BeeWi BWA211 Manuale utente
- 11N Wireless USB Adapter -
User’s guide
ENGLISH
FRANCAIS
DEUTSCH
ITALIANO
ESPANOL
PORTUGUES
2
14
26
38
50
62
Thank you for purchasing the BWA211 wireless USB adapter from
BEEWI. Please read the following instructions to learn how to configure
and use more effectively your wireless USB adapter.
BEEWI is a registered trademark. Other trademarks mentioned herewith
are owned by their proprietors. All other product or service names are the
property of their respective owners.
The use of wireless devices and their accessories may be prohibited or
restricted in certain areas. Always obey the laws and regulations on the
use of these products.
This product is covered by a 2-year product warranty which is valid from
the date of purchase. Please visit our website www.bee-wi.com for more
© VOXLAND, 2009.
European Union Directives Conformance Statement
Hereby, VOXLAND declares that this product is in compliance with:
• The essential requirements and other relevant provisions of Directive
1999/5/EC
• All other relevant EU Directives
You can view your product’s Declaration of Conformity (DoC) to Directive
1999/5/EC (to R&TTE Directive) at www.bee-wi.com.
Introduction
Thank you for purchasing the BWA211 wireless USB adapter
from BEEWI. Please read the following instructions to learn
how to configure and use more effectively your wireless USB
adapter.
Package Contents
Chapter 1 : Installation
Caring for the environment by recycling
When you see this symbol on a product, do not dispose the product with
household waste. Do not dispose of electrical devices or accessories with
your household waste. In some countries or regions, collection systems are
set up to handle electrical and electronic waste items. Contact your regional
authorities for more details.
The following steps on Setup Wizard are based on Windows XP as exam-
ple. Screen shots are in English.
1. Please insert the Wireless USB Adapter into the USB port of your computer.
- One W311U 11N Wireless USB Adapter - One CD-ROM
2. “Found New Hardware” system dialogue appears; select “Cancel” to
use the included Setup Wi-
zard for fast installation or
“Next” to install manually.
3. Insert the included CD-ROM
into the CD-ROM drive of your
computer. The welcome screen
will automatically appear (if
not, double click the “Setup.
exe” icon).
ENGLISH
6. Click "Finish"
to complete the install
4. Click “Enter” to start the installation. Follow the instructions in the installation
windows to complete the installation.
5. During the installation, the following window may appear. Click “Conti-
nue Anyway” to continue. There is no security threat to your computer.
Use the BWA211 Wireless USB Adapter management software to confi-
gure the device. If it does not appear, select “Start”—“All Programs”
—“BEEWI”—“BWA211”, or click the shortcut on your PC’s desktop.
Note: You can also use the Windows internal wireless application to confi-
gure the device
There are two client utility applications: Station mode (client mode, default
access) and AP mode (server mode).
2.1 Station Mode
2.1.1 Station Mode Topology
In this mode, BWA211 serves
as a client to receive the wireless
signals to access the Internet.
Chapter 2: Client Utility Interface
2.1.2 Status
The Network Status
window shows details
on wireless adapter and
wireless network status,
including SSID, Authen-
tication type, Encryption
Type, IP address, subnet
mask and gateway.
2.1.3 Site Survey The Site Survey is used
to scan the available wi-
reless network around,
showing the wireless
network’s signal strength
and other information
which provides basis
for you to access which
ENGLISH
wireless network.
Connect: select one
entry in the wireless
network list and click
the button to connect the
device with the selected
network.Refresh: rescan
the wireless network
around.
2.1.4 Profile Management
This window saves the
general wireless para-
meters for different pro-
files, which is used to
fast connect the wireless
network you need.
UP/DOWN: To change
the prole’s sequence in
the list.
Connect: To activate
one profile.
New: To create a new profile and configure the site status and security setting.
Modify: To modify one existing profile.
Delete: To delete one existing profile
Site Status: chose infras-
tructure mode to connect
to an internet box.
Security Setting: chose the
security setting used by the
internet box.
ENGLISH
2.1.5 Statistics
Statistics is used to sum-
marize Rx and Tx data
packets, including the
success and error packet
amount.
Clear: click this button to
renew the statistics.
2.1.6 WPS Setting WPS setting is enabled
only on WPS-compliant
devices.
PIN Enter the Pin code
and click the “PIN” to
automatically connect the
wireless adapter with wi-
reless devices around.
PBC Click the “PBC” to
complete auto-check and
connections between wi-
reless adapter and other
wireless device.
Refresh: to update the Pin
code.
Rescan: to rescan the WPS-compliant wireless network around.
Connect: click this button to connect the WPS wireless network.
Disconnect: to disconnect the connected wireless network.
2.2 AP Mode
2.2.1 AP Mode Topology The device also can
serve as an access
point to transmit wire-
less signals and create
wireless network, al-
lowing other wireless
clients to access the
network.
Click the AP Mode icon
to enter the AP Mode
interface.
2.2.2 Basic Setting This window is used to
configure the AP’s basic
para- meters, including
SSID, Wireless Mode and
Channel.
SSID: Wireless network’s
ID name scanned by wire-
less adapter.
Wireless Mode: 802.11b
/ 802.11g / 802.11b/g
mixed.
Channel: 1~11 channels
provided. Restore Default:
to restore the set parame-
ters to default factory de-
fault settings. Apply: to make the changes made take effect.
2.2.3 Security Setting This window is used to confi-
gure the wireless network’s
security authentication, provi-
ding WEP, WPA-PSK, WPA2-
PSK, and WPA-PSK/WPA2-
PSK encryption methods.
WEP：10/26 bits Hex or
5/13 ASCII support.
WPA-PSK：8~32 bits ASCII
support.WPA2-PSK：8~32
bits ASCII support.WPA-PSK/
WPA2-PSK：8~32 bits ASCII
support.
Note:1. Hex characters: 0~9 and A~F characters.
2. ASCII characters: any characters.
ENGLISH
2.2.4 Access Control Access Control is based
on the MAC address to
decide that the specified
client connects to the wi-
reless network, or disables
it to access the wireless
network
Filter Policy:
Disabled: to disable the
filter function.
All Permitted: to permit all
clients in the list to access
the wireless network.
All Blocked: to refuse all
clients in the list to access
the wireless network. MAC Address to input the client’s MAC address to
implement the corresponding filter policy. For example: b0000a8cd702.
Add: to add the entered MAC address into the list.
Delete: to delete one existing MAC address in the list.
Remove All: to delete all clients’ MAC address in the list.
Apply: to make the changes made take effect.
2.2.5 About This window display de-
tails about software ver-
Indice
Lingue:
Altri manuali BeeWi Adattatore
