4.2 Power on and power off
Insert power adaptor and press [I/O] to turn on indicator with AC power. Switch
on battery button and press [I/O] to power on indicator with DC power. After the
indicator is turned on, it will firstly display “ b1” then a version number, and then
automatically excute the self checking from " 9" to " 0" successively. If its wire con-
nection is correct and zero position is normal, the indicator will display “ 0”.
In power-on state, press [I/O] to turn it off directly.
4.3 Digit Input
Under setting or calibrating state, the digit input is all fulfilled via[ ] and[ ] in
cooperating. [] is place- shifting key, it is used for selecting the place of the digit
successively, and the selected digit will flash.At this time if pressing[] successively,
the flashing digit will increase in" 0=1 2=9=0" sequence.
For example: to input " 001500"Iwhilst the display of the indicator is “030000”
, the digit input steps are as follows:
Step 1: Press[ =] once to make the indicator display 00000”0”, the digit at the last
right place flashes.
Step 2: Press[=] once, the second digit flashes and 0000“0”0 is displayed.
Step 3: Press[=] once, the third digit flashes and 000“0”00 is displayed.
Step 4: Press[ ] five times, the indicator displays 000“5”00 and " 5" flashes.
Step 5: Press[ ] once, the fourth digit flashes and 00“0”500is displayed.
Step 6: Press[ ] once, the indicator displays 00“1”500 and "1" flashes.
Step 7: Press [ENTER] to confirm, thus the input operation for a group of digit is
completed.
4.4 Modes converting
This indicator has two working modes of “weighing” and “counting”.
After power on, it will automatically select weighing mode. Press[ MODE] and
[ ] at the same time to make the mode of the indicator converting between
“weighing” and “counting”.
4.4.1 Weighing mode
Under weighing mode, the indicator has such basic functions as zero, tare, total
ization and so on.
a. Totalizing times and weight
Under weighing mode, carry through totalize by pressing [M+], Max. toalizing
times for the indicator can reach 100 times, when it exceeds 100 times, the operation
6
