Beko DSN04N22X Manuale utente
Operating the product
Read “Safety Instructions” section first!
Quick Guide
Rinse Aid indicator
Half Load function
Salt indicator
1 2 3
5678
4
1-
2-
3-
4-
5-
6-
7-
8-
On/Off Control light
Handle
On/Off/Programme Selection key
Start/Pause/Cancel key
Programme Follow-up lights
Auxiliary functions
Washing programmes of your dishwasher
are designed to obtain the best cleaning
effect, considering the type of the soiling,
soiling degree and properties of the dishes
to be washed.
Auxiliary functions are provided in order to
enable you to save time, water and energy
and to perform a more comfortable washing
with conditions specific to you.
Auxiliary functions may cause changes
in the programme duration.
1234
Eco * Intensive Clean&Shine Mini (#)
50 ºC 70 ºC 65 ºC 35 ºC
Suitable for washing dishes
with normal amount of soil.
It is the most efficient
program in terms of
combined power and water
consumption. This is used
for assessing the
compliance with EU's eco-
design directive.
Suitable for heavily soiled
dishes, pots and pans.
Daily washing programme
for normally soiled dishes.
Suitable for lightly soiled
daily dishes that are
scraped or pre-cleaned.
Medium High Medium Low
+++ -
++++
+++ -
205 120 120 30
12,9 17,6 16,2 11,8
0,937 1,65 1,38 0,8
Loading Capacity: 13
Programme Data and Average Consumption Values Table
The consumption values shown in the table were determined under standard conditions. Differences may therefore occur under practical conditions. * Reference programme for testing
institutes. The tests in accordance with EN 50242/60436 must be carried out with a full water softener salt dispenser and a full rinse aid reservoir, and using the test programme. The
values given for programmes other than Eco 50°C programme are indicative only. (#) Additional functions might cause changes in programme durations.
Programme number
Programme name
Cleaning temperature
Degree of Soiling
Energy (kWh)
Prewash
Wash
Dry
Duration (min)
Water (I)
#
Sensitivity: Public
Quick Guide
Adjusting the water softening system
•Unpack the test strip.
•Open the tap and let the water flow for approx. 1
minute.
•Dip in the test strip into the water for 1 second.
•Take out the strip from the water and shake it.
•Wait for 1 minute.
•Make the necessary adjustment according to the test
strip.
Level 0
Level 1
Level 2
Level 3
Level 4
Level 5
After detecting the water hardness:
1. When the Programme Selection knob is in Off position, press and hold the Start/Pause/
Cancel key and turn the Programme Selection knob clockwise by one level within 5
seconds. Once this time has elapsed, the product will enter the regeneration setting mode.
2. Regeneration level in the memory will be illuminated for 5 seconds when the regenerator
adjustment mode is activated.
3.To adjust the new Water Hardness Level, move the Programme Selection knob to the
position that is suitable for your supply water. (see, Water Hardness Level Adjustment
Table)
**Programme Selection knob rotates in 5 steps regardless of the number of the
programmes contained on the machine.
4. Press “Start/Pause/Cancel” key for once to store the level you have selected.
Washing, rinsing and drying performance of your dishwasher will improve when the water
softening system is adjusted correctly.
To adjust the system, first learn the water hardness in your region and adjust as indicated
below.
Quick Guide
Adjusting the water softening system
•If the hardness level of the water that you use is above 50°dH or if you are using well
water, than it is recommended to use filter and water purification devices.
•If the hardness level of the water that you use is below 7°dH, there is no need to use
salt in your dishwasher. In this case, the Salt Indicator light on the control panel of your
dishwasher will light continuously.
•If the water hardness is set to level 1, the Salt Indicator will light continuously although
it is not necessary to use salt. If you use salt under this condition, salt will not be
consumed and the lamp will not illuminate.
When moving, you will need to set the water hardness level of your dishwasher again
according to the information above, depending on the water hardness of the place you
have moved to. If the water hardness level of your machine is adjusted previously, your
machine will display the most recent hardness level adjustment.
Quick Guide
1588320100-AB_BEKO_A5_EN/26-04-21.(10:00)
Water hardness level adjustment table
Hardness
Level
English Water
Hardness °dE
German Water
Hardness °dH
French* Water
Hardness °dF
Position of
programme
selection
knob*
Water Hardness Level Indicator
Level 0 0-5 0-4 0-8 1 Washing lamp on the panel will
illuminate.
Level 1 6-9 5-7 9-13 1
Level 2 10-15 8-12 14-22 2 Drying lamp on the panel will
illuminate.
Level 3 16-19 13-15 23-27 3 End lamp on the panel will illuminate.
Level 4 20-24 16-19 28-34 4 Washing, Drying and End lamps on
the panel will illuminate.
Level 5
25-62 20-50 35-90 5
Washing, Drying and End lamps
on the panel will ash at 1-second
intervals.
Indice
Altri manuali Beko Rondella
Beko
Beko WTIK76151F Manuale utente
Beko
Beko WTG1041B2CW Manuale utente
Beko
Beko WMB 81443 PTHLC Manuale utente
Beko
Beko WMY 81283MB3 Manuale utente
Beko
Beko WUE 6612 XBCW Manuale utente
Beko
Beko WMP 8744 XD Manuale utente
Beko
Beko WTE12746X0 Manuale utente
Beko
Beko WCV9614XB0STW Manuale utente
Beko
Beko WMB 60811 PL FM Manuale utente
Beko
Beko WM 5100 S Istruzioni operative
Beko
Beko WTE 7612 BS Manuale utente
Beko
Beko WTB840E1W Manuale utente
Beko
Beko B3WFU57215MPB Manuale utente
Beko
Beko WMY 81083 LB3 Manuale utente
Beko
Beko WMB 71042 PTLMS Manuale utente
Beko
Beko WTE 7611 B0 Manuale utente
Beko
Beko WMI 71241 Manuale utente
Beko
Beko B3WT59410W2 Manuale utente
Beko
Beko WUE 7522 XW Manuale utente
Beko
Beko WEY96054W Manuale utente
