Beebar G2 Manuale utente
- 0 -
Singing guide to the CALF
Speaker Microphone
- 1 -
Basic Information
Beebar Speaker Microphone G2 ×1
Charging Cable ×1
Audio Cable ×1
- 2 -
Accessories
USB charging cable
Connect mobile power, computer USB
port or power adapter to charge
Audio cable
Universal for Android and iOS systems
For some mobile devices, an audio adapter may be
required
- 3 -
Features
Button Description
1.Work indicator
3.Speaker volume adjustment button
5.Charging cable port
7.Audio cable port
2.Power switch / Sound effect switch button
4.Microphone volume adjustment button
6.3.5mm headphone jack
8.Bluetooth reset button
- 4 -
1. Work indicator
When the power is on, the white light is on;
When the power is off, the white light is off;
When charging, the red light is on.
2. Power switch / Sound effect switch button
Press and hold for 2 seconds to turn the power on or off.
In the power-on state, every time you press the sound switching button, the sound effect
will be shifted as follows: 原音サウンド→Pops/ロックサウンド→バラードサウン
ド→演歌サウンド→司会サウンド→スーパーミックスサウンド→アニメサウンド
→モンスターサウンド→原音サウンド ( Original sound →Pop or Rock → Slow
Beat → Folk or Military → Host → Super Reverb → Anime sound → Monster Sound→
Original sound ). After leaving the factory, the default is Pops/ロックサウンド(Pop or
Rock sound effect).
3. Speaker volume adjustment button
Sixteen positions for adjusting the volume of the speaker.
4. Microphone volume adjustment button
Eight positions for adjusting the volume of the microphone pickup.
- 5 -
Product Parameters
【Main chip】Dual-core digital DSP
【Bluetooth version】Bluetooth 4.2
【Reverb mode】Reverb
【Digital equilibrium】EQ adjustment
【Recording mode】listen wet, record wet
【RF shielding】Anti-cell phone / SMS interference
【Head outer diameter】14.0mm
【Head type】Capacitor
【Sensitivity】-37dB
【Frequency response】20~20kHz
【Directivity】Super cardioid
【Speaker power】2×5W
【Battery capacity】2600mAh
【Charging parameters】DC 5V 1A
【Weight】405g
【Speaker impedance】4Ω
- 6 -
Function Display
Song listening mode
1. Long pressing the power switch for 2 seconds, the white indicator will light on, indicating
a successful powering on.
2. Turn the microphone volume to the minimum and turn off the pickup function of
microphone;
3. Connect the device to mobile phone Bluetooth. Turn on the mobile phone Bluetooth and
search for the device, then click "Beebar Speaker Microphone G2" to connect;
4. Open a Music/Live/Video APP on your phone and adjust the volume of the phone or the
speaker volume of the microphone to an appropriate one;
5. Play a music as you wish.
Special Instruction:
After long pressing the microphone volume adjustment button○
-for 2 seconds, the
microphone pickup function will be turned off directly to prevent the externally played music
from being picked up by the microphone, which may result in secondary playback and affect
the sound quality.
- 7 -
Wireless singing mode
1. Long pressing the power switch for 2 seconds, the white indicator will light on,
indicating a successful powering on.
2. Connect the device to mobile phone Bluetooth. Turn on the mobile phone Bluetooth and
search for the device, then click "Beebar Speaker Microphone G2" to connect;
3. Open a Music/Live/Video APP on your phone, adjust the microphone volume and
speaker volume to the appropriate one, switch between different sound effects, and start to
experience different singing effects;
4. Start your wireless singing journey.
Special Instruction:
The digital audio DSP used by the microphone will memorize the singing settings of the G2
mic (volume, sound effects, etc.). When the power is turned on again, the singing settings
(volume, sound effects, etc.) will be the same as before powering off.
The wireless singing mode does not support the Bluetooth song recording function.
- 8 -
Pair Mode （Dual wireless singing mode）
1. Turn on the power switches of the two Beebar Speaker Microphones, press and hold the
Bluetooth reset button on the bottom of the microphone, and disconnect the Bluetooth
connection between the microphone and other devices;
2. Press and hold the microphone volume adjustment button ○
+of one of the Beebar
Speaker Microphones for 3 seconds, and the work indicator will flash quickly. After hearing
the two microphones prompting "ペアカラオケモード"(Pair Mode on) ,it indicates that the
two microphones are successfully paired;
3. Turn on the Bluetooth of your mobile phone and search for the device. When you find
"Beebar Speaker Microphone G2", click for Bluetooth connection;
4. Open a Music/Live/Video APP , adjust the volume of the phone, microphone and speaker,
and switch between different sound effects until all parameters are in a suitable state;
5. A duo singing tour start now!
Special Instruction:
1. The dual wireless singing mode requires two BeeBar Speaker Microphones. This mode
does not currently support pairing of more than two devices;
2. After the two microphones are paired successfully, shutting down or resetting the
Bluetooth of either microphone will end the pairing state. To re-pair, repeat the above steps.
3. The dual wireless singing mode does not support Bluetooth song-recording function.
- 9 -
Wired song-recording mode
1. Connect the microphone and mobile phone through the audio cable, and connect the
headset;
2. Long press the power switch for 2 seconds, the white indicator will light on, indicating a
successful powering on.
3. Open a Music/Live/Video APP on your phone, adjust the microphone volume and
speaker volume to the appropriate one, switch between different sound effects, and start to
experience different recording effects;
4. Start you song-recording journey now!
Special Instruction:
In wired song recording mode, the microphone’s speaker function will be automatically turned
off. You can hear sounds by the headphone.
Indice
