Planning2
Information about the monitoring system
The BERGHOCH monitoring system works digitally with BERGHOCH IP network cameras.
The cameras are supplied with power via the network cable. There are no additional power
cables to the camera to be placed.
The cables
The supplied cables for the cameras are 30m long. It is not possible to extend the cable with
an adapter.
We recommend to buy a new cable in the appropriate size. These are standard network
cables that you can buy at the lowest price on the Internet.
Network cables come in different categories. From 30m to 60m you need CAT 6 network
cable.
From 60m to max. 100m you need CAT 7.
We recommend to test the cable before laying, as there are different qualities between manu-
facturers.
When laying flush-mounted, the purchase of network cable on a roll is recommended.
The rolls are available as installation cables in various lengths.
Connection to the switch
It is possible to use several POE network switches in one system.
Use at least CAT 6 network cable and from 60m to max. 100m CAT 7 network cable to connect
the POE network switches.
Before you install the system permanently, we recommend that you first set up the system on
a table. This gives you the opportunity to familiarize yourself with the technology and to
clarify any questions before the final installation.
Tips for building
