Beko METPOINT OCV Guida utente

EN - English

Instructions for installation and operation

METPOINT®OCV

DATA-LOG

10-044

mdi - Manufacturers Distributor, Inc Phone: (727) 835 - 0670 | Fax: (813) 571 – 0422 www.BekoSales.com | [email protected]

Dear Customer,

Thank you very much for having chosen METPOINT®OCV DATA LOG software. Please read this

installation and operating manual carefully before installing and using the METPOINT®OCV DATA

LOG and follow our directions. Proper operation of the METPOINT®OCV DATA LOG is

guaranteed only if the instructions and directions specified are strictly observed.

mdi - Manufacturers Distributor, Inc Phone: (727) 835 - 0670 | Fax: (813) 571 – 0422 www.BekoSales.com | [email protected]

1 Contents

1Contents .................................................................................................................................................3

2General information ................................................................................................................................4

3Scope of application and proper use ......................................................................................................4

4System and function description.............................................................................................................5

5System requirements..............................................................................................................................5

6Connecting the network / notebook to METPOINT®OCV......................................................................6

7Installing and setting METPOINT®OCV DATA LOG .............................................................................7

7.1 "Settings" menu ......................................................................................................................................7

7.2 "Network" selection.................................................................................................................................8

7.3 Connection via DHCP.............................................................................................................................8

7.4 Manual network connection....................................................................................................................9

7.5 Establishing a direct connection to a notebook / PC ............................................................................10

7.6 Manual connection to a notebook / PC.................................................................................................11

8The METPOINT®OCV DATA LOG program .......................................................................................17

8.1 Installation and start of METPOINT® OCV DATA LOG .......................................................................17

8.2 Start screen ..........................................................................................................................................18

8.2.1 Display of connected devices ...............................................................................................................18

8.2.2 Language selection ..............................................................................................................................19

8.3 The LIVE function .................................................................................................................................20

8.3.1 Data diagram adaptation ......................................................................................................................22

8.4 The SCREENSHOT function................................................................................................................24

8.5 The FIRMWARE UPDATE function .....................................................................................................25

8.6 The IMPORT + VIEWER function ........................................................................................................26

8.6.1 Selection of data...................................................................................................................................27

8.6.2 The AUTOMATIC IMPORT function ....................................................................................................29

8.6.3 The SINGLE FILE IMPORT function....................................................................................................33

8.6.4 The MULTIPLE FILE IMPORT function ...............................................................................................35

8.7 Data export in EXCEL ..........................................................................................................................37

mdi - Manufacturers Distributor, Inc Phone: (727) 835 - 0670 | Fax: (813) 571 – 0422 www.BekoSales.com | [email protected]

2 General information

Before reading the operating manual check whether you have the right manual at hand.

The operating

manual must be accessibly available at all times at the site where the

software is being used.

To ensure a secure transfer of data, the software must be installed and used solely in

accordance with the specifications in the operating manual.

Disregarding the installation and operating manual results in risk to persons, plant and

equipment.

3 Scope of application and proper use

The METPOINT®OCV DATA LOG software is used for displaying and storing the measured

values collected using METPOINT®OCV. Any use in excess of this is considered as unintended.

The manufacturer is not liable for the consequences of improper use. The operator is solely

responsible for any risk that might result.

mdi - Manufacturers Distributor, Inc Phone: (727) 835 - 0670 | Fax: (813) 571 – 0422 www.BekoSales.com | [email protected]

4 System and function description

The METPOINT®OCV DATA LOG software is used for displaying, remotely analysing and storing

the measured values collected using METPOINT®OCV.

Displaying and storing the measured values for residual oil content ascertained using METPOINT®

OCV can be done on a directly connected notebook/PC and on a notebook/PC connected via the

web.

As a result, the measurement can be tracked on the notebook/PC.

Every measured value from the current collection of data can be read. This also makes it possible

to monitor the measured values over an extended period of time.

In addition, the program provides the means for updating the measurement device software and

makes establishing an FTP connection to the device easier.

5 System requirements

Network: .NET Framework 4 (if not present, is automatically installed

before the program)

Storage space for network 280 MB

Supported operating systems Microsoft Windows XP

Microsoft Windows Vista

Microsoft Windows 7

Minimum hardware Suitable for the particular operating system used

Storage space for software: 25 MB

Interface: Ethernet interface

mdi - Manufacturers Distributor, Inc Phone: (727) 835 - 0670 | Fax: (813) 571 – 0422 www.BekoSales.com | [email protected]

6 Connecting the network / notebook to METPOINT®OCV

Connect the interface for your network / notebook to the METPOINT®OCV (1) Ethernet interface

intended for it using a corresponding network cable.

It should be noted that the connection from the device to the notebook is made using a

crossover cable. The connection to a network is made with a simple patch cable.

mdi - Manufacturers Distributor, Inc Phone: (727) 835 - 0670 | Fax: (813) 571 – 0422 www.BekoSales.com | [email protected]

7 Installing and setting METPOINT®OCV DATA LOG

This chapter describes the connections and settings that must be made for the METPOINT®OCV

DATA LOG software to operate properly.

NOTE!

Administrator rights are mandatory for installing the METPOINT®OCV DATA LOG

software. Please make sure that you are provided with the appropriate permissions.

Please call on the assistance of appropriately trained and authorised technical staff.

7.1 "Settings" menu

The settings that are required for connecting METPOINT®OCV into an in-house network or for

connecting directly to a PC or notebook are made in this menu.

As a rule, two options are available here:

•automatic connection by DHCP

•manual configuration

Note to the network administrator

Communication via a network between METPOINT®OCV and a PC works with the

METPOINT®OCV DATA LOG software only if both are in the same subnet. You can

find out in the manual for your router whether and how the forwarding function is

executed in your router.

Requisite firewall settings:

HTTP: Enable port 1111 (in- and outbound)

in addition: Enable port 5000 (TCP) for device update

FTP connection: Port 21 (TCP) (outbound for passive only)

Port 21 (TCP) (in- and outbound for active)

It is also possible to manually establish an FTP connection to a device in another

subnet. Please contact your network administrator.

"metpoint" for the user name and "logfiles" for the password must be specified as the

mdi - Manufacturers Distributor, Inc Phone: (727) 835 - 0670 | Fax: (813) 571 – 0422 www.BekoSales.com | [email protected]

7.2 "Network" selection

Select the desired method in the menu sub-item NETWORK:

•Automatic IP address assignment via DHCP

•Manual IP address assignment.

To use this selection, go to main menu SETTINGS and then select NETWORK.

7.3 Connection via DHCP

If connection via DHCP is selected, no additional settings are required. This is based on the

prerequisite that the connected network has a DHCP server.

mdi - Manufacturers Distributor, Inc Phone: (727) 835 - 0670 | Fax: (813) 571 – 0422 www.BekoSales.com | [email protected]

7.4 Manual network connection

Here, the network connection data must be entered manually. The following entries are required:

•IP address

•Net mask

•Gateway address

It must be ensured that different IP addresses are assigned to all devices in the

network. However, the network portion of the IP address must be identical for all

devices that communicate with each other within a network.

NOTE!

Please call on the assistance of appropriately trained and authorized IT specialists.

mdi - Manufacturers Distributor, Inc Phone: (727) 835 - 0670 | Fax: (813) 571 – 0422 www.BekoSales.com | [email protected]

7.5 Establishing a direct connection to a notebook / PC

The connection from the device to the notebook is established using a crossover cable.

A direct connection to a notebook can also be established by means of manual configuration or

automatic address assignment via DHCP (Auto-IP).

mdi - Manufacturers Distributor, Inc Phone: (727) 835 - 0670 | Fax: (813) 571 – 0422 www.BekoSales.com | [email protected]

Altri manuali per METPOINT OCV

Indice

Altri manuali Beko Registratore di dati

Beko

Beko METPOINT BDL portable Guida utente

Manuali Registratore di dati popolari di altre marche

TESTO

TESTO 176 Manuale utente

HT Italia

HT Italia XL421 Manuale utente

HBM

HBM SOMAT XR CX22B-R Manuale utente

Agtrix

Agtrix 380i Manuale utente

Hobo

Hobo H8 Pro Manuale utente

Beijing ART Tech

Beijing ART Tech PCI2320 Manuale utente

Athena

Athena GET SL1 Manuale utente

Motec Systems

Motec Systems C185 Manuale utente

Beijing ART Tech

Beijing ART Tech USB2832 Manuale utente

Rotronic

Rotronic HygroLog HL20 Manuale utente

MRC

MRC DW-6092 Manuale utente

Racelogic

Racelogic VBOX LapTimer Manuale utente

Edu-Logger

Edu-Logger 900-240 Manuale utente

Elma

Elma DT173 Manuale utente

MadgeTech

MadgeTech PRTemp140 Scheda tecnica

Comet

Comet U0121M Manuale utente

pico Technology

pico Technology PT-104 Manuale utente

Soil Instruments

Soil Instruments GTecLink Manuale utente