Beko DDT25400B Manuale utente
www.beko.com.tr
DDT25400B
DDT25400GB
DDT25400W
DDT25400X
DDT25400XP
DDT28410X
DDT28430X
DDT28430XP
DDT29430X
DIT25400
DIT28430
DIT29430
DUT25400B
DUT25400W
DUT25400X
DUT28430W
DUT28430X
USA
Document Number :
Dishwasher
Installation Manual
15 0625 0100_AA_USA/ 02-03-16.(10:36)
INTRODUCTION 1
1. IMPORTANT SAFETY INSTRUCTIONS 1
1.1 INSPECT THE DISHWASHER 2
2. TOOLS WHICH MAY BE NEEDED 3
3. MATERIALS WHICH MAY BE NEEDED 3
4. MATERIALS SUPPLIED 4
4.1 PARTS SUPPLIED 4
4.2 MANUAL BAG 4
4.3 DISHWASHER PARTS BAG 1 4
4.4 DISHWASHER PARTS BAG 2 4
4.5 PARTS ATTACHED TO THE REAR OF THE DISHWASHER 4
5. DISHWASHER SPECIFICATIONS 5
5.1 TECHNICAL FEATURES 5
6. ENCLOSURE PREPARATION 6
6.1 ELECTRICAL PREPARATION 6
6.2 PREPARATION FOR INSTALLING MOUNTING BRACKETS 6
6.3 ADJUSTING HEIGHT 7
6.4 INSTALLING THE SIDE TRIM STRIPS 7
6.5 PREPARING THE WATER CONNECTION (A) 8
6.6 DRAIN PREPARATION 9
6.7 STEAM PROTECTION FOIL 10
7. PLACEMENT OF DISHWASHER INTO THE OPENING 11
7.1 DRAIN HOSE CONNECTION, WATER SUPPLY & ELECTRICAL CONNECTIONS 11
7.2 READJUSTING FOOT LEVELS 16
7.3 ADJUSTING THE MOVABLE TOE KICK 16
7.4 INSTALLING THE OUTER DOOR 17
8. INSTALLER CHECKLIST 23
9. FINAL INSTRUCTIONS 23
10. SELF HELP HINTS: 23
To prevent accidents, which could cause serious injury or death, as well
as machine damage read these instructions before installation and / or
use.
1USA
INTRODUCTION
Please read ths nstallaton manual
and partcularly the safety nstructons
completely and carefully. They wll save you
tme and effort and help to ensure optmum
dshwasher performance.
Be sure to observe all lsted warnngs and
cautons. Look partcularly for the cons wth
exclamaton marks nsde. The nformaton
con also wll provde mportant references.
WARNING:
Indcates a potentally hazardous stuaton
whch, f not avoded, could result n death
or serous njury.
CAUTION:
Indcates a potentally hazardous stuaton
whch, f not avoded, may result n njury.
It may also be used to alert aganst unsafe
practces.
Notice:
Indcates a potentally hazardous stuaton
whch, f not avoded, may result n damage
to the dshwasher, the table-ware, the
equpment or the envronment.
1. IMPORTANT SAFETY
INSTRUCTIONS
In addton to these nstructons, the
dshwasher shall be nstalled:
•In accordance wth all local codes or, n
absence of a local code,
•In the Unted States, wth the Natonal
Electrc Code,
•In Canada, wth the Canadan Electrc
Code C22.1-latest edton/Provncal
and Muncpal codes and/or local codes.
NOTICE :
Read these nstallaton nstructons
completely before nstallng and follow
them carefully. Save these nstallaton
nstructons and pass them on to any
future user.
WARNING
When installing the dishwasher,
follow basic precautions, including
the following:
•The dshwasher could only be
converted from cord-connected
to permanently connected by an
authorzed servce representatve.
(If needed contact your dealer to
schedule an authorzed servce agent
for converson wth an approprate
converson kt)
•Installaton and repar should be
performed by a qualfed nstaller.
Work by unqualfed persons could be
dangerous and may vod the warranty.
NOTICE :
The dshwasher should be nstalled by an
nsured lcensed plumber, contractor or
traned nstaller. Installaton performed
by persons other than ths could result n
mproper nstallaton and property damage.
•Do not operate the applance f
damaged, malfunctonng, partally
dsassembled or f t has mssng or
broken parts.
•Also follow the safety nstructons of
the user manual.
•To reduce the rsk of electrc shock,
fre, or njury to persons, the nstaller
must ensure that the dshwasher s
completely enclosed at the tme of
nstallaton.
•Only connect the dshwasher to the
power supply when all nstallaton and
plumbng work s complete.
2USA
•If the dshwasher s nstalled n a
locaton that experences freezng
temperatures (e.g. n a vacaton home,
cabn, etc.), you must dran all the
water from the dshwasher’s nteror.
Water system ruptures that occur as
a result of freezng are not covered by
warranty.
•Dshwasher must be secured to
adjacent cabnetry usng the brackets
provded. Falure to do ths may cause
damage to property or bodly njury.
•Connect to a properly rated, protected
and szed power supply crcut to avod
electrcal overload. The dshwasher
s desgned for an electrcal supply
of 120 V (volts), 60 Hz (hertz), AC,
connected to a dshwasher-dedcated,
properly grounded electrcal crcut
wth a fuse or breakers rated for 15
amperes. Electrcal supply conductors
shall be a mnmum of # 16 AWG
copper wre rated at 75 °C (167 °F) or
hgher. These requrements must be
met to prevent njury and machne
damage. Consult a qualfed electrcan
f n doubt.
•Do not use any extenson cord or
portable outlet devce to connect the
dshwasher to a power supply.
•Ensure that any plastc wrappngs,
bags, small peces etc. are dsposed
of safely and kept out of the reach of
chldren. Danger of suffocaton!
•Remove the door to the washng
compartment when removng an old
dshwasher from servce or dscardng
t. Ensure that the applance presents
no danger to chldren whle beng
stored for dsposal.
•Old applances may contan materals
that can be recycled. Please contact
your local recyclng authorty about
the possblty of recyclng these
materals.
NOTICE :
•The dshwasher dran hose must be
nstalled wth a dran loop at least
28” (710mm) off the cabnet floor;
otherwse the dshwasher may not
dran properly.
•Ths dshwasher s ntended for
resdental use only, and should not be
used n commercal establshments.
•New nstallaton - If the dshwasher s
a new nstallaton, most of the work
must be done before the dshwasher
s moved nto place.
•Replacement - If the dshwasher s
replacng another dshwasher, check
the exstng dshwasher connectons
for compatblty wth the new
dshwasher, and replace parts as
necessary.
1.1 INSPECT THE DISHWASHER
After unpackng the dshwasher and pror
to nstallaton, thoroughly nspect the
dshwasher for possble freght or cosmetc
damage. Report any damage mmedately.
NOTICE :
•Cosmetc defects must be reported
wthn 10 days of nstallaton.
•Do not dscard any bags or tems that
come wth the orgnal package untl
after the entre nstallaton has been
completed.
3USA
2. TOOLS WHICH MAY BE NEEDED
3. MATERIALS WHICH MAY BE NEEDED
(Addtonal materals may be requred to comply wth local codes)
Hot Water Supply Lne - Mnmum 3/8” O.D. copper tubng or metal braded
dshwasher supply lne.
90° elbow wth 3/8” N.P.T. male threads on one leg, and szed to ft your
water supply lne (copper tubng/compresson fttng, or braded hose) on
the other leg.
UL lsted condut connector or stran relef.
Teflon tape or other ppe thread compound to seal plumbng connectons.
Shut-off valve and fttngs approprate for hot water supply lne (copper
tubng/compresson fttng, or braded hose).
Slcone
Glue
4USA
4. MATERIALS SUPPLIED
4.1 PARTS SUPPLIED
Parts for your dshwasher wll
come n several plastc bags.
Check your parts bags shown
to make sure you have all the
parts as lsted to the left.
4.2 MANUAL BAG
The dshwasher comes wth a
manual bag contanng:
•User manual,
•Installation manual
4.3 DISHWASHER
PARTS BAG 1
Ths dshwasher bag comes
wth the followng parts:
a.
Sde Trm Strps (Left)
b.
Sde Trm Strps (Rght)
c.
Adjustng Wrench
d.
Screws Ø 1/8” x 5/8” (Ø 3.5
mm x 14 mm)
e.
Mountng Bracket Left
f.
Mountng Bracket Rght
g.
Sprng Clamp
h.
Screw Clamp
j.
Rubber Connector
k.
Toe Kck Bracket - Left
l.
Toe Kck Bracket – Rght
m.
Edge Protector
n.
Clps
o.
Toe Kck (toe kck wthout
slots)
p.
Toe Kck (MODEL
DEPENDING)
r.
Screws Ø 1/8” x 3/8” (Ø 3.9
mm x 9 mm)
s.
Plastc Caps
t.
Screws Ø 3/16” x 1/4” (Ø
4mm x 6mm)
z.
Steam Protecton Fol
4.4 DISHWASHER
PARTS BAG 2
(MODEL DEPENDING)
In addton to the manual bag
and the dshwasher parts bag
(dshwasher models whch
can accept a wooden ktchen
door) also come wth a door
panel nstallaton kt whch
contans:
v.
Screws Ø 1/8” x 5/8” (Ø
3.5mm x 14mm)
y.
Screws Ø 3/16” x 13/4” (Ø
4mm x 43mm)
4.5 PARTS
ATTACHED TO
THE REAR OF THE
DISHWASHER
a.
Sde Trm Strps (Left)
b.
Sde Trm Strps (Rght)
o.
Toe Kck (toe kck wthout
slots)
p.
Toe Kck (MODEL
DEPENDING)
5USA
5. DISHWASHER SPECIFICATIONS
5.1 TECHNICAL FEATURES
Load capacity
14 place settngs
Permissible water
pressure
4.35 - 145 ps (0.3 - 10 bars)
Electrical connection
120 V (volts), 12 A (amps), 60Hz (hertz)
Total power
1400 W (watts)
Heater power
1240 W (watts)
NOTİCE :
Because we contnually strve to mprove our products, we may change our specfcatons
and desgn wthout pror notce.
Ths devce corresponds to the followng drectves:
UL 749 Household Dshwasher drectve.
6USA
6. ENCLOSURE PREPARATION
6.1 ELECTRICAL PREPARATION
WARNING
The dishwasher is designed for an electrical supply of 120 V, 60 Hz, AC,
connected to a dishwasher-dedicated, properly grounded electrical circuit
with a fuse or breaker rated for 15 amperes.
6.2 PREPARATION FOR
INSTALLING MOUNTING
BRACKETS
WARNING
Dishwasher must be secured
to adjacent cabinetry using the
mounting brackets provided.
Failure to do this may cause
damage to property or bodily
injury.
Place the two mountng brackets nto the
top corners of the dshwasher.
Fx the mountng brackets (
A
) to the top
corners of the dshwasher, wth the screws
suppled.
Bend sdes of mountng brackets (
B
) n
order to fx from sdes (f necessary).
7USA
6.3 ADJUSTING HEIGHT
If the heght of the enclosure s 337/8” to 357/8”
(861 mm - 911mm) adjust supports as shown n
the fgure.
Suppled (
4
)
Adjust the front foot level wth the adjustng
wrench to balance and rase the dshwasher to
the enclosure heght.
Adjust the rear foot level wth a screwdrver to
balance and rase the dshwasher to the enclosure
heght.
NOTİCE :
•Make sure the dishwasher is plumb and notice
dishwasher can be placed with a small clearance
under the counter top.
•Turning the screwdriver in the direction of the
black arrows will bring the dishwasher back feet
up.
•Turning the screwdriver in the direction of the
white arrows will take the dishwasher rear feet
down.
6.4 INSTALLING THE SIDE TRIM
STRIPS
1. Remove the adhesve tape (Fgure
A
).
Place the trm strps on the front edge of the sde
walls (Fgure
B
).
NOTİCE :
•Make sure you use the correct trim strip since
there is a left and right side strip. The flexible
material should be facing forward (Figure
B
).
8USA
6.5 PREPARING THE WATER CONNECTION (A)
Install an easly accessble shut-off valve (not suppled) n the water supply lne. All solder
connectons must be made before the water lne s connected to the dshwasher’s water
nlet valve. Water can also be suppled to the dshwasher by usng a flexble braded hose
lne.
Check wth your plumbng supply sources for the proper hose and 90° elbow and necessary
fttngs for the water supply lne. Ths materal s not suppled, and must be purchased
separately.
WARNING
Installation should be performed by a qualified installer. Work by unqualified
persons could be dangerous and may void the warranty.
If the dishwasher is installed in a location that experiences freezing
temperatures (e.g. in a vacation home, cabin etc.), you must drain all the
water from the dishwasher’s interior. Water system ruptures that occur as a
result of freezing are not covered by warranty.
A
B
6.5.1 INSTALLING THE 90° ELBOW
FITTING (B)
CAUTION
Do not over tighten the 90° elbow. Doing
so may damage the water inlet valve and
cause a water leak.
If the water supply lne s to be copper tubng,
make certan that the elbow has a compresson
fttng. Apply Teflon tape or other ppe sealant
when requred. Orent the water supply connecton
downwards as shown n the fgure so the water
lne can be easly pulled underneath or on the sde
of the dshwasher.
Questo manuale è adatto per i seguenti modelli
16
Indice
Altri manuali Beko Lavastoviglie
Beko
Beko BDUN26645W Manuale utente
Beko
Beko DFN05314X Manuale utente
Beko
Beko DIN36422 Manuale utente
Beko
Beko DFS05010 Manuale utente
Beko
Beko D2731 Manuale utente
Beko
Beko DIN29330 Manuale utente
Beko
Beko BDF1630X Manuale utente
Beko
Beko DFS26024X Manuale utente
Beko
Beko DFN29420W Manuale utente
Beko
Beko DIN28Q20 Manuale utente
Beko
Beko DFN28R31Series Manuale utente
Beko
Beko DFN38530DX Manuale utente
Beko
Beko DWD4310 Manuale utente
Beko
Beko DIS25841 Manuale utente
Beko
Beko DSN 2521 Manuale utente
Beko
Beko DIS16010 Manuale utente
Beko
Beko BDIN16421 Manuale utente
Beko
Beko DFN05R10W Manuale utente
Beko
Beko DIN48430 Manuale utente
Beko
Beko DFN05R10B Manuale utente
