Bellfires CLASSIC BELL SMALL 3 PF Guida
Bell•res wishes you many cosy evenings with your new Bell•res gas •re
This document is an essential part of your gas •re.
Read it carefully before installation and maintenance
of the gas •re and keep it in a safe place!
INSTALLATION INSTRUCTIONS &
MANUAL FOR MAINTENANCE
CLASSIC BELL SMALL 3 PF
Gas •re with closed combustion system
Serial number:
Production date:
3
English
Installation instructions
BELLFIRES GAS FIRE WITH CLOSED COMBUSTION SYSTEM:
Classic Bell Small 3 PF (Premium Fire) (CLBS3 PF)
4
English
Installation instructions
5
English
Installation instructions
The installation must only be carried out by a
“Gas Safe Register” registered installation engineer.
IMPORTANT
CONTENTS
Page
1. INSTALLATION INSTRUCTIONS .............................................................. 7
2. MAINTENANCE ......................................................................................... 58
3. FAULTS ...................................................................................................... 60
4. DISMANTLING / ASSEMBLING OF THE GLASS,
THE REGULATOR AND BURNER ..
...
....................................
.
........
........
. 61
5. CONNECTING DIAGRAM .............................................................
.........
... 79
6. DIMENSIONS ............................................................................................ 80
7. TECHNICAL DETAILS/REGULATIONS .................................................... 82
8. REPLACEMENT PARTS LIST .................................................................. 84
9. DISPOSAL OF PACKAGING AND APPLIANCE ....................................... 87
6
English
Installation instructions
7
English
Installation instructions
1 INSTALLATION INSTRUCTIONS
1.1 GENERAL
The gas fire must be positioned and connected as a “room sealed system” (balance
flue) appliance by a “Gas Safe Register” registered gas installation engineer in
accordance with the following installation instructions, nationally and locally applicable
regulations (see “Technical Details/ Regulations” at the rear of this manual). If you have
any queries regarding the installation, please consult your local gas company.
Important: Before beginning the installation, check that the details on the
rating plate correspond to the gas type and pressure to which
the appliance will be connected.
The appliance is factory set to the correct nominal heat input. The pilot light is set to the
correct level of consumption.
Depending on the version requested, the appliance is delivered from the factory with a
Ø100 mm - Ø150 mm or Ø130 mm - Ø200 mm concentric connection for the removal of
the smoke gases and the supply of combustion air.
It is possible to install the gas fire with either a wall or roof outlet.
The roof connection must be carried out using the concentric flue system Ø100 mm -
Ø150 mm. The fumes are exhausted naturally to the outside environment through the
inner Ø100 mm pipe whereas the combustion air supply passes between the Ø100 mm
and Ø150 mm pipes.
The wall connection must be carried out using the concentric flue system Ø130 mm -
Ø200 mm. The flue gases are evacuated outside by means of natural draft through the
internal pipe of Ø130 mm, whereas the combustion air is supplied between the pipes of
Ø130 mm and Ø200 mm. The wall outlet itself is Ø100 mm - Ø150 mm.
The gas fire can be installed in a completely sealed or mechanically ventilated house
without extra ventilation and/or fume extraction.
The gas fire can be installed as an insertion into an existing open fire place or as
a built-in appliance in a new fire place.
In order to prevent the fireplace heating up excessively, it must be properly
ventilated by installing vents at the top and bottom of the fireplace.
If an existing chimney is to be used, please consult your installer first. If the chimney
was previously used for a wood or coal fire, then it should be cleaned by an expert.
8
English
Installation instructions
N.B. If any part is missing, please contact your dealer.
1.3 INCLUDED
Set documentation - Installation instructions & Manual for maintenance
- Instructions for Concentric Components
- Instructions for use & Manual daily maintenance
Attributes - Ceramic log set
- Fire glass “Black”
- Fire glass “Dark Amber”
- Embers
- Decorative ash
1.2 CONCENTRIC FLUE SYSTEMS Ø100 MM - Ø150 MM AND
Ø130 MM - Ø200 MM: • Bellfires - Muelink & Grol System
• Poujoulat - PGI Ssystem
• Ontop - Metaloterm US System
• Jeremias/STB - H-Twin System (STB = Chimney-
Technics Brummen NL)
• Jeremias - TWIN-GAS System
The gas fire, in combination with the concentric flue system [Ø100 mm - Ø150 mm]
and/or [Ø130 mm - Ø200 mm] (rigid and/or flexible)
for the brand types mentioned
above, has been approved in accordance with the European CE-norm for gas
appliances and may therefore be used only with these systems.
The permitted components for these systems are listed in instructions enclosed:
CONCENTRIC COMPONENTS SUITABLE FOR THE INSTALLATION OF A
BELLFIRES GAS FIRE WITH CLOSED COMBUSTION. The guarantee on the
appliance lapses if it is installed, fully or partially, with other components or a different
flue system.
The concentric flue [Ø100 mm - Ø150 mm] and [Ø130 mm - Ø200 mm] systems can be
used with either a newly-built or existing chimney.
9
English
Installation instructions
1.4 OPTIONS AND ACCESSORIES
The following options and accessories can be supplied by your dealer:
Part no Option
Convection package Classic Bell Small 3
342397 • 1x Convection top plate
342398 • 1x Convection rear plate
324892 • 1x Convection set General
329708 Set high adjustable feet (4 pieces)
Part no Accessorie
324892 Convection set General: (for convection air extraction)
302188 • 2x Flexible aluminium pipe Ø125 mm, L= 3 m (max.)
310178 • 2x Fitting box 135 x 135 mm
309872 • 2x Convection exit grid, white, 145 x 145 mm
304040 • 4x Hose clamp Ø125 mm
329874 Set carrying brackets (2 pieces)
3........ Bellfires (M&G) concentric flue system
See the Instructions for Concentric Component
3........ Poujoulat (PGI) concentric flue system
See the Instructions for Concentric Component
3........ Ontop (Metaloterm US) concentric flue system
See the Instructions for Concentric Component
3......... Jeremias (H-TWIN) concentric flue system
See the Instructions for Concentric Component
3......... Jeremias (TWIN-GAS) concentric flue system
See the Instructions for Concentric Component
10
English
Installation instructions
1.5 PREPARATION FOR INSTALLATION
The following preparation must be carried out before the gas fire can be installed.
1.5.1 Instructions for positioning the outlet
1.5.1.1 Positioning the outlet for correct operation:
Roof-mounted outlet:
Figure 1: Roof-mounted outlet
This must be positioned at least 0.5 m from the roof edge;
the apex of the roof can be disregarded.
Wall-mounted outlet:
Figure 2: Wall-mounted outlet
This must be positioned at least 0.5 m from:
• the corner of the building.
• the roof overhang, the rain gutter.
• balconies etc., unless the exhaust construction
extends to at least the face of the protruding section.
>0.5 m
>0.5 m
Altri manuali per CLASSIC BELL SMALL 3 PF
1
Questo manuale è adatto per i seguenti modelli
1
Indice
Altri manuali Bellfires Camino da interno
Bellfires
Bellfires Derby Large Tunnel 3 CF Manuale utente
Bellfires
Bellfires VIEW BELL DERBY 3 LF Manuale di installazione e funzionamento
Bellfires
Bellfires VIEW BELL TOPSHAM 3 CF Manuale utente
Bellfires
Bellfires Box Gas Panorama 45 Manuale
Bellfires
Bellfires Smart Bell 65 MF Manuale utente
Bellfires
Bellfires SMART BELL 90-80 PF Guida
Bellfires
Bellfires Smart Bell 60 MF Manuale utente
Bellfires
Bellfires VERTICAL BELL SMALL TUNNEL 3 CF Guida
Bellfires
Bellfires Smart Bell 55 Istruzioni operative
Bellfires
Bellfires VENTO CLASSIC LARGE Manuale di installazione e funzionamento
Bellfires
Bellfires Room Divider Large 3 Manuale utente
Bellfires
Bellfires BEL VBMT-3NG-SB Manuale utente
Bellfires
Bellfires horizon bell xl 3 cf Manuale utente
Bellfires
Bellfires SMART BELL 80 PF Guida
Bellfires
Bellfires SLIDE BELL Guida all'installazione
Bellfires
Bellfires ROOM DIVIDER MEDIUM 3 CF Manuale utente
Bellfires
Bellfires HORIZON BELL XXL Guida all'installazione
Bellfires
Bellfires Smart Bell Panorama 45/59 MF Manuale
Bellfires
Bellfires Smart Bell Panorama 73/52 MF Manuale
Bellfires
Bellfires Corner Bell XL 3 L/R CF Manuale di installazione e funzionamento
