Belden Miranda SSP-3801 Scheda tecnica
SSP-3801
HD/SD Solid-State Playout Card
Installation & Quick Start Guide
6 June 2013
www.miranda.com
Copyright Notice
© 2013 Miranda Technologies Partnership. All rights reserved.
Third Party Trademarks
All other brand names, product names or trademarks belong to their respective holders.
Usage Agreement
Please read the following terms and conditions carefully. By using the SSP-3801 Installation
& Quick Start Guide, you agree to the following terms and conditions:
Miranda Technologies Partnership hereby grants permission and license to owners of the
SSP-3801 to use their product manuals for their own internal business use. Manuals for
Miranda Technologies Partnership products may not be reproduced or transmitted in any
form or by any means, electronic or mechanical, including photocopying and recording, for
any purpose unless specifically authorized in writing by Miranda Technologies Partnership.
Miranda Technologies Partnership makes no warranty, either expressed or implied,
including but not limited to any implied warranties of merchantability or fitness for a
particular purpose, regarding these materials and makes such materials available solely on
an “As-Is” basis.
In no event shall Miranda Technologies Partnership be liable to anyone for special,
collateral, incidental, or consequential damages in connection with or arising out of
purchase or use of these materials. The sole and exclusive liability to Miranda Technologies
Partnership, regardless of the form of action, shall not exceed the purchase price of the
materials described herein.
Miranda Technologies Partnership reserves the right to revise and improve its products at
any time and without notice. This publication describes the state of this product at the time
of its publication, and may not reflect the product at all times in the future. Thus, different
versions of a manual may exist for any given product. Care should be taken to ensure that
one obtains the proper manual version for a specific product serial number.
Information in this document is subject to change without notice and does not represent a
commitment on the part of Miranda Technologies Partnership.
Government Use
The Software {and Documentation} is provided with RESTRICTED RIGHTS. Use,
duplication or disclosure by the United States Government or any agency, department or
instrumentality thereof is subject to the restrictions set forth in the Commercial Computer
Software -- Restricted Rights clause at FAR 52.227-19 or the Commercial Computer
Software -- Licensing clause at NASA FAR Supplement 1852.227-86.
Document Identification
•Title: SSP-3801 Installation & Quick Start Guide
•Part number: M931-9900-100
•Software version: N/A
•Last revised: June 6, 2013
Document Revision History
After the original release date, this user manual may be updated with edits and then re-
released. The following table tracks the versions of this document.
Publication date Description
June 6, 2013 Original publication of the document.
Safety Compliance
Electromagnetic Compatibility
This equipment complies with the requirements of the following standards for
Safety of Information Technology Equipment:
• CSA C22.2 no. 60950-1-07 (2nd Edition)
• UL 60950-1 (2nd Edition)
• IEC/EN 60950-1 (2nd Edition)
Warning: An appropriately listed/certified main supply power cord must be used for the
connection of the equipment to the main voltage at either 120V~or 240V~
CAUTION: These servicing instructions are for use by qualified service personnel only.
To reduce the risk of electric shock, do not perform any servicing than that
contained in the operating instructions unless you are qualified to do so. Refer all
servicing to qualified service personnel. Servicing should be done in a static-free
environment.
This equipment has been tested for verification of compliance with FCC Part 15,
Subpart B requirements for Class A digital devices.
NOTE
This equipment has been tested and found to comply with the limits for a Class
A digital device, pursuant to Part 15 of the FCC rules. These limits are designed
to provide reasonable protection against harmful interference when the
equipment is operated in a commercial environment. This equipment
generates, uses and radiates radio frequency energy, and, if not installed and
used in accordance with the instruction manual, may cause harmful
interference in which case the user will be required to correct the interference
at his own expense.
This equipment has been tested and complies with the requirements of the
directive 2004/108/CE:
• EN 55022 Class A Radiated emissions
• EN 55022 Class A Conducted emissions
• EN 61000 -3-2 Harmonic current emission limits
• EN 61000 -3-3 Voltage fluctuation and flicker limitations
• EN 61000 -4-2 Electrostatic discharge immunity
• EN 61000 -4-3 Radiated EMF immunity-RF
• EN 61000 -4-4 Electrical fast transient immunity
• EN 61000 -4-5 Surge immunity
• EN 61000 -4-8 Power frequency magnetic field
• EN 61000 -4-11 Voltage dips, short interruption and voltage variation immunity
WARNING
The SSP-3801 contains Class 1 lasers, which are deemed safe under normal
operating conditions.
Standalone Equipment - Laser source(s) employed:
CLASS 1 LASER PRODUCT
APPAREIL A LASER DE CLASSE 1
Installation & Quick Start Guide TOC-1
TABLE OF CONTENTS
Introduction.......................................................................................................................... 1-1
SSP-3801 product description........................................................................................................... 1-2
Overview of the SSP-3801 card and its control interfaces .............................................. 2-1
SSP-3801 channel card..................................................................................................................... 2-2
SSP-3801 front card-edge components ....................................................................................... 2-4
SSP-3801 rear connector panel ........................................................................................................ 2-5
Densité frame’s local control panel.................................................................................................... 2-7
SSP-3801 web interface.................................................................................................................... 2-8
Installing the SSP-3801 in a Densité 3 frame .................................................................... 3-1
Installing the SSP-3801 rear connector panel ................................................................................... 3-2
Installing the SSP-3801 channel card ............................................................................................... 3-3
Cabling the SSP-3801 card ............................................................................................................... 3-4
Start up the SSP-3801 card............................................................................................................... 3-5
SSP-3801 initial configuration procedures........................................................................ 4-1
Verify and record some of the SSP-3801 default settings ................................................................. 4-2
Log into the SSP-3801 card’s web interface......................................................................................4-3
Configure the System Identity settings .............................................................................................. 4-4
Configure the Timing settings............................................................................................................ 4-6
Configure the Reference settings ...................................................................................................... 4-7
Configure the Input / Output settings................................................................................................. 4-8
Verify the accuracy of the SSP-3801 card’s settings......................................................................... 4-9
Upgrading the SSP-3801 card’s software........................................................................................ 4-10
Need further assistance?.................................................................................................... 5-1
Densité Local Control Panel menus for SSP-3801 ......................................... Appendix A-1
Installation & Quick Start Guide 1-1
1 INTRODUCTION
This guide is intended to provide you with basic SSP-3801 product information, as well as
an orientation of its hardware and software components. This guides also includes
instructions for performing a first-time installation of the SSP-3801 card into a Densité
frame, as well as initial setup tasks to get the card up and running.
NOTE
This guide does not offer descriptions of all of the SSP-3801 settings or usage instructions.
These topics will be covered in an SSP-3801 User Guide, which will be available in the near
future.
Installation & Quick Start Guide 1-2
Introduction
SSP-3801 product description
The SSP-3801 is a playout server on a card that can play back video and audio clips in a
variety of playout applications. In addition to playing out program content, the SSP-3801
has also some branding capabilities and can insert some pre-rendered graphics, thanks to
its built-in clip player, graphics stores and external fill & key input.
Figure 1-1. HD/SD Solid-State Playout card (SSP-3801)
The card includes storage, which allows up to 750GB of content to be played out. A unified
file format is expected (MXF Op1A) in an XDCAM HD or Sony IMX Profile up to a maximum
of 100 Mbit/sec.The Miranda worfklow can be used to encode / transcode and move content
onto the SSP-3801. Advanced functionalities such as branding pre-rendering / pre-burning
are also available, thus allowing for an optimized worfklow suitable for non-linear operations
The SSP-3801 also benefits from advanced monitoring capabilities, including a built-in
HD/SD baseband probe* which can be used to report playout errors such as blacks,
freezes, audio absence etc… An advanced finger print technology is also available, which
allows the content that is being played out to be compared to the original content that has
been prepared at the main playout facility. Full frame-rate proxies can also be enabled, thus
making the SSP-3801 an ideal solution for remote playout applications.
* This feature will be included in a future release.
Installation & Quick Start Guide 1-3
Introduction
Features and Benefits
• Playout server on a Densité card: 4 channels per 3RU and low power consumption
• Live input and on-board AB mixer, with audio capabilities
• SDI and playback support for the following video formats:
• 525i/59.94 (NTSC)
• 625i/50 (PAL)
• 1080i/50
• 1080i/59.94
• 720p/50
• 720p/59.94
• Built-in branding functionality, up to 4 keying layers to support graphics like lower-thirds
and logo stores
• Clips and content stored using on-board Solid State Storage
• One on-board enterprise-grade SSD (Solid state drives). A second SSD is
offered as an optional extra
• SSD capacities offered: 175GB (default), 275GB, 550GB and 750GB
• Clip, audio and ancillary data support for the following formats:
• SSP-3801 uses the industry standard MXF AS03 and AS11 clip wrapper
• MXF files that contain Video (MPEG2)
• Audio (PCM)
• Ancillary data track (SMPTE 436M as VBI lines or ANC packets)
• Web-based user interface for convenient remote configuration, operation and
monitoring.
• Control using external automation, or built-in playlist
• Advanced probing and monitoring capabilities, using Miranda iControl monitoring
system and/or Miranda Kaleido multi-viewers
Installation & Quick Start Guide 2-1
2 OVERVIEW OF THE SSP-3801 CARD
AND ITS CONTROL INTERFACES
Each SSP-3801 that is shipped consists of two (2) separate hardware components:
• SSP-3801 channel card
• SSP-3801 rear connector panel
There are also two (2) user interfaces that available to configure and control the SSP-3801
once it is install in a standard Miranda 3RU Densité frame:
• Densité local control panel
• SSP-3801 web interface
The following sections provide an orientation to the SSP-3801 hardware and software
components, including functional descriptions.
•“SSP-3801 channel card” on page 2-2
•“SSP-3801 rear connector panel” on page 2-5
•“Densité frame’s local control panel” on page 2-7
•“SSP-3801 web interface” on page 2-8
Altri manuali per Miranda SSP-3801
1
Indice
Altri manuali Belden Hardware per computer
Manuali Hardware per computer popolari di altre marche
EMC2
EMC2 VNX Series Manuale del proprietario
Panasonic
Panasonic DV0PM20105 Manuale utente
Mitsubishi Electric
Mitsubishi Electric Q81BD-J61BT11 Manuale utente
Gigabyte
Gigabyte B660M DS3H AX DDR4 Manuale utente
Raidon
Raidon iT2300 Manuale utente
National Instruments
National Instruments PXI-8186 Manuale utente
