Benchmark 2.2AMP VS 1/3 Manuale utente

WEAR CSA APPROVED

EYE PROTECTION

WEAR EAR

PROTECTION

WEAR A

FACE MASK

1/3 SHEET SANDER

5 year limited warranty on tool

JD2642U

PRODUCT SPECIFICATIONS

BENCHMARK 2.2AMP VS 1/3 SHEET SANDER

Rating 120 V, 60 Hz AC

Amperes 2.2 A

Speed 6,000-12,000 OPM (no load)

Sanding pad size 1/3 sheet 3-1/2" x 7-3/8" (90 x 187mm)

Weight 4.6 Lb. (2.1Kg)

NEED ASSISTANCE?

Call us on our toll- free customer support line:

1-866-349-8665 (Monday through Friday 9am – 5pm Eastern Standard Time)

• Technical questions

• Replacement parts

• Parts missing from package

1262-302

1/3 SHEET SANDER

TABLE OF CONTENTS

Product Speciﬁcations .................................................................................. 1

Table of Contents .......................................................................................... 2

General Safety Warnings ............................................................................ 3-5

Speciﬁc Safety Rules ..................................................................................... 6

Guidelines for Extension Cords ...................................................................... 7

Symbols ........................................................................................................ 8

Know your Sheet Sander ............................................................................... 9

Assembly and Operating ........................................................................ 10-13

Maintenance ............................................................................................... 14

Exploded View ............................................................................................ 15

Parts List ............................................................................................... 16-17

Warranty ..................................................................................................... 18

GENERAL SAFETY WARNINGS

WARNING:

Before using this tool or any of its accessories, read this manual and follow all Safety

Rules and Operating Instructions. The important precautions, safeguards and

instructions appearing in this manual are not meant to cover all possible situations.

It must be understood that common sense and caution are factors which cannot be

built into the product.

SYMBOL MEANING

ALWAYS WEAR EYE PROTECTION THAT CONFORMS WITH CSA

Z94.3 or ANSI SAFETY STANDARD Z87.1

FLYING DEBRIS can cause permanent eye damage. Prescription

eyeglasses ARE NOT a replacement for proper eye protection.

Non-compliant eyewear can cause serious injury if broken during

the operation of a power tool.

Use hearing protection, particularly during extended periods of

operation of the tool, or if the operation is noisy.

WEAR A DUST MASK THAT IS DESIGNED TO BE USED WHEN

OPERATING A POWER TOOL IN A DUSTY ENVIRONMENT.

Dust that is created by power sanding, sawing, grinding,drilling, and

other construction activities may contain chemicals that are known to

cause cancer, birth defects, or other genetic abnormalities.

These chemicals include:

• Lead from lead-based paints

• Crystalline silica from bricks, cement, and other masonry products

• Arsenic and chromium from chemically treated lumber

The level of risk from exposure to these chemicals varies, according to

how often this type of work is performed. In order to reduce exposure

to these chemicals, work in a well-ventilated area, and use approved

safety equipment, such as a dust mask that is speciﬁcally designed to

ﬁlter out microscopic particles.

ELECTRICAL SAFETY

WARNING:

To avoid electrical hazards, ﬁre hazards or damage to the tool, use proper circuit

protection.

This tool is wired at the factory for 120V AC operation. It must be connected to a

120V AC, 15 A circuit that is protected by a time-delayed fuse or circuit breaker. To

avoid shock or ﬁre, replace power cord immediately if it is worn, cut or damaged in

any way.

1262-302

1/3 SHEET SANDER

POWER TOOL SAFETY

WARNING:

Read all safety warnings and instructions. Failure to follow the warnings and

instructions may result in electric shock, ﬁre and/or serious injury.

SAVE ALL WARNINGS AND INSTRUCTIONS FOR FUTURE REFERENCE.

WORK AREA SAFETY

Keep work area clean and well lit. Cluttered or dark areas invite accidents.

Do not operate power tools in explosive atmospheres, such as in the presence

of ﬂammable liquids, gases or dust. Power tools create sparks which may ignite

the dust or fumes.

Keep children and bystanders away while operating a power tool. Distractions

can cause you to lose control.

ELECTRICAL SAFETY

Power tool plugs must match the outlet. Never modify the plug in any way. Do

not use any adapter plugs with earthed (grounded) power tools. Unmodiﬁed

plugs and matching outlets will reduce risk of electric shock.

Avoid body contact with earthed or grounded surfaces such as pipes, radiators,

ranges, and refrigerators. There is an increased risk of electric shock if your body

is earthed or grounded.

Do not expose power tools to rain or wet conditions. Water entering a power tool

will increase the risk of electric shock.

Do not abuse the cord. Never use the cord for carrying, pulling, or unplugging

the power tool. Keep cord away from heat, oil, sharp edges or moving parts.

Damaged or entangled cords increase the risk of electric shock.

When operating a power tool outdoors, use an extension cord suitable for

outdoor use. Use of a cord suitable for outdoor use reduces the risk of electric

shock.

If operating a power tool in a damp location is unavoidable, use a residual

current device (RCD) protected supply. Use of a ground fault circuit interrupter

(GFCI) reduces the risk of electric shock.

PERSONAL SAFETY

Stay alert, watch what you are doing and use common sense when operating a

power tool. Do not use a power tool while you are tired or under the inﬂuence

of drugs, alcohol, or medication. A moment of inattention while operating power

tools may result in serious personal injury.

Use personal protective equipment. Always wear eye protection. Protective

equipment such as dust mask, non-skid safety shoes, hard hat, or hearing

protection used for appropriate conditions will reduce personal injuries.

connecting to power source and/or battery pack, picking up or carrying the

tool. Carrying power tools with your ﬁnger on the switch or energizing power tools

that have the switch on invites accidents.

Remove any adjusting key or wrench before turning the power tool on. A wrench

or a key left attached to a rotating part of the power tool may result in personal

injury.

Do not overreach. Keep proper footing and balance at all times. This enables

better control of the power tool in unexpected situations.

Dress properly. Do not wear loose clothing or jewellery. Keep your hair,

clothing, and gloves away from moving parts. Loose clothes, jewellery or long hair

can be caught in moving parts.

If devices are provided for the connection of dust extraction and collection

facilities, ensure these are connected and properly used. Use of dust collection

can reduce dust-related hazards.

POWER TOOL USE AND CARE

Do not force the power tool. Use the correct power tool for your application.

The correct power tool will do the job better and safer at the rate for which it was

designed.

Any power

tool that cannot be controlled with the switch is dangerous and must be repaired.

Disconnect the plug from the power source and/or the battery pack from the

power tool before making any adjustments, changing accessories, or storing

power tools. Such preventive safety measures reduce the risk of starting the power

tool accidentally.

Store idle power tools out of the reach of children and do not allow persons

unfamiliar with the power tool or these instructions to operate the power tool.

Power tools are dangerous in the hands of untrained users.

Maintain power tools. Check for misalignment or binding of moving parts,

operation. If damaged, have the power tool repaired before use. Many accidents

are caused by poorly maintained power tools.

Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp

cutting edges are less likely to bind and are easier to control.

Use the power tool, accessories and tool bits etc. in accordance with these

instructions, taking into account the working conditions and the work to be

performed.

result in a hazardous situation.

SERVICE

Have your power tool serviced by a qualiﬁed repair person using only identical

replacement parts. This will ensure that the safety of the power tool is maintained.

1262-302

1/3 SHEET SANDER

SPECIFIC SAFETY RULES FOR 1/3 SHEET

SANDERS

WARNING:

Know your 1/3 sheet sander. Do not plug in the sander until you have read and

understand this Instruction Manual.

Learn the tool’s applications and limitations, as well as the speciﬁc potential

hazards related to this tool. Following this rule will reduce the risk of electric

shock, ﬁre, or serious injury.

Always wear eye protection. Any power tool can throw foreign objects

into your eyes and cause permanent eye damage. ALWAYS wear

safety goggles (not glasses) that comply with ANSI safety standard

Z87.1.

Everyday glasses have only impact resistant lenses. They ARE NOT safety glasses.

WARNING: Glasses or goggles not in compliance with ANSI Z87.1 could

cause serious injury when they break.

WARNING: Always use a dust mask when sanding.

WARNING: Always use hearing protection when sanding, particularly during

extended periods of operation.

WARNING: Always unplug the tool from the power source before changing

the sandpaper and when cleaning the tool.

Do not wear gloves, neckties or loose clothing.

Secure the workpiece. Use clamps or a vise to hold the work when practical. It is

safer than using your hand and it frees both hands to operate the tool.

Do not sand material too small to be securely held.

Make sure there are no nails or foreign objects in the part of the workpiece to be

sanded.

Always keep hands out of the path of the sanding pad. Avoid awkward hand

positions where a sudden slip could cause your hand to move into the path of the

sanding pad.

To avoid injury from accidental starting, always remove the plug from the power

source before installing or removing sandpaper or the vacuum adaptor.

GUIDELINES FOR EXTENSION CORDS

Make sure your extension cord is the proper size. When using an extension

cord, be sure to use one heavy enough to carry the current the tool will draw. An

undersized cord will cause a drop in line voltage resulting in loss of power and

overheating. The table on at right shows the correct size to use according to cord

length and nameplate ampere rating. If in doubt, use the next heavier gauge. The

smaller the gauge number the heavier the cord.

Be sure your extension cord is properly wired and in good condition. Always

replace a damaged extension cord or have it repaired by a qualiﬁed electrician

before using it. Protect your extension cord from sharp objects, excessive heat and

damp or wet areas.

Use a separate electrical circuit for your power tools. This circuit must not be

less than 14 gauge wire and should be protected with either a 15A time delay fuse

or circuit breaker. Before connecting the power tool to the power source, make sure

the switch is in the OFF position and the power source is the same as indicated on

the nameplate. Running at lower voltage will damage the motor.

WARNING: Repair or replace damaged or worn extension cords

immediately.

Select the appropriate extension cord gauge and length using the chart below.

MINIMUM GAUGE (AWG)

EXTENSION CORDS (120V USE ONLY)

Amperage Rating Total Length

More than Not more

than

25'

(7.5 m)

50'

(15 m)

100'

(7.5 m)

150'

(7.5) m

0 6 18 16 16 14

6 10 18 16 14 12

10 12 16 16 14 12

12 16 14 12 Not Applicable

1262-302

1/3 SHEET SANDER

SYMBOLS

WARNING: Some of the following symbols may appear on the sander . Study these

symbols and learn their meaning. Proper interpretation of these symbols will allow

V Volts

Three-phase alternating

current

A Amperes n

Three-phase alternating

current with neutral

Hz Hertz direct current

W Watts noNo load speed

kW Kilowatts Alternating or direct current

Microfarads Class II construction

L Liters Splash-proof construction

kg Kilograms Watertight construction

H Hours Protective grounding at

terminal, Class I tools

N/cm² Newtons per square

centimetre .../min Revolutions or reciprocations

per minute

Pa Pascals Diameter

OPM Oscillation per minute 0

Min Minutes Directional arrow

S Seconds Warning symbol

~or AC Alternating current Wear safety glasses, hearing

protection and dust mask

This symbol designates that this tool is listed with U.S. and

Canadian requirements by cTUVus Testing Laboratories, Inc.

UL62841-1，UL62841-2-4;

CSA C22.2#62841-1，CSA C22.2#62841-2-4.

JD2642U

KNOW YOUR 1/3 SHEET SANDER

1. Front hand grip

3. Lock-On button

4. Rear handle

5. Power cable

6. dust bag

7. Sandpaper x 9

8. Clamping lever

9. Sandpaper punch/Base protector

10. Variable speed dial

Indice

Altri manuali Benchmark Levigatrice

Benchmark

Benchmark 1262-000 Manuale utente

Benchmark

Benchmark 1262-001 Manuale utente

Benchmark

Benchmark 1262-301 Manuale utente

Benchmark

Benchmark 1282 006 Manuale utente

Benchmark

Benchmark 1262-200 Manuale utente

Manuali Levigatrice popolari di altre marche

Oliver

Oliver 6305 Manuale utente

Jet

Jet 22-44 Pro-3 Manuale di servizio

Makita

Makita M9204 Manuale

Makita

Makita M9204 Manuale utente

Craftsman

Craftsman 351.215131 Manuale utente

Clarke

Clarke Woodworker CBS1-5B Manuale di istruzioni

Chicago Pneumatic

Chicago Pneumatic CP9778 Manuale utente

Nitto Kohki

Nitto Kohki BB-20 Manuale utente

Ferm

Ferm FEOS-135 Manuale utente

Unior

Unior 1510 Manuale utente

stayer

stayer ls1200 Manuale utente

Jet

Jet JSG-96 Manuale di servizio

Parkside

Parkside PDS 290 B2 Manuale utente

Status

Status XPA Series Manuale utente

Clarke

Clarke EZ Sand Manuale utente

Craftsman

Craftsman 113.22521 Manuale utente

Craftsman

Craftsman 113.225831 Manuale utente

CLAS

CLAS OP 1429 Manuale utente