BeingHD FIX-MANAGER-400-4K60 Manuale utente

Version: V2.0.1

4K60 4x4 HDMI Matrix Switcher

User Manual

1. Introduction

This is a 4K60 4x4 HDMI matrix switcher which supports 4 HDMI2.0 inputs and 4 HDMI2.0

outputs with COAX audio de-embedded function. The resolution can up to 4K@60Hz, and

other resolutions which are down than this. It also can support 3D, HDR, HDCP compliant. The

control ways can be remote control, front buttons and WEB GUI(IP) control. It has been

popularly used in the control center, medical and so on applications.

2. Features

Supports HDMI20, HDCP2.2 compliant, up to 4Kx2K@60 Hz 4: 4: 4

Supports HDR

Supports real-time monitoring with the LCD screen

Supports remote control, RS232 and TCP/IP

Supports powerful EDID management

Supports USB firmware upgrade

Fixed chassis with 19’’ mountable design

3. Specification

4. Panels

①Power Switch

Name

HDMI2.0 4K60 4x4 HDMI matrix switcher

Input

4*HDMI, 1*RS232,1*RJ45

Output

4*HDMI, 1*COAX

Protocol

Supports HDMI2.0, HDCP2.2, HDR and EDID management

Color Space

Supports RGB444, YUV444, YUV422. And x.v.Color standard

Resolution

640x480---1920x1200@60Hz(VESA), 480i---4K60Hz(HDTV)

Bandwidth

18Gbps

Control

Front buttons, remote, RS232, TCP/IP

Dimension

482x288x44(mm)

Weight

2kg

Power

AC:110V-240V 50/60Hz DC:12V 3A

Working Temp

-10℃- 50℃

Storage Temp

-25℃- 55℃

②LCD Screen for real-time info monitoring

③Power indicator

④INPUT selection buttons

⑤CONTROL

ALL: Switch to all button

EDID: EDID selection/switching

SAVE: User mode save

ENTER: Confirm button

RECALL: User mode recall button

⑥IR receiver

⑦OUTPUT selection buttons

⑧HDMI input ports

⑨HDMI outputs ports

⑩COAX audio de-embedded port

⑪Upgrade port

⑫IR port

⑬RS232 control port

⑭RJ45 IP control

⑮12V power adapter connect port

5. Connection diagram

Note: the above image is only for this user manual, please refer to the real application or the equipment.

6. Packing details

4x4 HDMI matrix Switcher

1 Unit

Power adapter

1 unit

Remote control

1 Pcs

7. Operation Steps

7.1 Front panel buttons

7.1.1 Switch Operation

A. Switch one input to one output:

Steps: “input”+“output”+“ENTER”

Eg: Switch input 1 to the output 2

B. Switch one input multiple outputs:

Steps: “input”+“output”+“output”+…+“ENTER”

Eg: Switch input 2 to output 2, 4

C. Switch one input to all the outputs

Steps: “input”+“ALL”+“ENTER”

Eg: Switch input 1 to all the outputs

Note: If switch success, the light will flash for 3 times;

7.1.2 EDID Management

A. EDID learning for the outputs

Steps: “EDID”，“INPUTS”+“UP/DOWN”+“ENTER”

Eg: Input 2 learn the EDID from output 4

B. All inputs are learning the EDID from one output

Steps: “EDID”,“ALL”+“UP/DOWN”+“ENTER”

Eg: All inputs learning EDID from output 4

7.1.3 Use Built in EDID

Press“UP/DOWN”button to select and use the internal EDID

Item number

Name

EDID Data function

1~4

Inport1~4

Input port Edid

5~9

USER1~5

Saved User Edid Data,user can save data to here.

10~13

OUT1~4

Read EDID from HDMI out port(HDMI displayer)

HD8Stereo

1080P 2CH

HD8DolbyDTS

1080P 2CH DTS/Dolby

HD8Lossless

1080P 2CH PCM

HD12Stereo3D

1080P 3D 12Bits

HD12DolbyDTS3D

1080P 3D 12Bits DTS/Dolby

HD12Lossless3D

1080P 3D 12Bits PCM

4K30P8Stereo

4K30 2CH

4K30P8Lossless

4K30 2CH PCM

4K60420StereoHDR

4K30 2CH HDR

4K60444Stereo

4K60 4:4:4 2CH

7.2 Look up

7.2.1 Look up the status

Press and hold“ENTER”for 5s, it will access to the look up menu, then press “UP/DOWN”

button to check

Function Items

Example

Description

Switche Status

IN 1 2 3 4

OUT 1 2 3 4

Shows the correspondence

between the 4 inputs and 4

outputs.

Check the connection

status of inputs

IN 1 2 3 4

CON Y Y Y N

Y means the corresponding port

is connected with input device, N

means not.

Check Input have

signal

IN 1 2 3 4

SGN Y Y Y N

Y means the corresponding port

is have signal with input device,

N means not.

Check Input hae HDCP

IN 1 2 3 4

HDCP Y Y Y N

Y means the input signal is with

HDCP, N means not.

Check output have

connection

OUT 1 2 3 4

CON Y Y Y N

Y means the corresponding port

is connected with output device,

N means not.

Check output have

signal

OUT 1 2 3 4

SGN Y Y Y N

Y means the corresponding port

is have signal with output device,

N means not.

Check output have

HDCP

OUT 1 2 3 4

HDCP Y Y Y N

Y means the output signal is with

HDCP, N means not.

Check the output

resolution

RESOLUTION

OUT 1 0000*0000

Press OUTPUT Keys direction

button to check all the 4 output

resolutions.

IP Address

IP ADDRESS

192.168.1.121

Machine IP address

7.2.2 Remote Control

7.2.3 RS232 control

Use the straight connection RS232 cable(USB-RS232 cable can be used directly)

Baud rate: 115200

Data Bit: 8

Stop bit: 1

Parity Bit: None

RS232 connection, pin definition:

Power: Press to enter into sleep mode

Input: valid range are from 1~4

Output: valid range are from 1~4

PTP: Switch to one to one, 1->1，2->2，3->3，4->4

Enter: Confirm button

RS232 Control commands

Command

Function

Feedback Example

Switch

SW [x] [y] [y] [y]

x: Inport number

y: outport number

SW 1 1 2 3 4: switch input 1 to output 1,2,3,4.

Return: SWS 1 1 1 1

SW 2 2: switch input 2 to output 2

Return: SWS 1 2 1 1

Get Switcher

GetSW

Return :SWS 1 1 1 1

Get FW

version

GetMCUFWVer

Return: MCUVer 01.01.00

Select Edid

SetEDID [x] [y]

x: Inport number

y: Edid selected, reference to Table1: Item

number value.

Eg. SetEdid 1 10 ：Set Outport1 Edid to Inport 1,

Set Edid

Data

SetEDIDData [x] [y]

x: Edid select: Refet table1 item number

The Value is 1~9,

y: Edid Data

Eg.SetEDIDData 1 00 FF FF FF FF FF FF....

Get Edid

Data

GetEDIDData x

x: Edid select: Refet table1 item number

The Value is 1~9,

Eg. GetEDIDData 1

Return: EDIDData 1 00 ff ff ff ff ff ff 00....

Set Output

HDCP

SetOutPortHDCP [x] [y]

x: output port

y: 0 is Off 1: Is On 2:is following input

Command

Function

Feedback Example

Get Output

HDCP

Setting

GetOutPortHDCP

Return: OutPortHDCPS 2 2 2 2

Return four out port HDCP status

Get HDCP

Status

GetInPortHDCPS

InPortHDCPS 0 0 0 0

0: no HDCP

1: is HDCP 1.4

2: is HDCP 2.2

Set logo

SetServiceType

Set LCD line 1 display content

Eg. SetServiceType HDMI4X4

Set Module

SetServiceNum

Set LCD line 2 display content

Eg. SetServiceNum H2M44

Set IP

SetIP x.x.x.x

Set IP address

Eg. SetIP 192.168.1.121

Return: IP 192.168.1.121

This command is avalid for static ip mode

And need powr on again

Get IP

GetIP

Return: IP 192.168.1.121

Set IP mask

SetIPMask x.x.x.x

Eg. SetIPMask 255.255.255.0

Return: IPMask 255.255.255.0

Scence Save

ScenceSave x

Save current switcher to scence

x: 0~9

Scence call

ScenceCall x

Recall the scence saving

X: 0~9

Power on

PWRON

Pown on when in power saving

Power off

PowerOff

Eneter Power saving

Lock keypad

SetKeyLock x

X: 0 set keypad unlock

1 set keypad lock

Keypad

status

GetKeyLock

Return : KeyLockStatus 0

Reset

ResetMCUModule

Reset MCU to factory setting

7.3 WEB Control

Type the IP address 192.168.1.215 into a browser, and it will show the log in interface:

The default password for Administrator is admin, and the password for user is 1234566.

After log in, it will show below interface for the input and output switching:

Users Setting:

Name setting:

HDCP and EDID Management:

Indice

Altri manuali BeingHD Commutatore a matrice

BeingHD

BeingHD TOUCH MANAGER Series Manuale utente

BeingHD

BeingHD E Series Manuale utente

Manuali Commutatore a matrice popolari di altre marche

Broadcast Tools

Broadcast Tools SS 8.2 Manuale utente

Altimium

Altimium MATF32 Manuale utente

ALFAtron

ALFAtron ALF-MUK44N Manuale utente

Monoprice

Monoprice Blackbird 15377 Manuale utente

Kramer

Kramer XL 3216VS Manuale utente

PTN

PTN FMX12 Manuale utente

CYP

CYP nT15GX01 Manuale utente

Kramer

Kramer VP-2x2 Manuale utente

Kramer

Kramer Sierra Video 6432V5xl Manuale utente

TESmart

TESmart HMA0402A40 Manuale utente

Octava

Octava HD4XSTPMX Manuale utente

Intelix

Intelix FLX-88 Istruzioni operative

Kramer

Kramer LASSEN XL 3232S Manuale utente

Roland

Roland XS-1HD Manuale utente

Kramer

Kramer VS-66HDCPxl Manuale utente

Atlona

Atlona AT-HDMI-22M Manuale utente

Link

Link HD8X8 Manuale utente

AMX

AMX AVS-OP-2020-117 Istruzioni e ricette