Bentone B 30A Specifiche tecniche

Providing sustainable energy solutions worldwide

178 122 51-1 2019-08-15

Installation- and maintenance instruction

B 30A

2Bentone

3Bentone

General

Table of contents

1. General Information___________________________________ 4

2. Technical data________________________________________ 7

2.1 Dimensions B 30___________________________________ 7

2.2 Dimensions ﬂange__________________________________ 7

2.3 Working ﬁeld B 30 _________________________________ 8

2.4 Setting of brake plate and air ﬂow ____________________ 9

2.5 Recommended nozzle and pressure __________________ 9

2.6 Burner installation __________________________________ 9

2.7 Nozzle table______________________________________10

2.8 Description B 30 __________________________________12

3. General instructions _________________________________13

3.1 General rules _____________________________________13

4. Installation _________________________________________14

4.1 Handling and lifting instruktion ______________________14

4.2 Acceptance inspection_____________________________15

4.3 Preparations for installation _________________________15

4.4 Distribution of oil __________________________________15

4.5 Electrical connection_______________________________15

4.6 Mount the burner on the boiler ______________________16

4.7 Check oil line seals ________________________________16

4.8 Air setting________________________________________17

4.9 Nozzle assembly adjustment, brake plate _____________17

5. Burner installation ___________________________________18

5.1 Examples of basic setting B 30______________________18

5.2 Setting values for nozzle assembly B 30 ______________19

5.3 Setting values for air damper B 30 ___________________19

6. Burner servicing _____________________________________20

6.1 Servicing the combustion assembly _________________20

6.2 Servicing air dampers _____________________________21

6.3 Servicing the fan __________________________________22

6.4 Replacement of oil pump___________________________23

6.5 Vibration_________________________________________24

7. Instructions Pump ___________________________________25

7.1 SUNTEC AS _____________________________________25

8. Replacement of electrical components ________________31

9. Oil burner control ____________________________________32

9.1 Wiring diagram LOA 21... / LOA24... _______________32

9.2 List of components________________________________33

10. Fault Location _____________________________________34

10.1 Burner will not start________________________________34

10.2 Burner will not start after normal use _________________ 34

10.3 Delayed ignition___________________________________35

10.4 Noise in pump ____________________________________35

10.5 Pump pressure ___________________________________35

11. Log of ﬂue gas analysis_____________________________36

12. Oil burners maintenance instructions ________________37

4Bentone

1. General Information

This Installation and Maintenance manual:

• is to be regarded as part of the burner and must always be kept near

the installation site

• is intended for use by authorised personnel

• must be read prior to installation

• must be observed by all who work with the burner and associated

system components

• work with the burner may only be carried out by certiﬁed installers/

personnel

• Enertech AB is not liable for any typographical errors and reserves the

right to make design changes without prior notice.

• The burner may only be used for its intended purpose in accordance

with the product’s technical data.

• The burner may only be installed and operated by authorised

personnel.

• The product is packaged to prevent damage from occurring during

handling. Handle the product with care. Lifting equipment must be

used to lift larger packages.

• The products must be transported/stored on a level surface in a dry

environment, max. 80% relative humidity, no condensation.

Temperature -20 to +60 °C.

• Check that the burner is compatible with the boiler’s output range.

• The label information on the rating plate refers to the burner’s minimum

and maximum power.

• The power data on the type sign refers to the burner’s min. and max.

power.

• All components must be installed without being bent, twisted or

subjected to mechanical or thermal forces which can affect the

components.

• The burner must be installed so that it complies with local regulations

for ﬁre safety, electrical safety, and fuel distribution.

• Make sure when installing the equipment that there is enough space to

service the burner.

• Permitted ambient temperature during operation -0 to +60 °C. Max

80% relative humidity, no condensation.

• The installer must ensure that the room has adequate air supply.

• The room must comply with local regulations pertaining to its intended

use.

• The installation site must be free of chemicals.

• Burner pipes, fan wheels and air dampers may contain sharp edges.

• The surface temperature of the burner’s components can exceed 60

°C.

• Caution: The burner has moving parts, and there is risk of crushing

injuries.

165 105 01

5Bentone

• The electrical installation must be professionally carried out in

accordance with applicable high voltage regulations, as per Enertech’s

recommendations.

• Before servicing, shut off the fuel supply and turn off the power to the

burner.

• Leak checks must be performed during installation and servicing to

prevent fuel leakage.

• Care should be taken by the installer to ensure that no electrical cables

or fuel lines are crushed or otherwise damaged during installation or

servicing.

• If the boiler is equipped with an access hatch, this must be equipped

with a hatch opening switch connected to the burner's safety system.

• When in operation, the burner’s noise level can exceed 85 dBA.

Use hearing protection.

• The burner must not be put into operation without proper safety and

protection devices.

• A Class BE ﬁre extinguisher is recommended.

• It is forbidden to alter thedesign or use accessories which have not

been approved by Enertech in writing.

• Prior to operation, the following points must be checked:

-ﬁtting and installation work has been completed and approved

-electrical installation has been correctly performed

-ﬂue gas ducts and combustion air ducts are not blocked

-all actuators and control and safety devices are in working order and

correctly set

6Bentone

Components Service life – Recommended

replacement

Service life – Recommended

replacement Operating cycles

Control system 10 years 250,000 cycles

Pressure switch 10 years 250,000 cycles

Flame guard 10 years 250,000 cycles

UV ﬂame sensor 10000 hrs N/A

Damper motor 500 000 cycles

Contaktor 10 years 500,000 cycles

Burner 1 year 3000 hrs

Filter 1 year 3000 h Change

Oilhose 1 year control/change

Nozzle 1 year change 3000h Change

Electrods 1 Year Change /cleaning 3000h Change /cleaning

Brake plate 1 Year Change /cleaning 3000h Change /cleaning

Motor 1 year 3000 hrs

Cuppling chaft 1 year control/change 3000h control/change

Fan wheel “1 Year Change when dirty /

unbalance”

“3000h Change when dirty /

unbalance”

The burner and its components must be recycled according to applicable regulations.

Burner servicing schedule

Servicing must be carried out once a year or after 3000 hours of operation

Component replacement intervals

Delivery check

• Make sure everything is delivered and the goods have not been

damaged during transit.

• If something is wrong with a delivery, report it to the supplier.

• Transport damage must be reported to the shipping company.

7Bentone

165 105 22

2. Technical data

The burner is intended for:

• Light oil, B10 heating oil/biofuel blend (as deﬁned in DIN V51603-6)

and is used for:

• Water heating generators

• Hot air generators (these require LMO 24 255 C2E)

2.1 Dimensions B 30

* Min. recommended distance to ﬂoor.

A Ø B Ø C D E F G H I * J

B 30 187/315 108 108 372 220 281 303 188 415 200

2.2 Dimensions ﬂange

ø108

160-190

øB

øC

8Bentone

Type Motor Complete

burner

Sound

B 30 180W 1,3A 230V

50Hz 5µF

230V 2,5A

50Hz

84 dBA ± 0,5

dBA

2.3 Working ﬁeld B 30

6,0-17,0 kg/h

72-200 kW

2.3.1 Electric Speciﬁcation

Burner correspond to IP 20

-1

70 80 90 100 110 120 130 140 150 160 170 180 190 200 210

mbar

9Bentone

Nozzle: 45° Solid/semisolid

60° Solid/semisolid

80° Solid/semisolid

Pump pressure 10 bar (8-25 bar)

Combustion

device

d1d2d3

B 30 ø 110 M10 ø 160-200

Because of the various boiler types with varying furnace geometries and

furnace loads, it is impossible to commit to a certain scattering angle or a

speciﬁc distribution pattern.

It should be noted that the scattering angle and distribution pattern changes

with pump pressure.

!*NB It is important that

the spark does not strike

against the brake plate or

nozzle

a b c d

B30 2.5-3.5 7,0-9,0 1.0-2.0 5.0-6.0





2.4 Setting of brake plate and air ﬂow

2.5 Recommended nozzle and

pressure

2.6 Burner installation

2.6.1 Hole patten

Make sure the hole pattern on the boiler is designed for burner ﬂange.

10 Bentone

2.7 Nozzle table Pump pressure bar

Gph 9 11

kg/h kW Mcal/h kg/h kW Mcal/h

0,85 3,00 36 31 3,32 39 34

1,00 3,53 42 36 3,90 46 40

1,10 3,88 46 39 4,29 51 44

1,20 4,24 50 43 4,68 55 48

1,25 4,40 52 45 4,88 58 50

1,35 4,76 56 48 5,27 62 54

1,50 5,29 63 54 5,85 69 60

1,65 5,82 69 59 6,44 76 66

1,75 6,18 73 63 6,83 81 70

2,00 7,06 84 72 7,81 93 80

2,25 7,94 94 81 8,78 104 89

2,50 8,82 105 90 9,76 116 99

2,75 9,71 115 99 10,73 127 109

3,00 10,59 126 108 11,71 139 119

3,50 12,35 146 126 13,66 162 139

4,00 14,12 167 144 15,62 185 159

4,50 15,88 188 162 17,57 208 179

5,00 17,65 209 180 19,52 231 199

5,50 19,42 230 198 21,47 255 219

6,00 21,18 251 216 23,42 278 239

6,50 22,94 272 234 25,37 301 259

7,00 24,71 293 252 27,33 324 279

7,50 26,47 314 270 29,28 347 298

8,00 28,24 335 288 31,23 370 318

8,50 30,00 356 306 33,18 393 338

9,00 31,77 377 324 35,14 417 358

kg/h kW Mcal/h

3,61 43 37

4,24 50 43

4,67 55 48

5,09 60 52

5,30 63 54

5,73 68 58

6,36 75 65

7,00 83 71

7,42 88 76

8,49 101 86

9,55 113 97

10,61 126 108

11,67 138 119

12,73 151 130

14,85 176 151

16,97 201 173

19,10 226 195

21,22 251 216

23,34 277 238

25,46 302 260

27,58 327 281

29,70 352 303

31,83 377 324

33,95 403 346

36,07 428 368

38,19 453 389

kg/h kW Mcal/h

3,87 46 39

4,56 54 46

5,01 59 51

5,47 65 56

5,70 68 58

6,15 73 63

6,83 81 70

7,52 89 77

7,97 94 81

9,12 108 93

10,26 122 105

11,39 135 116

12,53 148 128

13,67 162 139

15,95 189 163

18,23 216 186

20,51 243 209

22,79 270 232

25,07 297 256

27,49 326 280

29,63 351 302

31,91 378 325

34,19 405 349

36,47 432 372

38,74 459 395

41,02 486 418

The table applies to oil with a viscosity of 4.4 mm 2/s at a density of 830 kg/m 3..

Altri manuali per B 30A

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Bentone Bruciatore

Bentone

Bentone bg 300 Specifiche tecniche

Bentone

Bentone BG650-2 Specifiche tecniche

Bentone

Bentone B45-2 RME Specifiche tecniche

Bentone

Bentone BG 400 M J Specifiche tecniche

Bentone

Bentone 45 A2.2 Specifiche tecniche

Bentone

Bentone Bentoflex ST 133 KL Specifiche tecniche

Bentone

Bentone BG 300LN Specifiche tecniche

Bentone

Bentone B40 MF Specifiche tecniche

Bentone

Bentone BG550 Series Specifiche tecniche

Bentone

Bentone B 40 A Specifiche tecniche

Bentone

Bentone BG 450 LN Specifiche tecniche

Bentone

Bentone BG 450 LN Specifiche tecniche

Bentone

Bentone BG 400-2 Biogas Specifiche tecniche

Bentone

Bentone BG 550 M LN Specifiche tecniche

Bentone

Bentone BG 400 Specifiche tecniche

Bentone

Bentone BG 650i M Specifiche tecniche

Bentone

Bentone BG 450 M Specifiche tecniche

Bentone

Bentone BF 1 KS Specifiche tecniche

Bentone

Bentone B 40 A Specifiche tecniche

Bentone

Bentone B 55-3R Specifiche tecniche

Bentone

Bentone B10E Manuale utente

Bentone

Bentone BG400M Manuale utente

Bentone

Bentone ST 120 R Specifiche tecniche

Bentone

Bentone B45-2 MF Specifiche tecniche

Manuali Bruciatore popolari di altre marche

Riello

Riello RS 28/M Guida rapida

True Induction

True Induction TI4B Manuale utente

Weishaupt

Weishaupt WG20 Series Manuale utente

Carolina Cooker

Carolina Cooker M116672 Manuale utente

Riello

Riello RX 500 S/PV Manuale di istruzioni

Unigas

Unigas HTP2000 Manuale utente

baltur

baltur BT 250 DSG 4T Manuale utente

muenkel design

muenkel design round burner Manuale utente

Ecoflam

Ecoflam Multicalor 170.1 Manuale utente

baltur

baltur BT 14 DSGW Manuale utente

artisan

artisan Art-SB1 Guida

Riello

Riello P 140 T/G Guida rapida

AESYS

AESYS TurboFire II Manuale utente

Riello

Riello RG1RKD Guida rapida

IKEA

IKEA GRILLSKÄR Manuale utente

RUSTA

RUSTA SAREK Manuale utente

PROPOINT

PROPOINT 8933657 Manuale utente

baltur

baltur TBL 1000 ME Manuale di riferimento