Belkin F5U222V Manuale utente
P73890 F5U222
Belkin USB 2.0
Hi-Speed CardBus Card
Introduction
Welcome to USB 2.0!
Thank you for purchasing the Belkin USB 2.0 Hi-Speed
CardBus Card. Now you can upgrade your computer with the
latest USB technology. You will be able to take advantage of
a host of new high-speed USB 2.0 products that will be
introduced soon. USB 2.0 products–including hard drives,
scanners, printers, and video cameras–will all work much
faster than ever before. Your current USB devices will
continue to work as they always have, and in some cases
even better. Follow the simple installation instructions in this
manual to get your CardBus Card up and running, then enjoy
the speed and convenience of USB.
1
Features
2
• Three USB host adapters integrated into a single CardBus
Card, one USB 2.0 EHCI host controller providing 480Mbps of
USB bandwidth, and two USB 1.1 OHCI host controllers
providing 12Mbps of USB bandwidth each
• Two downstream high-speed USB ports
• Simultaneous connection capability of low-, full-, and
high-speed devices
• Auto-detection of new devices as they are connected, as well
as the speed of each new device
• Backward-compatibility with USB 1.1 devices
• Full compliance with USB specifications
• Plug-and-Play technology
• A Belkin Lifetime Warranty
• Open Host Controller Interface- (OHCI-) compliant
(USB 1.1 Host Controller)
• Enhanced Host Controller Interface- (EHCI-) compliant
(USB 2.0 Host Controller)
• PCI revision 2.1-compliant
• Current: 500mA per port
• USB revision 2.0-compliant
• 3.5mm DC power jack
• Power Supply
Input 100-120 VAC
Output 5 VDC 2.4 A
• Power Supply Polarity
Package Contents
• Belkin USB 2.0 Hi-Speed CardBus Card
• Optional 5-volt, 2.4-Amp power supply
• User Manual
• Driver Installation CD-ROM
Specifications
3
System Requirements
4
• PC-compatible laptop computer with available 32-bit
Type II CardBus slot
• Windows®98 SE, 2000, Me, or XP operating system
Operating System Compatibility
Operating System USB 1.x USB 2.0
Support Support
Windows 98 SE Yes Yes
Windows 2000 Yes Yes
Windows Me Yes Yes
Windows XP Yes Yes
Installation
Please refer to the section that corresponds to your Windows
operating system (OS).
Installation Procedure for Windows 98 SE OS
This procedure will install two USB 1.1 host controllers and
one USB 2.0 enhanced host controller.
(1) Plug the provided power supply into an AC wall outlet
or surge protector, then insert the DC power connector
into the power jack on the CardBus Card.
(2) Locate your laptop computer's CardBus slot.
(3) Insert the CardBus Card into the slot. Apply pressure
as needed until it is fully seated.
(4) Turn on power and start the Windows OS.
(5) Insert the Belkin USB 2.0 driver installation CD into
your computer's CD-ROM drive.
(6) The Windows OS will detect “NEC USB Open Host
Controller” and the “Add New Hardware Wizard”
dialog box will open. Click “Next”.
(7) Select “Search for the best driver for your device”
and click “Next”.
(8) Uncheck all the boxes and click “Next”.
(9) The Windows OS will find the driver for “NEC USB
Open Host Controller”. Click “Next”.
(10) The Windows OS may ask you for the Windows OS
installation CD. If asked, insert the CD into the CD-ROM
drive and follow the prompts.
(11) After the Windows OS installs the required drivers,
installation of the first USB 1.1 host controller is
complete. Click “Finish”.
5
Installation (continued)
6
(12) The “Add New Hardware” wizard will repeat the
installation process for the second USB 1.1 host controller.
(13) After installation of the two USB 1.1 host controllers, the
Windows OS will detect “PCI Universal Serial Bus”. This is
the USB 2.0 EHCI host controller.
(14) The “Add New Hardware Wizard” dialog box will open.
Click “Next”.
(15) Select “Search for the best driver for your device”
and click “Next”.
(16) Check the “CD-ROM drive” box. Click “Next”.
(17) The Windows OS will locate the driver for “Belkin USB
2.0 Hi-Speed Host Controller”. Click “Next”.
(18) The Windows OS will now install the enhanced host
controller driver. Click “Finish”.
(19) After installation of the USB host controllers, the Windows
OS will detect “USB Root Hub” and automatically install
the required driver support. This will repeat for each of
the two USB OHCI host controllers.
Installation is now complete.
7
Installation (continued)
Verifying Proper Installation (Windows 98/98 SE OS)
Check the “Windows Device Manager” to verify that your
CardBus Card has been properly installed.
(1) Right-click on “My Computer” and select “Properties”.
(2) Select the “Device Manager” tab.
(3) Click on the plus sign (+) next to “Universal Serial
Bus Controllers”.
The “Device Manager” list will now include two “NEC
USB Open Host Controller” entries, one “Belkin USB 2.0
Hi-Speed Host Controller” entry, and two additional “USB
Root Hub” entries.
Installation Procedure for Windows 2000 OS
This installation procedure will install two USB 1.1 host
controllers and one USB 2.0 enhanced host controller.
(1) Plug the provided power supply into an AC wall outlet or
surge protector, then insert the DC power connector into
the power jack on the CardBus Card.
(2) Locate your laptop computer’s CardBus slot.
(3) Insert the CardBus Card into the slot. Apply pressure
as needed until it is fully seated.
(4) Turn on power and start the Windows OS.
(5) Insert the Belkin USB 2.0 driver installation CD into your
computer’s CD-ROM drive.
8
(6) After loading, the Windows OS will detect “NEC PCI to
USB Open Host Controller”. The required driver support
will be automatically installed. No user input is required.
This will repeat one more time.
(7) The Windows OS will detect “Universal Serial Bus (USB)
Controller”. This is the USB 2.0 EHCI host controller. The
“Found New Hardware Wizard” window will appear. Select
“Search for a suitable driver for my device (recommended)”
and click “Next”.
(8) Check the “CD-ROM drive” box. Click “Next”.
(9) The Windows OS will find “Belkin USB 2.0 Hi-Speed Host
Controller”. Click “Next”.
(10)The Windows OS will now install the enhanced host
controller driver. Click “Finish”.
Installation is now complete.
Verifying Proper Installation (Windows 2000 OS)
After installation, check the “Windows Device Manager” to
verify that your CardBus Card has been properly installed.
(1) Right-click on “My Computer”.
(2) Select “Properties”.
(3) Select the “Hardware” tab and click on the “Device
Manager” button.
(4) Click the plus sign (+) next to “Universal Serial
Bus Controllers”.
Installation (continued)
The “Device Manager” list will now include two “NEC
USB Open Host Controller” entries, one “Belkin USB 2.0
Hi-Speed Host Controller” entry, and two additional “USB
Root Hub” entries.
Installation Procedure for Windows Me OS
This installation procedure will install two USB 1.1 host
controllers and one USB 2.0 enhanced host controller.
(1) Plug the provided power supply into an AC wall outlet or
surge protector, then insert the DC power connector into
the power jack on the CardBus Card.
(2) Locate your laptop computer’s CardBus slot.
(3) Insert your CardBus Card into the slot. Apply pressure
as needed until it is fully seated.
(4) Turn on power and start the Windows OS.
(5) Insert the Belkin USB 2.0 driver installation CD into your
computer’s CD-ROM drive.
(6) After loading, the Windows OS will detect “NEC USB
Open Host Controller (E13+)”. The required driver
support will be automatically installed. No user input
is required.
(7) The Windows OS will detect “PCI Universal Serial Bus”.
This is the USB 2.0 EHCI controller. The “Add New
Hardware Wizard” window will appear.
(8) Select “Automatic search for a better driver
(recommended)”. Click “Next”.
(9) Check the “CD-ROM drive” box. Click “Next”.
9
Installation (continued)
Questo manuale è adatto per i seguenti modelli
3
Indice
Altri manuali Belkin Hardware per computer
Belkin
Belkin F5U504ea Manuale utente
Belkin
Belkin F4U024 Manuale utente
Belkin
Belkin Wireless Gplus Notebook Card Manuale utente
Belkin
Belkin Wireless G F5D7000 Manuale utente
Belkin
Belkin F5U252ea Manuale utente
Belkin
Belkin F8T002 Manuale utente
Belkin
Belkin F4U024 Manuale utente
Belkin
Belkin F5U213 Manuale utente
Belkin
Belkin F5D8001 Manuale utente
Belkin
Belkin F5D8071ak Manuale utente
Manuali Hardware per computer popolari di altre marche
EMC2
EMC2 VNX Series Manuale del proprietario
Panasonic
Panasonic DV0PM20105 Manuale utente
Mitsubishi Electric
Mitsubishi Electric Q81BD-J61BT11 Manuale utente
Gigabyte
Gigabyte B660M DS3H AX DDR4 Manuale utente
Raidon
Raidon iT2300 Manuale utente
National Instruments
National Instruments PXI-8186 Manuale utente
