes could violate the rights of the owners.
Patent Pending
The EtherCAT Technology is covered, including but not limited to the following patent applications and
patents:
EP1590927, EP1789857, EP1456722, EP2137893, DE102015105702
with corresponding applications or registrations in various other countries.
EtherCAT® is a registered trademark and patented technology, licensed by Beckhoff Automation GmbH,
Germany
Copyright
© Beckhoff Automation GmbH & Co. KG, Germany.
The reproduction, distribution and utilization of this document as well as the communication of its contents to
others without express authorization are prohibited.
Offenders will be held liable for the payment of damages. All rights reserved in the event of the grant of a
patent, utility model or design.
Foreword
CX2500-00706 Version: 1.1
1.2 Safety instructions
Safety regulations
Please note the following safety instructions and explanations!
Product-specific safety instructions can be found on following pages or in the areas mounting, wiring,
commissioning etc.
Exclusion of liability
All the components are supplied in particular hardware and software configurations appropriate for the
application. Modifications to hardware or software configurations other than those described in the
documentation are not permitted, and nullify the liability of Beckhoff Automation GmbH & Co. KG.
Personnel qualification
This description is only intended for trained specialists in control, automation and drive engineering who are
familiar with the applicable national standards.
Description of symbols
In this documentation the following symbols are used with an accompanying safety instruction or note. The
safety instructions must be read carefully and followed without fail!
DANGER
Serious risk of injury!
Failure to follow the safety instructions associated with this symbol directly endangers the life and health of
persons.
WARNING
Risk of injury!
Failure to follow the safety instructions associated with this symbol endangers the life and health of per-
sons.
CAUTION
Personal injuries!
Failure to follow the safety instructions associated with this symbol can lead to injuries to persons.
NOTE
Damage to the environment or devices
Failure to follow the instructions associated with this symbol can lead to damage to the environment or
equipment.
Tip or pointer
This symbol indicates information that contributes to better understanding.
Foreword
CX2500-0070 7Version: 1.1
1.3 Documentation issue state
Version Changes
1.1 notes on max. power supply for the ports changed
1.0 updated Version
0.1 first Version
Product overview
CX2500-00708 Version: 1.1
2 Product overview
2.1 Intended use
The CX20x0 device series is a modular control system designed for DIN rail installation. The system is
scalable, so that the required modules can be assembled and installed in the control cabinet or terminal box
as required.
Only switch the PC off after closing the software
Before the Embedded PC is switched off, the software currently running on it should be stopped properly in
order to avoid data loss on the hard disk. Please read the section on “Switching off”.
Switch off all system components and uncouple the Industrial PC from the system if the PC is not used for
control purposes, e.g. during a function test. To disconnect first pull the first terminal behind the power
supply unit (optional), then pull the connectors of the fieldbus connections.
System components that have been switched off must be secured against being switched on again.
The Embedded PC’s power supply unit must be supplied with 24VDC.
NOTE
Damage to the environment or devices
Do not exchange any parts when under power! The exchange of controller parts when live can lead to
short-circuits or overvoltages. These can damage the controller itself and connected peripherals (terminals,
monitors, input devices, etc.).
When components are being fitted or removed, the supply voltage must be switched off.
Software knowledge
NOTE
System malfunctions
Mandatory software knowledge! Every user must be familiar with any of the functions of the software in-
stalled on the PC that he can reach.
Product overview
CX2500-0070 9Version: 1.1
2.2 System overview
CX2500-00xx System modules
The system modules for the CX2000 family are connected to the CPU on the left-hand side via a multi-pin
connector. Internally they are connected via PCI Express. Up to four modules can be connected in any
order. The CX2500-0020 audio module has jack plug (5 x 3.5 mm) and cinch plug for digital signals (SPDIF).
Up to 7.1 multi-channel audio can be used. Serial interfaces can be added with the modules CX2500-0030
(RS232) and CX2500-0031 (RS422/RS485). The CX2500-0060 module provides two further independent
Gbit Ethernet interfaces. The CX2500-0070 module can be used to add up to four further USB 3.0 interfaces.
The expansion modules for the CX2000 family are connected to the CPU on the right-hand side via a multi-
pin connector. Up to two CX2550-0010 CFast modules can be connected, so that a total of up to three CFast
slots are available.
2.3 CX2500-0070 - Technical data
The system interface CX2500-0070 expands a CX20x0 by four further USB interfaces.
Technical data CX2500-0070
Interfaces 4 x USB 3.0, Type A
Power supply via system bus (via power supply module
CX2100-0xxx)
Current supply max. 900 mA each Port max. 2000 mA total current
max. Power loss 2.4 W
Dielectric strength 500 V (supply / internal electronics)
Dimensions (W x H x D) 24 mm x 99 mm x 54,5 mm
Weight approx. 195 g
Operating/storage temperature -25° C ... +60° C / -40° C ... +85° C
Relative humidity 95% no condensation
Vibration/shock resistant conforms to EN 60068-2-6 / EN 60068-2-27
EMC immunity/emission conforms to EN 61000-6-2/EN 61000-6-4
Protection class IP 20
Further Information: www.beckhoff.de/CX2000
Mounting and wiring
CX2500-007010 Version: 1.1
3 Mounting and wiring
3.1 Unpacking, installation and transport
The specified storage conditions must be adhered to (see "Technical data").
Dimensions and weight of the individual modules
Dimensions (W x H x D): 24 mm x 100 mm x 55 mm
Weight: approx. 195 g (system interface)
Unpacking
Proceed as follows to unpack the unit:
1. Remove packaging.
2. Do not discard the original packaging. Keep it for transporting the device in the future.
3. Check the delivery for completeness by comparing it with your order.
4. Please keep the associated paperwork. It contains important information for handling the unit.
5. Check the contents for visible shipping damage.
6. If you notice any shipping damage or inconsistencies between the contents and your order, you
should notify Beckhoff Service.
NOTE
Danger of damage to the device!
During transport in cold conditions, or if the device is subjected to extreme temperature differences, con-
densation on and inside the device must be avoided. Prior to operation, the device must be allowed to
slowly adjust to room temperature. Should condensation occur, a delay time of approximately 12 hours
must be allowed before the unit is switched on.
Installation
The devices are designed for installation in control cabinets.
Shipping and relocation
Despite the robust design of the unit, the components are sensitive to strong vibrations and impacts. During
transport, your computer should therefore be protected from excessive mechanical stress. Therefore, please
use the original packaging.
Indice
Altri manuali Beckhoff Accessori
