Beijer Electronics X2 control Manuale utente

ImageManualX2pro/extremeweb

English

MAEN341,2020-08

Foreword

User’sGuideforImageManualX2pro/extremeweb

Foreword

The information in this document is valid for the latest versions of the panel

images at the time the document was released.

For information and updates, see https://www.beijerelectronics.com.

Order no: MAEN341

The information in this document is subject to change without notice and is provided as available at the

time of printing. Beijer Electronics AB reserves the right to change any information without updating this

publication. Beijer Electronics AB assumes no responsibility for any errors that may appear in this document.

All examples in this document are onlyintended to improve understanding of the functionality and handling

of the equipment. Beijer Electronics AB cannot assume any liability if these examples are used in real

applications.

Inviewofthewider

ange of applications for this software, users must acquire sufﬁcient knowledgethemselves

in order to ensure that it is correctly used in their speciﬁc application. Persons responsible for the application

and the equipment must themselves ensure that each application is in compliance with all relevant

requirements, standards, and legislation in respect to conﬁguration and safety. Beijer Electronics AB will

accept no liability for any damage incurred during the installation or useof equipment mentioned in this

document. Beijer Electronics AB prohibits all modiﬁcation, changes, or conversion of the equipment.

BeijerElectronics, MAEN341

Contents

1 Introduction ............................................................. 4

1.1 SafetyPrecautions ................................................ 4

1.2 Warning,Caution,Information,andTipIcons ............... 4

1.3 References ........................................................ 5

1.4 Open source software notice .................................... 5

2 Boot ...................................................................... 6

3 Navigation ............................................................... 7

4 Conﬁguration ........................................................... 8

4.1 Change admin password ........................................ 9

4.2 General ........................................................... 10

4.3 Display ........................................................... 10

4.4 Network .......................................................... 11

4.5 Diagnostics ....................................................... 11

4.6 Licenses ........................................................... 11

5 ImageUpdate ............................................................ 12

5.1 Updating the Panel Image usingUSB .......................... 12

5.1.1 Imageupdate ....................................................12

5.1.2 Bootloaderupdate ...............................................12

BeijerElectronics, MAEN341

Introduction

1Introduction

1.1 SafetyPrecautions

Both the installer and the owner and/or operator of the operator panel must read

and understand the manual.

1.2 Warning,Caution,Information,and

TipIcons

This publication includes Warning, Caution, and Information where appropriate

to point out safety related or other important information. It also includes Tip

to point out useful hints to the reader. The corresponding symbols should be

interpreted as follows:

Electricalwarningiconindicatesthepresenceofahazardwhichcould

resultinelectricalshock.

Warningiconindicatesthepresenceofahazardwhichcouldresultin

personalinjury.

Cautioniconindicatesimportantinformationorwarningrelatedto

theconceptdiscussedinthetext. Itmightindicatethepresenceof

ahazardwhichcouldresultincorruptionofsoftwareordamageto

equipment/property.

Informationiconalertsthereadertopertinentfactsandconditions.

Tipiconindicatesadviceon,forexample,howtodesignyourprojector

howtouseacertainfunction.

BeijerElectronics, MAEN341 4

Introduction

1.3 References

Name Description

MAEN202 InstallationManualX2

The installation, technical data as well cutout and outline dimensions of the panels

are described in the installation manual for each operator panel. Please refer to the

Installation manual for further information.

Note:

Currentdocumentationandsoftwareupdatescanbefoundon

http://www.beijerelectronics.com

1.4 Opensourcesoftwarenotice

To obtain the source code under GPL, LGPL and other open source licenses that

are contained in this product, please contact [email protected].In

addition to the source code, all referred license terms, warranty disclaimers and

BeijerElectronics, MAEN341 5

Boot

2Boot

1. Apply power to the operator panel.

2. Within 15–20 seconds, the Browser will appear.

If a start address deﬁned in the conﬁguration, it will be loaded automatically.

otherwise you will be directed to the conﬁguration.

The X2 web is pre-conﬁgured from factory with a url to a HTML5 demo page.

BeijerElectronics, MAEN341 6

Navigation

3Navigation

To reach the right click context menu, tap the touch surface and keep it pressed for

at least 1.5 seconds. A drop down menu will show with navigation commands.

The following commands is currently implemented:

•Back

•Forward

•Reload

BeijerElectronics, MAEN341 7

Conﬁguration

4Conﬁguration

If there is no start address is conﬁgured in the panel, the conﬁguration will be

shown after boot.

Perform the following steps to enter the conﬁguration:

1. Apply power to the panel.

2. When the browser appears, swipe down with one ﬁnger from the top of the

screen.

3. If the conﬁguration UI is password protected, you will be prompted for a pin

code.

–Enter pin code. Default PIN code from factory is 1234.

X2 web extreme 15

BeijerElectronics, MAEN341 8

Conﬁguration

X2 web pro 15

4.1 Changeadminpassword

The admin password for the Conﬁg is preconﬁgured in production but can be

changed from a SSH terminal.

using vi. Change the admin_pass valuetothedesiredpasswordusingcharacters

0-9. Save the ﬁle and reboot the device.

BeijerElectronics, MAEN341 9

Conﬁguration

4.2 General

•Model – Model name of the device model.

•Software Version – Current installed software version.

4.3 Display

Tab Description

URL Startpage

Loadpage MakesthebrowsergototheURL.

Brightness Brightnesssettingforthedisplay(scale

0-100).

Screentimeout Settimebeforescreensaveractivates

30sek-10min.

Activate Startthescreensaverimmediately.

BeijerElectronics, MAEN341 10

Altri manuali per X2 control

Indice

Altri manuali Beijer Electronics Schermo tattile

Beijer Electronics

Beijer Electronics EPC TA150 AM Manuale utente

Beijer Electronics

Beijer Electronics X2 control Manuale utente

Beijer Electronics

Beijer Electronics VICPAS EXTER T40 Manuale utente

Beijer Electronics

Beijer Electronics X2 marine 15 Manuale utente

Manuali Schermo tattile popolari di altre marche

Elecro Engineering

Elecro Engineering Poolsmart Plus Istruzioni per l'installazione

Johnson Controls

Johnson Controls IQ4 HUB Manuale utente

Elo TouchSystems

Elo TouchSystems ET2270L Manuale utente

Elo TouchSystems

Elo TouchSystems ET1002L Manuale utente

Elo TouchSystems

Elo TouchSystems 3201L Manuale utente

Duratec

Duratec S15 Manuale utente

Crestron

Crestron TPMC-3SM Manuale utente

Racelogic

Racelogic MFD Touch Manuale utente

J2 580 Guida utente

HAI

HAI OmniTouch 10p Manuale utente

panel

panel PC PSR108-FM Series Manuale utente

Tipro

Tipro FREE+ Manuale utente

Systemline

Systemline Commander Manuale utente

Interactive Technologies

Interactive Technologies Insite Manuale utente

GVision

GVision Legacy Manuale utente

BeiJer

BeiJer T21C-C24 Manuale utente

Advantech

Advantech ITM-5117 Series Manuale utente

Edge

Edge CS Manuale utente