IMPORTANT SAFETY INSTRUCTIONS
When setting up
►Check the mains voltage available at the installation site and
only start up the grinderif it corresponds to the voltage range
specified on the nameplate.
►Lay the connection cable so that nobody can trip over it and it
does not come into contact with sharp or very hot objects.
►Only connect the grinder to an earthed socket. If you are
unsure, contact an electrician.
►Do not set up the device near strong heat or fire sources to
avoid damage.
►Set up the grinder on a level and stable surface. Avoid unsafe
documents that can tip over or be knocked over while walking
by.
►Set up the grinder out of the reach of children and people with
limited abilities.
During commissioning
►Do not operate the grinder if the device or the power
cord are damaged. In this case, contact your specialist
dealer or contact Bellezza.
Operational
►Switch the grinder off immediately and pull the power plug
out of the socket if the power cord is damaged. Be careful not
to touch the damaged area. Contact your specialist dealer and
have the defective cable replaced. Do not put the grinder back
into operation until the damage has been properly repaired.
►Children from the age of 8 and people with limited physical,
sensory or mental abilities may only operate the grinder after
receiving appropriate instruction. If necessary, supervise the
persons while operating the grinder.
For cleaning and maintenance
►Before cleaning and maintenance work:
–Let the grinder cool down.
–Disconnect the grinder from the mains voltage.
►Only use a damp cloth to clean the grinder. Do not immerse
the grinder in water or other liquids.
6/ 18 Bellezza | Espresso machines
Important safety instructions
