Bercomac 700525-2 Manuale utente

106078 L-03

Instructions

CAB FOR WALK-BEHIND SNOWBLOWERS #700525-2

INSTALLATION

PRE INSTALLATION:

NOTE: Some standard pre assembly has been done (the most commonly used) to facilitate installation. Certain

models of walk behind snowblowers have accessories attached on the handle bar that come into interference

with the cab’s right adjustable support assembly.

Please follow the instructions that are in the hardware bag. Refer to the parts breakdown for identification of the

parts.

Determine the location of the left and right adjustable support assemblies that will adapt the best on your

snowblower. Several possibilities are offered, they are not all illustrated.

About twelve positions are possible and are adjustable in different ways. The link can be inverted which will allow

even more positions.

The right & left adjustable supports can be moved from one side to the other, the inside and outside attaching

plates can be inverted on either the vertical and horizontal handles, which will give a greater quantity of

positions.

The inside and outside attaching plates were designed to accept different sizes of snowblower handles.

Determine the installation that is necessary for your snowblower. Position the carriage bolts as close as possible

to the handles of the snowblower.

106078 L-03

ASSEMBLY

INSTALLATION:

Remove the flange nuts M8 (item 1) and the

carriage bolts M8 x 65mm (item 2) from the right

and left adjustable support assemblies (item 3).

This will allow you to remove the 13mm tools (item

4) that you will use during the rest of the installation.

Place in a satisfactory and temporary position the

right (item 1) and left (item 2) adjustable support

assembly on the handles of the snowblower as

determined previously with the nuts and bolts

previously removed.

Tighten the nuts lightly (item 3).

This will allow you to freely adjust the assembly in the

following steps.

Install the adjustable support assemblies.

Insert the right pipe assembly (item1) and the left pipe

assembly (item 2) in the adjustable support

assemblies (item 3) as shown.

Install the left and right pipe assemblies.

Insert the central pipe (item 1) between the pipe

assemblies (items 2 & 3) as shown.

Make sure the central pipe is well inserted in the snap

in buttons .

Install the central pipe

Install the assembled extensions

Insert the assembled extensions (item 1) in the right

and left pipe assemblies (item 2) up to the pressure

buttons as shown.

Remove the nuts and bolts.

106078 L-03

ASSEMBLY

Place your assembly in the middle of the snowblower.

Position it so that it is parallel with ground in both

directions; front (View A) and the side (View B).

Tighten all the bolts and nuts firmly.

Place the mounting parallel with the ground

Insert the eight vertical rods (item 1) (all the same

length) on the assembly (item 2) as shown.

Insert the eight vertical rods

Install the corners

Insert the corners A, B, C. D, (identified with a letter)

on the vertical rods (item 1).

106078 L-03

ASSEMBLY

Install the two lateral rods (item 1) (the two shortest

ones) in the corners (item 2) as shown.

Install the lateral rods

Install the front and back rods

Install the front & back top rods (item 1) (in the

corners (item 2) as shown.

Install the canvas (item 1) on the cab assembly, make

sure the back panels (item 2) are over the back top

rod.

Hang the canvas and hold in place with the Velcro

straps at the base of the canvas and at the back.

Install the canvas

106078 L-03

ASSEMBLY

You can change the windows panels.

The canvas is preassembled with a removable

window panel (long panel).

If the snowblower is equipped with headlights,

handles or other accessories, remove the long

window panel (item 1) from the window.

You can use the three panels (items 2,3 & 4)

according to your needs.

NOTE: Make sure that you do not block the

engine air-intake and that the emanations do not

enter the cab when the canvas is tied down in

place.

106078 L-03

PARTS BREAKDOWN

CAB FOR WALK BEHIND SNOWBLOWER

106078 L-03

PARTS LIST

CAB FOR WALK BEHIND SNOWBLOWER

Ref.

Réf. English description Description française Qty.

Qté.

Part #

Pièce #

1Central pipe Tube central 1105450

2Left pipe Tube gauche 1105451

3Right pipe Tube droit 1105452

4Extension Extension 2105453

5Bushing Coussinet 2105454

6Lateral rod Tige latérale 2105455

7Top rod Tige du haut 2105456

8Left adjustable support Support ajustable gauche 1105457

9Right adjustable support Support ajustable droit 1105458

10 Base adjustable support Support de la base ajustable 2105459

11 Link Lien 2105460

12 Outside mounting plate Plaque de montage extérieure 2105461

13 Inside mounting plate Plaque de montage intérieure 2105462

14 A corner Coin A 1105463

15 C corner Coin C 1105464

16 B corner Coin B 1105465

17 D corner Coin D 1105466

18 Snap Button Bouton pression 4105467

19 Vertical rod Tige verticale 8105468

20 Key 13 mm Clé 13 mm 2105469

21 Canvas assembly with Berco decal Toile assemblée avec décalque Berco 1105827

22 Shim Cale 2105471

23 Spacer Espaceur 1106080

24 Hex. bolt M8 x 1.25 x 16 Boulon hex. M8 x 1.25 x16 4O/L

25 Hex. bolt M8 X 1.25 X 45 Boulon hex. M8 X 1.25 X 45 2O/L

26 Carriage bolt M8 x 1.25 x 20 Boulon à carrosserie M8 x 1.25 x 20 2O/L

27 Carriage bolt Fully Threaded M8 x 1.25 x 65 Boulon carros. fileté p. long. M8 x 1.25 x 65 4O/L

28 Flange nut M8 x 1.25 Écrou à bride M8 x 1.25 4O/L

29 Nylon insert lock nut M8 x 1.25 Écrou à garniture de nylon M8 x 1.25 6O/L

30 Flat washer M8 Rondelle plate M8 2O/L

31 Reflective Berco decal Décalque Berco réfléchissant 2105369

O/L = Obtain Locally

106078 L-03

WHEN PERFORMANCE

& DEPENDABILITY

ARE NON NEGOTIABLE !

Bercomac Limit ée

92, Fortin Nor th, Adst ock, Quebec, Canada, G0N 1S0

WWW.BERCOMAC.COM

PRINTED IN CANADA

(ORIGINAL NOTICE)

Indice

Altri manuali Bercomac Accessori per spazzaneve

Bercomac

Bercomac 700706 Manuale utente

Manuali Accessori per spazzaneve popolari di altre marche

EGO

EGO SSA1200 Manuale utente

LANDY

LANDY S-SPE Manuale utente

Boss Snowplow

Boss Snowplow MSC23000 Manuale utente

Briggs & Stratton

Briggs & Stratton 1696092-00 Manuale utente

Cub Cadet

Cub Cadet 190-401-100 Manuale utente

Polaris

Polaris 2882798 Manuale utente

Meyer

Meyer CP7.5 Manuale utente

PRONAR

PRONAR PUV-3600HD Manuale utente

Boss Snowplow

Boss Snowplow SNR24024 Manuale utente

Husqvarna

Husqvarna ARST5120Xv1 Manuale utente

Blizzard

Blizzard POWER PLOW 810SS Manuale di servizio

LOFTNESS

LOFTNESS 481EFT Manuale utente

Rotary

Rotary SlushPlow Manuale utente

Western

Western MVP Manuale utente

Meyer

Meyer Lot Pro LP-7.5 Manuale utente

Boss Snowplow

Boss Snowplow BRX25175 Manuale utente

Motoalliance

Motoalliance DENALI Manuale utente

Warn

Warn 75785 Manuale utente