5
10. Children are not left in their child restraint system unattended.
11. Any luggage or other objects liable to cause injuries in the event of a collision shall
be properly secured.
12. The child restraint must not be used without the cover.
13. The seat cover should not be replaced with any other than the one recommended
by the manufacturer, because the cover constitutes an integral part of the restraint
performance.
14.Do not use any load bearing contact points other than those described in the
instructions and marked in the child restraint.
15.This child restraint can only be used in the car, not for home。
16.DO NOT put objects on the child restraint, keep it away from corrosive material.
17.The Manufacturer will guarantee the quality of the child car seat, but not the
second-hand seat.
Installation methods
1.Put the seat on the car, push the booster cushion firmly against the car seat backrest,
let the child sit on the booster,pull out the car seat belt, thread the car lap belt under the
armrest then across your child’s hips,pull the diagonal belt through your child’s chest,
then pull the lap belt and the diagonal belt together through the other side of the
armrest and buckle up. Tighten the lap belt and diagonal belt . Caution! The car seat
belt is not tangled, twisted or jammed in the car door or other auto-parts. As below
picture:
