BenQ FP72G+D Manuale utente

Welcome
FP72G+D
LCD Color Monitor
17.0" (43.2 cm) LCD Panel Size
User’s Manual

2
Copyright
Copyright © 2005 by BenQ Corporation. All rights reserved. No part of this publication may be
reproduced, transmitted, transcribed, stored in a retrieval system or translated into any language
or computer language, in any form or by any means, electronic, mechanical, magnetic, optical,
chemical, manual or otherwise, without the prior written permission of BenQ Corporation.
Disclaimer
BenQ Corporation makes no representations or warranties, either expressed or implied, with
respect to the contents hereof and specifically disclaims any warranties, merchantability or fitness
for any particular purpose. Further, BenQ Corporation reserves the right to revise this publication
and to make changes from time to time in the contents hereof without obligation of BenQ
Corporation to notify any person of such revision or changes.
Please follow these safety instructions for best
performance, and long life for your monitor
Power Safety
•The AC plug isolates this equipment from the AC supply.
•The power supply cord serves as a power disconnect device for pluggable equipment. The socket
outlet should be installed near the equipment and be easily accessible.
•This product should be operated from the type of power indicated on the marked label. If you are
not sure of the type of power available, consult your dealer or local power company.
Care And Cleaning
•Cleaning. Always unplug your monitor from the wall outlet before cleaning. Clean the LCD
monitor surface with a lint-free, non-abrasive cloth. Avoid using any liquid, aerosol or glass
cleaners.
•Slots and openings on the back or top of the cabinet are for ventilation. They must not be blocked
or covered. Your monitor should never be placed near or over a radiator or heat source, or in a
built-in installation unless proper ventilation is provided.
•Never push objects or spill liquid of any kind into this product.
Servicing
•Do not attempt to service this product yourself, as opening or removing covers may expose you to
dangerous voltages or other risks. If any of the above mentioned misuse or other accident such as
dropping or mishandling occurs, contact qualified service personnel for servicing.
i
ii
iii
iv
v

3
Table of Contents
Getting started ...................................................................................................................... 4
Getting to know your monitor ............................................................................................5
Front View ...................................................................................................................5
Back View .....................................................................................................................5
How to install your monitor hardware ............................................................................... 6
Viewing Angle Adjustment .........................................................................................8
Portrait Viewing Installation (Optional) ...................................................................9
Storing the Monitor ...................................................................................................11
Getting the most from your BenQ monitor ...................................................................... 12
How to install the monitor on a new computer ......................................................13
How to upgrade the monitor on an existing computer ..........................................14
How to install on Windows XP systems ...................................................................15
How to install on Windows 2000, ME, & 98 systems ..............................................17
How to complete the Windows Upgrade Device Driver Wizard ...........................18
How to adjust the screen resolution .................................................................................. 20
How to adjust the screen refresh rate ................................................................................ 21
How to set the picture optimization .................................................................................. 22
How to adjust your monitor ..............................................................................................23
A Look at the Control Panel .....................................................................................23
Hot Key Mode ...........................................................................................................24
Main Menu Mode ......................................................................................................24
Troubleshooting ................................................................................................................. 32
Frequently Asked Questions (FAQ) .........................................................................32
Need More Help? .......................................................................................................33
Supported operating modes ............................................................................................... 34
Specifications ...................................................................................................................... 35
i

4Getting started
Getting started
When unpacking please check you have the following items. If any are missing or damaged, please
contact the place of purchase for a replacement.
11
1
1
BenQ LCD Monitor
Quick Start Guide
CD-ROM
Power Cord
Signal Cable: D-Sub
Signal Cable: DVI-D
P
/
N
:
5
3
.
L
9
0
0
3
.
0
0
2

5 Getting to know your monitor
Getting to know your monitor
Front View
Back View
1. Power AC input jack
2. Video signal input jack: DVI-D
3. Videp signal input jack: D-Sub
11
1
2

6How to install your monitor hardware
How to install your monitor hardware
If the computer is turned on you must turn it off before continuing.
Do not plug-in or turn-on the power to the monitor until instructed to do so.
1. Unpack the monitor and place the monitor on the
desk as illustrated before you cut the retaining strap.
Please be careful to prevent damage to the monitor.
Placing the screen surface on an object like a stapler
or a mouse will crack the glass or damage the LCD
substrate voiding your warranty. Sliding or scraping
the monitor around on your desk will scratch or
damage the monitor surround and controls.
Protect the monitor and screen by clearing a flat open area
on your desk and placing a soft item like the monitor
packaging bag on the desk for padding.
2. Adjust the viewing angle.
Lift the screen upward and then pull the screen forward
until a clicking sound is heard.
For more information about the adjustment of the view-
ing angle, refer to "Viewing Angle Adjustment".
You should position the monitor and angle the screen
to minimize unwanted reflections from other light
sources.
11
1
3

7 How to install your monitor hardware
3. Connect the video cable.
Connect one end of the DVI-D cable to the monitor
DVI-D socket and the other and to the DVI-D port on
your computer.
The DVI-D format is used for direct digital connection
between source video and digital LCD monitors or
projectors. The digital video signals produce a
superior quality picture than analog video signals.
If you don’t have an appropriate DVI-D port on your
computer, you can use the standard video D-Sub cable.
Connect the plug of the D-Sub cable (at the end without
the ferrite filter) to the monitor D-Sub socket. Connect the
other plug of the D-Sub cable (at the end with the ferrite
filter) to the computer video D-Sub socket.
Tighten all finger screws to prevent the plugs from acci-
dently falling out during use.
4. Connect the power cable to the monitor.
Plug one end of the power cord into the socket labelled
’POWER IN’ on the rear of the monitor. Do not connect
the other end to a power point just yet.

8How to install your monitor hardware
Viewing Angle Adjustment
You may position the screen to the desired angle with -5° to +20° monitor tilt, 342° monitor
swivel, and 72 mm monitor height.
5. Connect-to and turn-on the power.
Plug the other end of the power cord into a power point
and turn it on.
Turn on the monitor by pressing the power button on the
front of the monitor.
Turn on the computer too, and follow the instructions in
Section 4: Getting the most from your BenQ monitor to
install the monitor software.
The power point and plug shown are indicative only,
and may differ from that used in your region.
171
171

9 How to install your monitor hardware
Portrait Viewing Installation (Optional)
Your LCD monitor also supports portrait viewing orientation, allowing you to fit your specific
desktop application without needing to scroll down.
Before rotating the display with a portrait viewing orientation, please install the Pivot software
from the enclosed CD first.
To Install the Pivot software:
1. Execute "START_PIVOT.EXE" from the folder named "Pivot" on the provided CD.
2. Follow the on-screen instructions to install the software.
3. After restarting your system, you will see a Pivot Software Control icon, , appearing in
the system tray. Click on the icon and choose "Rotate 90 degrees", , to pivot the display.
To cancel this action, choose "Rotate 0 degree", .
4. Turn the power off and keep following the steps below.
To rotate the display:
1. Hold the monitor along the bottom and move it
upwards to the maximum extendable position..
The stand should be vertically extended to allow
the monitor to rotate from landscape to portrait
mode.
2. Tilt the display backward till it reaches the first
lock.
To avoid the edge of the LCD display hitting the
monitor base surface while it is being rotated, do
tilt the display as instructed.

10How to install your monitor hardware
3. Rotate the display 90 degrees clockwise.
4. Adjust the monitor to the desired viewing angle.
90
Indice
Altri manuali BenQ Monitor

BenQ
BenQ GL2070 Manuale utente

BenQ
BenQ FP937S Manuale utente

BenQ
BenQ MOBIUZ EX3210R Manuale utente

BenQ
BenQ GW2250 Manuale utente

BenQ
BenQ FP785 Manuale utente

BenQ
BenQ E700T Manuale utente

BenQ
BenQ FP567S Manuale utente

BenQ
BenQ FP51G Manuale utente

BenQ
BenQ V2210 Manuale utente

BenQ
BenQ E2420HDP Manuale utente

BenQ
BenQ TXY11 Manuale utente

BenQ
BenQ QuicKit Manuale utente

BenQ
BenQ G2420HDB Manuale utente

BenQ
BenQ G Series Manuale utente

BenQ
BenQ E2000W Manuale utente

BenQ
BenQ FP553 Istruzioni per l'installazione

BenQ
BenQ BL2201M Manuale utente

BenQ
BenQ SH3741 Istruzioni operative

BenQ
BenQ P Series Manuale utente

BenQ
BenQ FP731 - 17" LCD Monitor Manuale utente





















