TOOLSPECIFICWARNINGS
Keep hands and other parts of the body away from the firing
head during use. Keep hands, feet, and all other parts of the
body at least 8"(20 cm) away from the firing head. Nails or
objects in the workpiece can cause serious injury if they are
deflected by the workpiece or if they are driven away from the
point of entry.
Do not overload the too. Allow the tool to operate at its
optimum speed for maximum efficiency.
Disconnect the tool from the air supply and turn off the
compressor before performing any maintenance, loading, or
changing nails. when the tool is not in use, when it is being
handed to another person, when it is left unattended.
Failure to comply may result in injury or damage to the
equipment.
Do not keep the tool pressed while loading fasteners.
Do not disconnect or reconnect the air hose with the tool
pressed or with a fastener in the guide. The tool may fire when
it is reconnected to the air supply.
Do not drive a fastener on top of a fastener. The fastener
may ricochet, causing serious personal injury.
Use only fasteners of the proper size and gauge as specified
in this manual.
Do not drive fasteners close to the edge of the workpiece.
The workpiece may split which could allow the fastener to fly
free or ricochet.
