Benchmark Games GOLDZONE Manuale utente

TABLE OF CONTENTS

INTRODUCTION 1

WARNINGS 2

GAME SETUP 3

GAMEPLAY 4

COIN MECH SETUP 5

COIN CHUTE DESCRIPTION 6

FLOURESCENT LIGHTS 7

PLAYFIELD ASSEMBLY 8

PROGRAMMING 9

SCHEMATICS PLAYER 1

CPU CPU-1

4 DIGIT DISPLAYS SCHEM-2

TICKET DISPENSER, SPEAKER, COUNTERS SCHEM-3

ROTATING PLAYFIELD, HOPPER, HALOGEN LIGHT SCHEM-4

COIN MECH, OPTO SWITCH, TILT, JACKPOT SWITCH SCHEM-5

SCHEMATICS PLAYER 2

4 DIGIT DISPLAYS SCHEM-2

TICKET DISPENSER, SPEAKER, COUNTERS SCHEM-3

ROTATING PLAYFIELD, HOPPER, HALOGEN LIGHT SCHEM-4

COIN MECH, OPTO SWITCH, TILT, JACKPOT SWITCH SCHEM-5

SCHEMATICS PLAYER 3

4 DIGIT DISPLAYS SCHEM-2

TICKET DISPENSER, SPEAKER, COUNTERS SCHEM-3

ROTATING PLAYFIELD, HOPPER, HALOGEN LIGHT SCHEM-4

COIN MECH, OPTO SWITCH, TILT, JACKPOT SWITCH SCHEM-5

TROUBLESHOOTING GUIDE SCHEM-6

TROUBLESHOOTING CONT'D. SCHEM-7

DEAR CUSTOMER:

THANK YOU FOR PURCHASING BENCHMARK GAME’S GOLD ZONE

GAME.

BECAUSE OF THE DIFFERENT NEEDS OF EVERY LOCATION, YOU MAY

NEED TO FINE TUNE THE MACHINE IN THE FUTURE. WE STRONGLY

SUGGEST THAT YOU LEAVE THE MACHINE AT FACTORY SETTINGS FOR AT

LEAST 2 TO 3 WEEKS. AFTER THIS TIME IF YOU FIND NECESSARY YOUR

PAYOUT TOO LOW OR TOO HIGH, THEN MAKE THE PROPER

ADJUSTMENTS. START FIRST WITH THE FACTORY DEFAULT SETTINGS.

YOU WILL FIND ENCLOSED IN THE MANUAL A SET OF INSTRUCTIONS ON

HOW TO PROGRAM YOUR MACHINE SHOULD YOU NEED TO.

PLEASE READ THE MANUAL BEFORE YOU CALL US FOR

ANY INFORMATION. WHEN YOU CALL PLEASE HAVE

THE SERIAL NUMBER FOR YOUR GAME IN HAND.

BENCHMARK GAMES, INC.

51 HYPOLUXO RD.

HYPOLUXO, FL 33462

561-588-5200

PARTS FAX: 561-493-2990

DO NOT TURN GAME ON UNTIL THE FOLLOWING INSTRUCTIONS ARE READ AND

UNDERSTOOD.

FAILURE TO ADHERE TO THE FOLLOWING INSTRUCTIONS WILL VOID ANY FACTORY

WARRANTIES AND COULD RESULT IN DAMAGE TO THE GAME AND OR INJURY TO THE

PLAYER OR TECHNICIAN.

THIS GAME SHOULD BE PLUGGED INTO A 3 WIRE GROUNDED OUTLET 115VAC 60 HZ. UNLESS

OTHERWISE SPECIFIED.

FCC PART 15 RULE:

THIS EQUIPMENT HAS BEEN TESTED AND FOUND TO COMPLY WITH THE LIMITS FOR A CLASS

A COMPUTING DEVICE PURSUANT TO SUB-PART J OF PART 15 OF FCC RULES.

ELECTRICAL SPECIFICATIONS:

POWER CONSUMPTION 1.5 AMP 180 WATT

LINE VOLTAGE 100-130VAC 60HZ.

LINE FUSE 5 AMP

THE GAME, TECHNICAL MANUAL, GRAPHIC DESIGNS AND SCHEMATIC DIAGRAMS ARE

PROTECTED BY THE U.S. COPYRIGHT ACT OF 1979. BENCHMARK GAMES WILL ENFORCE ITS

WARNING:

BALL HOLES

LOCKS

GLASS

GOLDZONE SETUP

1. REMOVE GAME FROM BOX.

2. OPEN WOOD DOOR AND REMOVE CASHBOX. REMOVE THE POWER

PLUG, SPINNER ASSEMBLY AND THE PLATTER BALLS,(7/16" METAL BALLS).

3. REMOVE THE GLASS BY UNLOCKING THE LOCK AT THE TOP CORNERS OF THE GLASS

AND PULLING THE GLASS OUT,(NOTE: THE COIN MECH WILL BECOME UNPLUGGED).

4. INSTALL THE 3 WHEELED HUB ONTO THE CENTER SHAFT OF THE ROTATING

PLATTER, THEN INSTALL THE ALUMINUM SPINDLES ON TOP OF THE HUBS.

5. INSTALL THE PLATTER BALLS INTO THE HOLES ON THE PLATTER.

6. TURN GAME ON AND SLOWLY START PUTTING COINS ONTO THE PLAYFIELD TO

SEED THE GAME. KEEP PUTTING ON COINS UNTIL COINS ARE FALLING OFF THE

PLAYFIELD ALL AROUND THE PLATTER,(THE PLATTER IS NOW FULLY SEEDED).

7. REASSEMBLE THE GLASS ON ALL ,(MAKING SURE YOU PLUG IN THE COIN

MECHS WHILE INSTALLING THE GLASS).

8. USING THE POWER PLUG, PLUG IN THE GAME ON THE RIGHT SIDE OF THE GAME ON

THE OUTSIDE AND TURN POWER SWITCH ON,(LOCATED WHERE THE PLUG GOES

INTO THE CABINET}.

THERE IS A ROTATING PLATTER THAT TURNS AT A CONSTANT SPEED. THE 4 DIGIT LED'S AT THE

TOP OF EACH PLAYER KEEPS TRACK OF THE JACKPOT AMOUNT AND THE TICKETS OWED. COINS CAN

BE INSERTED AS FAST,(RAPID PLAY), AS THE PLAYER CAN INSERT THEM.

THE PLAYER INSERTS A COIN INTO THE GAME, THE COIN THEN SLIDES DOWN THE COIN RAMPS ONTO

THE ROTATING PLATTER. THE ROTATING PLATTER CAUSES THE COIN TO MOVE DOWN THE POINTER

TO THE OUTSIDE OF THE PLATTER . IF THE COIN FALLS INTO THE JACKPOT HOLES, THEN THE

JACKPOT AMOUNT ON THE LEFT 4 DIGIT DISPLAY IS PAID.

NOTE: THE JACKPOT COUNTER WILL INCREMENT FOR EVERY COIN PLAYED .

IF COINS FALL OFF THE PLAYFIELD THEY ARE COUNTED BY THE HOPPER AND THE

APPROPRIATE AMOUNT OF TICKETS ARE PAID OUT.

SECURITY: ON POWER UP THE HOPPER EMPTIES ANY COINS IN IT BUT DOES NOT PAY

OUT THE TICKETS. THE SAME ACTION HAPPENS IF THE GAME IS TILTED. THE TILT BOB

IS LOCATED ON THE LEFT INSIDE CABINET. THERE IS A TIMER BUILT INTO THE

SOFTWARE THAT ONLY ALLOWS TICKETS TO BE PAID OUT AFTER VERIFYING THAT A

COIN WENT THROUGH THE COIN MECH.

VER. 01.2

GAMEPLAY

GAME DESCRIPTION

WHEEL DEAL USES ACOIN COMPARATOR. A SAMPLE COIN MUST BE INSERTED AND LEFT IN

THE MECH AS SHOWN BELOW. WHEN THE PLAYER INSERTS ACOIN FOR GAMEPLAY, THE MASS

OF THE COIN IS MEASURED AGAINST THE SAMPLE COIN AND IS ACCEPTED OR REJECTED.

THE COIN MECH SWITCH ON THE SIDE MUST BE SET TO N.O.(NORMALLY OPEN), NOT N.C.

(NORMALLY CLOSED).

THE PULSE TIME 3 POSITION SWITCH SHOULD BE SET AT THE SHORTEST PULSE TIME.

THERE IS A SENSITIVITY ADJUSTMENT ON THE SIDE OF THE MECH. STRICT MAKES

THE MECH MORE DISCREET,(WILL REJECT MORE COINS IF THEY ARE NOT PERFECT).

SLACK MAKES THE MECH NOT SO DIFFICULT ABOUT THE COINS IT WILL ACCEPT.

COIN MECH SETUP

OPTO SENSOR

HOPPER

COIN CHUTE METAL COIN PLATE

COIN CHUTE DESCRIPTION

WHEN COINS FALLS OFF THE PLAYFIELD, THEY SLIDES DOWN THE COIN CHUTE. IT THEN

HITS THE METAL COIN PLATE WHICH ACTIVATES THE OPTO SENSOR. WHEN THE OPTO

SENSOR IT ACTIVATED, IT STARTS THE HOPPER. THE HOPPER WILL CONTINUE TO RUN

UNTIL THERE ARE NO MORE COINS IN IT. AT THIS POINT THE APPROPRIATE AMOUNT OF

TICKETS ARE PAID OUT.

THERE IS A LED ON THE BACK OF THE OPTO SENSOR. TO CHECK THAT THE SWITCH AND

OPTO ARE WORKING PROPERLY: HIT THE METAL COIN PLATE WITH YOUR HAND AND

OBSERVE THE LED ON THE BACK OF THE OPTO SENSOR.

PLAYFIELD

MARQUEES

LOCK HOLES

BULBS

POWER BUTTON

INCADESCENT BULB

FLOURESCENT AND INCANDESCENT LIGHTS

TO REPLACE THE FLOURESCENT LIGHT IN A GOLD ZONE:

1. REMOVE THE 2 6-32 ACORN NUTS AND THE TOP METAL PLATE ON THE TOP OF THE

GAME.

2. REPLACE THE BULBS.

3. REPLACE THE TOP PLATE WITH THE ACORN NUTS.

NOTE: THE FLOURESCENT LIGHTS ARE 100 WATT SPIRAL FLOURESCENT BULBS AVAILABLE AT

MOST HARDWARE STORES.

TO REPLACE INCANDESCENT BULB: NOTE: THE INCANDESCENT BULBS ARE 60 WATT FLOOD LIGHTS.

1. UNSCREW BULB AND REPLACE WITH SAME TYPE.

6-32 STUDS

6-32 ACORN NUTS

TOP METAL PLATE

lower spindle

assembly

coin chutes

Jackpot holes

6-32 bolt and fibre nut

lower coin ramp

coin pointer

PLAYFIELD ASSEMBLY AND ADJUSTMENTS

IF YOUR COINS ARE GOING UNDERNEATH THE COIN

POINTER BEFORE THEY GET TO THE END OF THE POINTER, OR IF YOUR ROTATING

PLAYFIELD IS GETTING SCRATCHED IN A CIRCULAR PATTERN, YOU MAY NEED TO

ADJUST THE COIN POINTER HEIGHT.

HOW TO ADJUST:

1. OPEN THE WOOD FRONT DOOR AND LOCATE THE 6-32 BOLT AND FIBER NUT

HOLDING THE RED PLASTIC COIN POINTER TO THE METAL BRACKET.

2. LOOSEN THE NUTAND PLACE A.012 FEELER GAUGE IN BETWEEN THE COIN

POINTER AND THE ROTATING PLAYFIELD AND TIGHTEN THE NUT.

3. CHECK THE CLEARANCE AT DIFFERENT POINT ALONG THE COIN POINTER TO

MAKE SURE IT HAS EVEN CLEARANCE. RECLEARANCE AS NECESSARY.

rotating playfield upper spindle assembly

upper coin ramp

Altri manuali Benchmark Games Macchina per videogiochi arcade

Benchmark Games

Benchmark Games Ticket Station Manuale utente

Benchmark Games

Benchmark Games Acme Crane Company Manuale utente

Benchmark Games

Benchmark Games WHITE HOT 100MAN001 Manuale utente

Benchmark Games

Benchmark Games MONSTER DROP X-TREME Manuale utente

Benchmark Games

Benchmark Games Tickets To Prizes Manuale utente

Benchmark Games

Benchmark Games Fire & Ice X-Treme Manuale utente

Benchmark Games

Benchmark Games Red Hot X-Treme 7s Manuale utente

Benchmark Games

Benchmark Games SLAM-A-WINNER X-TREME Manuale utente

Benchmark Games

Benchmark Games Monster Drop Chaos Manuale utente

Benchmark Games

Benchmark Games BLASTER Manuale utente

Manuali Macchina per videogiochi arcade popolari di altre marche

Universal Space

Universal Space COCONUT BASH Manuale utente

Bay-Tek

Bay-Tek EVOLVE Manuale utente

Global VR

Global VR America's Army Istruzioni per l'installazione e il funzionamento

Atronic

Atronic Cashline Manuale utente

Universal Space

Universal Space Checky Monkey Manuale utente

Bay-Tek

Bay-Tek Skee Ball 1908 Alley Manuale utente

Aristocrat Technologies

Aristocrat Technologies Mars X Upright Manuale utente

Family Fun Companies

Family Fun Companies Reactor Guida rapida

Universal Space

Universal Space FRUIT MANIA Extreme Manuale utente

falgas

falgas CARRUSEL FIESTA Manuale utente

Konami

Konami DanceDanceRevolution Manuale utente

Bay-Tek

Bay-Tek quik drop Manuale utente

Bandai Namco

Bandai Namco PAC-MAN BATTLE ROYALE CHOMPIONSHIP DELUXE Manuale utente

Adrenaline

Adrenaline Flying Tickets Istruzioni per l'installazione e il funzionamento

Swinks

Swinks Stern Pinball Ghostbusters Manuale utente

Innovative Concepts in Entertainment

Innovative Concepts in Entertainment MONOPOLY ROLL-N-GO Manuale utente

jakar

jakar SPEED CARS Manuale utente

Carmelli

Carmelli HAT TRICK NG1015H Manuale utente