BKM 1250 A1 GB│IE│NI │ 7 ■
First use
WARNING – RISK OF INJURY!
► Only use fresh drinking water! Do not consume any water that is not certi-
fied as drinkable. If you do, you are taking a risk with your health!
Before starting to use the appliance, ensure that ...
– the appliance, power plug and power cord are in perfect condition and ...
– all packaging materials have been removed from the appliance.
1) Remove the water tank by holding its handle and slightly tipping the tank
out of the appliance.
2) Fill the water tank . The water level must always reach at least the MIN
mark and never exceed the MAX mark on the water tank .
3) Place the water tank back in the appliance.
4) Place the capsule container on the drip tray (see fold-out page).
Place the grille of the "Lungo" stand on the drip tray .
5) Push the capsule container with the drip tray forwards into the appliance.
6) If opened: Push down the lever to the lowest possible position.
7) Fold the "Espresso" stand , located on the capsule container , upwards.
8) Place a cup under the coffee dispenser on the "Lungo" stand .
9) Insert the plug into a mains power socket.
10) Switch on the appliance by pressing the Espresso or Lungo
button. Both buttons flash to indicate that the appliance is heating up. As
soon as both buttons light up permanently, the appliance has heated up.
11) Press the Lungo button. Water flows through the pipes and cleans the
appliance. Residues resulting during production are flushed out of the pipes.
12) Repeat this process 3 times. If necessary, empty the cup from time to time.
The appliance is now ready for use.
