BenQ PD3200U Istruzioni operative

TROUBLESHOOTING

Why did my monitor not pick up the input

signal automatically?

Most of BenQ monitors have the “Input Auto Switch” option.

By enabling “Input Auto Switch”, your monitor automatically chooses the best active input

source based on all the input devices currently connected to the monitor. For example, if your

monitor is connected only through HDMI, it will set the input source to HDMI automatically. If

your monitor is connected through both VGA and HDMI, it will set the input source to HDMI

(which has higher priority than VGA).

Please refer to the User Manual of your BenQ monitor for detailed instructions on how to use

“Input Auto Switch”.

There is no sound coming out from my LCD

monitor speaker.

Please check how your BenQ Monitors is connected to the PC. The audio can be transferred

through an HDMI or an audio cable.

My monitor is showing ghosting image (i.e.

when scrolling the text or moving the mouse),

how can I fix this problem?

Please turn OFF the AMA function in the OSD menu

My BenQ monitor doesn't turn on.

Please check if the cable is correctly connected to the power source and try to change the power

cable. If the problem persists, please contact technical support.

The image on my monitor is flickering, how

to fix this problem?

Please try to adjust the refresh rate on your graphic card to an higher level, like 70Hz. This may

solve the problem. If the problem persist, please contact BenQ technical support.

My BenQ monitor does not display any

image when a D-SUB (VGA) cable is

connected.

Please check if the right input source is selected in your Monitors, check the connection cable. If

the problem persist, please contact BenQ Technical support.

I recently purchased a BenQ monitor and

have been trying to connect it to my notebook

with an HDMI cable. But I keep getting a

message "No Cable Connected" on the

monitor. What suggestion can you provide to

me for solving this problem?

Please follow the suggested steps as below and you could choose one of them to adjust the

setting of input sources.

1. Hot key - Input Select

2. OSD - Input Select: Press this to change the input to that appropriate to your video cable

connection type.

3. OSD - HDMI auto switch: The default setting is off, and you can turn it as on.

When this function is activated, HDMI or HDMI / MHL port will be in the input auto select

loop. Otherwise, HDMI or HDMI / MHL can only be selected by input select.

Indice

Manuali Monitor popolari di altre marche

Linear Acoustic

Linear Acoustic LQ-1000 Manuale utente

AOC

AOC I2579V Manuale utente

Gateway

Gateway FPD1520 Manuale utente

Furuno

Furuno Mu 120c Manuale utente

Asus

Asus VB171D - 17" LCD Monitor Manuale utente

Dell

Dell S2230MX Istruzioni utente

Philips

Philips 107C64 Manuale utente

Dell

Dell S2409WFP Manuale utente

EverFocus

EverFocus EN-7517E Manuale utente

Panasonic

Panasonic TH152UX1 - 152" PLASMA TV Manuale utente

Dell

Dell Precision 7680 Manuale di istruzioni

LG

LG 50PM1M - - 50" Plasma Panel Manuale utente

Bosch

Bosch DDU 9 Manuale utente

Acer

Acer A231HL Manuale utente

Philips

Philips 86BDL4152T Manuale utente

NEC

NEC AccuSync LCD5V Manuale utente

Emay

Emay SleepO2 Manuale utente

IBM

IBM 6360 Istruzioni per l'installazione