BeeSecure LoRa R311A Manuale utente
PA G E |1
B e e S ec u r e |LORA “R311A”GE T T I N G ST A R T E D
Contents
Part A: Account Activation..................................................................... 2
Part B: Pair Your Door Sensor with an Asset ....................................... 2
Part C: Set Location of Device in App................................................... 3
Part D: Connect your “R311A” ............................................................. 4
Step 1: Power on the R311A............................................................................................. 4
Step 2: First Time Connecting........................................................................................... 5
Step 3: Replacing the Batteries ........................................................................................ 5
Help..................................................................................................................................... 5
Part E: Install the Sensor on a Door ..................................................... 6
Part F: Device Operation....................................................................... 7
Part G: Track Your Assets ..................................................................... 7
Track your BeeSecure-Guarded Assets ............................................................................7
PA G E |2
B e e S ec u r e |LORA “R311A”GE T T I N G ST A R T E D
Part A: Account Activation
Please see the BeeSecure Setup Guide at beesecure.ca/getting-started to setup your
account on app.beesecure.ca.
Part B: Pair Your Door Sensor with an Asset
First, create a new asset in the BeeSecure app. This asset will be the door that you want to
monitor.
To create an asset, go to the “Listing”menu in the app by opening the menu on the right
and clicking on “Assets” →“Listing”:
Next, add an asset by clicking the (+) icon on the top right of the screen.
After you created a new asset, click the hardware icon ( ) for your new asset and type in
the ID for your door sensor. The ID is located on the box your sensor came in and is also
found on the back of the sensor, labeled with DevEUI.
Asset ID
PA G E |3
B e e S ec u r e |LORA “R311A”GE T T I N G ST A R T E D
Part C: Set Location of Device in App
The “R311A” does not have a GPS to find its own location, so in the BeeSecure app you will
have to manually set its location so it will show up properly on the map.
After pairing your device to an asset in the BeeSecure app in Part B, set the location of this
asset by manually creating an asset event:
i) Go to the “Assets” page in the BeeSecure app, and click the icon
ii) Click the icon on the top right to create an event
iii) Type in the GPS location (latitude, longitude) into the “GPS Location” box. If you are
standing at the location with your phone or computer, you can click the icon to
get your current location, then copy and paste it into the “GPS Location” box.
iv) Click the “Create Asset Event” button at the bottom of the page. Now you should see
the location of this device on the Asset Map.
i
)
ii
iii
iv
PA G E |4
B e e S ec u r e |LORA “R311A”GE T T I N G ST A R T E D
Part D: Connect your “R311A”
Step 1: Power on the R311A
i) Insert the batteries into the sensor by opening the back of the sensor and inserting
the two batteries face up. You might need a flat head screwdriver to push the tab to
open the back of the sensor.
ii) Turn on the sensor by pressing and holding one of the Function Keys (doesn’t matter
which one) until the green indicator light flashes. This should take a few seconds
iii) You can power off the sensor by pressing down both function keys at once for about
10 seconds until the green light starts flashing rapidly.
PA G E |5
B e e S ec u r e |LORA “R311A”GE T T I N G ST A R T E D
Step 2: First Time Connecting
i) After you turn on the sensor, it will try to join the LoRa network. Once it joins, the
green indicator will flash.
ii) At any time, you can check if the sensor has joined the LoRa network by pressing a
releasing a function key. If the light flashes green, then it has joined. If it flashes red,
then is has not joined the LoRa network.
Step 3: Replacing the Batteries
i) The R311A sensor uses two off-the-shelf 3V CR2450 button batteries. These can be
purchased at your local hardware store.
Help
If the device can’t get LoRa reception and isn’t sending data to the BeeSecure app, make
sure the device has an unobstructed view of a LoRa gateway. If metal or concrete is
between the tracker and gateway, the signal range will be reduced.
PA G E |6
B e e S ec u r e |LORA “R311A”GE T T I N G ST A R T E D
Part E: Install the Sensor on a Door
PA G E |7
B e e S ec u r e |LORA “R311A”GE T T I N G ST A R T E D
Part F: Device Operation
i) When door opening is detected, the device will transmit and alert to the BeeSecure
app.
ii) If nothing is detected by the sensor, the device will report its battery status and
temperature once every 2 hours.
iii) A low battery alert will appear in the BeeSecure app if the battery is low. Note that
extreme cold temperatures or the use of incorrect types of batteries could set off this
alert prematurely.
Part G: Track Your Assets
Track your BeeSecure-Guarded Assets
i) You can customize the notifications you receive from your asset trackers via the
‘ASSETS’ →‘LISTING’ screen –click the settings icon ( ) next to your asset
ii) Under ‘Notifications’ you can:
a. Flag your asset as stolen (only do so in the case of a confirmed theft). Coming
soon, law enforcement will be directly notified when your asset is stolen.
b. Edit the date your asset was stolen
c. Adjust the notification interval for when you will be notified that your asset has
started moving.
For example, if set to 1 hour, you will be notified that your asset started
moving only once it has been stationary for 1 hour. This helps prevent false
alarms and limits the number of text messages sent.
Don’t worry, your asset will still be tracked regardless of if you receive a
notification or not.
PA G E |8
B e e S ec u r e |LORA “R311A”GE T T I N G ST A R T E D
Altri manuali per LoRa R311A
1
Indice
Altri manuali BeeSecure Accessori
