IMPORTANT INSTRUCTIONS
BEDJET USER OPERATING MANUAL
Revision 1.0 www.bedjet.com P a g e | 4
9. DO NOT plug device into any other cord connected device, such as a power strip, surge
protector, multiple outlet adapters or outlet-type air fresheners. The use of such devices
may create a fire hazard. Plug unit directly into a wall outlet only.
10. Always plug this device directly into a wall outlet/receptacle. Never use with an extension
cord or relocatable power tap (outlet/power strip).
11. Do not operate this device with a damaged cord or plug or after the device malfunctions or
has been dropped or damaged in any manner. Return device to authorized service facility
for examination, electrical or mechanical adjustment or repair.
12. To disconnect device, make sure device is not currently operating in heat or cool mode, turn
Power Switch to OFF, then remove plug from outlet.
13. Always unplug device when not in regular use. Unplug power cord before servicing or
moving the device. WARNING: DO NOT DEPEND ON THE ON/OFF SWITCH AS THE SOLE
MEANS OF DISCONNECTING POWER WHEN SERVICING OR MOVING THE DEVICE. ALWAYS
UNPLUG THE POWER CORD.
14. Do not insert or allow fingers or foreign objects to enter any ventilation or exhaust opening
as it may cause an electric shock, fire, or damage the device. Do not block or tamper with
the device in any manner while it is in operation.
15. To prevent a possible fire, do not block air intakes or exhaust in any manner. Do not place
unit on soft surfaces, like a bed, where openings may become blocked.
16. Always place the device on a stable, flat, level surface when operating, to avoid the chance
of the device overturning. Locate the power cord so the device or other objects are not
resting on it. Do not run cord under carpeting. Do not cover cord with throw rugs, runners,
or similar coverings. Do not route cord under furniture or appliances. Arrange cord away
from traffic area and where it will not be tripped over.
17. This device has hot and arcing or sparking parts inside. Do not use the BedJet in areas where
gasoline, paint, or flammable liquids are used or stored. It must NOT be used in potentially
dangerous locations such as flammable, explosive, chemical-laden or wet atmospheres. This
device is intended for residential bedroom use ONLY.
18. This device is not intended for use in wet or damp locations. This device is NOT INTENDED
for use in bathrooms, laundry areas and similar indoor locations. Never locate the device
where it may fall into a bathtub or other water container.
19. This device is not intended for use as a room air heater.
20. Do not use device outdoors.
21. Keep the cord away from heated surfaces.
22. Do not operate where aerosol (spray) products are being used or where oxygen is being
administered.
