Bellfires Derby Guida all'installazione
INSTALLATION INSTRUCTIONS AND INSTRUCTIONS FOR USE
Gas fires with closed combustion system
Bellfires wishes you many cosy evenings with your new Bellfires gas fire
This document is an essential part of your gas fire.
Read it carefully before installation and use of the
gas fire and keep it in a safe place!
3
Bellfires English
Instructions for use and installation instructions
BELLFIRES GAS FIRES WITH CLOSED COMBUSTION SYSTEM:
Derby
Derby II
Jersey
Flat Bell
Topsham
Topsham Tunnel
York
Kent
Retro Bell Large
Retro Bell Intermediate
Retro Bell Small
Retro Bell Solo
View Bell
Corner Bell Large
Corner Bell Small
Horizon Bell XL
Horizon Bell Large
Horizon Bell Large Tunnel
Horizon Bell Medium
Horizon Bell Small
Horizon Bell Small Tunnel
Vertical Bell Large
Vertical Bell Large Tunnel
Vertical Bell Small
Smart Bell
4
Bellfires English
Instructions for use and installation instructions
5
Bellfires English
Instructions for use and installation instructions
CONTENTS
1. WARRANTY TERMS .................................................................................
2. INSTRUCTIONS FOR USE .......................................................................
3. INSTALLATION INSTRUCTIONS ..............................................................
4. MAINTENANCE .........................................................................................
5. FAULTS ......................................................................................................
6. ELECTRICAL DIAGRAM ...........................................................................
7. DIMENSIONS ............................................................................................
8. TECHNICAL DETAILS/REGULATIONS ....................................................
9. REPLACEMENT PARTS LIST ..................................................................
10. DISPOSAL OF PACKAGING AND APPLIANCE .......................................
Page
7
9
19
67
68
69
70
83
97
99
6
Bellfires English
Instructions for use and installation instructions
7
Bellfires English
Instructions for use and installation instructions
Bellfires gas fire
Warranty
Bellfires guarantees the quality of the supplied hearth and the quality of the
materials used.
This warranty runs for a period of twelve (12) months from first use of the hearth
and covers defects which are a result of construction faults or the failure of
component parts.
Bellfires has an obligation under the terms of this warranty (at its discretion) not
to charge for the replacement of any component parts.
Note: The following aspects are not covered under the terms of the warranty:
-defects arising which are attributable in whole or in part to:
aNot paying due heed to installation, operating and maintenance
instructions
bFitting/installation or repair by third parties (including the buyer)
cHeat cracks arising in the jacket due to normal heating
dDiscolouration in the ironwork as a result of heat transfer
-the grate, the thermocouple and the glass of the product
Should you wish to claim under the warranty,
please contact your dealer.
Please carefully retain your invoice with this warranty!
Your Bellfires dealer: Date of installation:
Bellfires
Hallenstraat 17
NL-5531 AB Bladel
Tel. + 31 497 339200 Fax. + 31 497 339210
1. WARRANTY TERMS
∇
8
Bellfires English
Instructions for use and installation instructions
9
Bellfires English
Instructions for use and installation instructions
2INSTRUCTIONS FOR USE
2.1 INTRODUCTION
Congratulations on your purchase of this modern Bellfires gas fire. This quality product
will provide you with many years of enjoyment due to the flame effect and warmth that it
provides. Please read the instructions for use carefully before using the appliance for
the first time. Keep this booklet in a safe place.
2.2 BUILT-IN PROTECTION OF THE APPLIANCE
The appliance is fully protected by means of a thermo-electric pilot light shut off in the
event of a gas escape from the main burner.
2.2.1 Safety
Do not place embers, vermiculite granules, wood logs or pebbles
against the pilot light burner. Make sure that the pilot flame can
burn at all times freely over the main burner. Only in this way is
proper ignition of the main burner ensured.
Ignoring these directions could lead to a dangerous situation.
It is essential that the appliance, the complete concentric flue
system and the outlet are cleaned and inspected annually by a
recognised fitter/gas specialist. The safe operation of the appliance
will thus remain guaranteed.
See for additional instructions Chapter 4: Maintenance.
If the pilot flame goes out for any reason, wait for 5 minutes before
attempting to re-light it.
The gas fire must never be used with the door open or the door glass
removed.
Never place flammable material on the ceramic log set.
The filling of the main burner with embers, vermiculite granules, wood
logs and pebbles may not under any circumstances be changed or
added to.
Do not place easily-flammable materials, such as nylon clothing or
flammable liquids, in the vicinity of the gas fire.
10
Bellfires English
Instructions for use and installation instructions
Ensure at all times that children and other people who are not
aware of the operation of the gas appliance are only in the vicinity
of the appliance exclusively under supervision.
Use a fireguard to protect the people and children mentioned
above against possible burns.
2.3 OPERATING YOUR GAS FIRE - GENERAL
Read these instructions carefully before lighting the fire!
The gas fire can be operated with a pilot light that burns continuously. The ignition and
control knob is located at the bottom of the front of your gas fire or outside the gas fire
in a special box (supplied). If the control knob is fitted to the front of the gas fire, the
gas fire frame must be removed to access the knob.
The pilot light is situated in the front of the burner, behind a cowl. Should the pilot light
go out, you must wait five (5) minutes before attempting to re-ignite the fire.
Important
The burner is operated using the control knob. Select the required setting and the
burner will then burn at this setting until it is changed.
2.4 HAND CONTROL
The burner is operated using the control knob. Select the required setting and the
burner will then burn at this setting until it is changed.
“OFF” POSITION
IGNITION POSITION
CONTROL KNOB
BURNER CONTROL RANGE
Figure 1: Gas regulator block BM 733
11
Bellfires English
Instructions for use and installation instructions
2.4.1 Igniting the fire
•Open the gas supply valve in the gas pipe to the appliance.
•Press in the control knob and turn it (clockwise) as far as possible. It is now in the
“off” position.
•Press the control knob and turn it anti-clockwise to the “PILOT” ignition position.
You will hear a click, which is the spark for the pilot light. You may have to “click”
several times before the pilot light ignites.
•Once the pilot light is ignited, hold in the knob for another ten (10) seconds and
then release it.
If the pilot flame goes out, then wait for at
least 5 minutes before repeating the above
procedure.
•The burner is ignited by turning the knob anti-clockwise to the desired setting.
2.4.2 Turning off the fire
Press the knob and turn it to “PILOT”.
The burner will continue to burn for a few seconds before being extinguished.
2.4.3 Extinguishing the pilot light
You can extinguish the pilot light by pressing the control knob when it is in the “PILOT”
position and turning it clockwise to the “OFF” position.
If the gas fire is not going to be used for a long period of time, it is recommended to
close the gas supply valve to the fire.
If the pilot flame goes out for any reason,
wait for 5 minutes before attempting to
re-light it.
If the pilot light frequently goes out, then please contact your installer.
2.5 REMOTE CONTROL
2.5.1 General
The appliance is opperated by radio remote control. This comprises a hand-held
transmitter and a receiver. The receiver is part of the gas control block assembly.
The receiver and the gas control block are behind the (white) panel door (operating
unit) next to the appliance. Press the door inwards to open; this will release the catch
and the door will spring out.
or:
The receiver and the gas control block are behind the operating flap at the bottom of
the appliance. Pull the flap forward to open.
Altri manuali per Derby
1
Questo manuale è adatto per i seguenti modelli
23
Indice
Altri manuali Bellfires Camino da interno
Bellfires
Bellfires ROOM DIVIDER MEDIUM 3 CF Manuale utente
Bellfires
Bellfires Free Bell Guida all'installazione
Bellfires
Bellfires Smart Bell Panorama 73/52 MF Manuale
Bellfires
Bellfires VIEW BELL XXL 3 CF Guida
Bellfires
Bellfires VIEW BELL TOPSHAM 3 CF Manuale utente
Bellfires
Bellfires HORIZON BELL XS 3 CF Guida
Bellfires
Bellfires DERBY LARGE 3 CF Manuale utente
Bellfires
Bellfires Derby Large Tunnel 3 CF Manuale utente
Bellfires
Bellfires UNICA 200 L Manuale tecnico
Bellfires
Bellfires Smart Bell 65 MF Istruzioni operative
Bellfires
Bellfires Derby Guida all'installazione
Bellfires
Bellfires Corner Bell Large 3 L/R CF Manuale di installazione e funzionamento
Bellfires
Bellfires VENTO CLASSIC LARGE Manuale di installazione e funzionamento
Bellfires
Bellfires Smart Bell 65/55 MF Istruzioni operative
Bellfires
Bellfires VIEW BELL LARGE 3 CF Manuale di installazione e funzionamento
Bellfires
Bellfires Corner Bell XL 3 L/R CF Manuale di installazione e funzionamento
Bellfires
Bellfires Smart Bell 55 Istruzioni operative
Bellfires
Bellfires SLIDE BELL 55 - 55 Guida all'installazione
Bellfires
Bellfires Smart Bell 80 MF Istruzioni operative
Bellfires
Bellfires VENTO CLASSIC SMALL Guida
