3Bentone
General
Table of contents
1. General Information __________________________________ 4
2. Technical data B 40A2,2 ______________________________ 8
2.1 Dimensions B 40__________________________________ 8
2.2 Working field B 40 A2,2 ___________________________ 9
2.4 Recommended nozzle and pressure ________________ 10
2.5 Burner installation ________________________________ 10
2.3 Setting of brake plate and air flow __________________ 10
2.6 Nozzle table_____________________________________ 11
2.7 Description B 40 _________________________________ 13
3. General instructions _________________________________ 14
3.1 General rules ____________________________________ 14
4. Installation _________________________________________ 15
4.1 Handling and lifting instruktion _____________________ 15
4.2 Acceptance inspection____________________________ 16
4.3 Preparations for installation ________________________ 16
4.4 Distribution of oil _________________________________ 16
4.5 Electrical connection______________________________ 16
4.6 Mount the burner on the boiler _____________________ 17
4.7 Check oil line seals _______________________________ 17
4.8 Air adjustment with damper motor __________________ 18
4.9 Examples of basic setting B 40A2,2_________________ 19
4.10 Setting values for nozzle assembly
and air damper B 40 _________________________ 20
5. Burner servicing ____________________________________ 21
5.1 Servicing the combustion assembly ________________ 21
5.2 Servicing air dampers ____________________________ 22
5.3 Replacement of damper motor _____________________ 23
5.4 Servicing the fan _________________________________ 24
5.5 Replacement of oil pump__________________________ 25
5.6 Check oil line seals _______________________________ 26
5.7 Solenoid valve seal test ___________________________ 26
6. Instructions Pump __________________________________ 27
6.1 SUNTEC D(V) 57C _______________________________ 27
7. Replacement of electrical components ________________ 33
8. Oil burner control ___________________________________ 34
8.1 Wiring diagram _________________________________ 34
8.2 List of components_______________________________ 35
8.3 Colour codes LMO14/24 __________________________ 36
8.4 Fault codes LMO14/24 ___________________________ 36
9. Fault Location ______________________________________ 37
9.1 Burner will not start_______________________________ 37
9.2 Burner will not start after normal use ________________ 37
9.3 Delayed ignition__________________________________ 38
9.4 Noise in pump ___________________________________ 38
9.5 Pump pressure __________________________________ 38
10. Log of flue gas analysis____________________________ 40
11. Oil burners maintenance instructions _______________ 41
