Page 2
Power Supply Code FS230M ................................................................................ 230/240 VAC ±10%
Power demand .......................................................................................................... 1,5 W @230 VAC
Insulation ........................................................................................................................... Class II
Power Supply Code FS024M ........................................................................................... 24 VDC ±10%
Power demand ........................................................................................................... 3,5 W @24 VDC
Power Supply Code FS012M ........................................................................................... 12 VDC ±10%
Power demand ............................................................................................................1,2 W @12 VDC
Acoustic Power ........................................................................................................... 118 dB 100 cm
Sound frequency ........................................................................................................................ 1 Hz
Timer ................................................................................................. 3 mins with switch 1 in ON position
Audio disabling .............................................................................................. with switch 2 in ON position
Cable diameter ..................................................................................................................... 1 mm2 CSA
Functioning temperature ....................................................................................................... -10 + 70°C
Functioning humidity ......................................................................................... 0÷90% RH non condensed
External degree of protection ......................................................................................................... IP54
Dimensions ........................................................................................................................ 90*135*45
Electromagnetic compatibility ............................................................................ EN 50270 - EN 61010-1
ATTENTION!! Read the following instructions carefully before installing and keep this
booklet in a safe place for future reference.
In order to connect to the mains power, carefully follow the instructions and ensure the
voltage is correct.
CHECK the integrity of the siren after having removed it from the box.
Check that the data written on the box correspond to siren voltage used.
When doing the electrical connections, follow the drawing closely.
Any use of the siren for purposes otherthan the intended one is considered improper, and
as a result of which BEINAT S.r.l. therefore disclaims any responsibility for possible
damages caused to people, animals or objects.
Never clean the device with chemical products. If necessary, after having disconnected the power, wash with a moist
cloth.
Always entrust installation and maintenance of the devices to qualified and/or authorised technicians who, in cases
of failure, can guarantee use of original spare parts.
Do not allow it to become wet.
The device can be seriously damaged as it is not waterproof either when immersed in water or exposed to high levels
of humidity.
Do not drop it.
Heavy knocks or falls during transportation or installation can damage the appliance.
Avoid abrupttemperature fluctuations.
Sudden temperature variations can cause condensation and the device could work poorly.
Cleaning
Never clean the device with chemical products. If necessary, wash with a moist cloth.
90 mm
135mm
Opening of the Cover.
With the help of a screwdriver to turn
counterclockwise for a quarter of turn
Close of the Cover.
With the help of a screwdriver to turn
counterclockwise for a quarter of turn
45 mm
Technical Specifications
Precautions
