4
CS-1
Active Full Range Integrated Commercial Audiovisual System
CREATING THE NEW NORMAL | Beta3 CS-1 Operation Manual www.elderaudio.com
A short push of the MENU/POWER button (11) activates a series of Menus depending on which screen is currently being
displayed. If you press and hold this button you can power down the CS-1. If the CS-1 has been turned o with the MENU/
POWER button it can be turned on by pressing and holding this button for 4 seconds.
The BACK button (12) functions as a return key, allowing you to step back through a sequence of screens until you reach
the Main Screen display.
The TONE controls can be found on the bottom left of the top panel. These allow you to alter the BASS (13) and TREBLE (14)
of the audio being reproduced by the CS-1.
The INPUT selection switch (15) enables you to determine which audio source is selected for reproduction by the CS-1.
There are 3 options that you can select from:
- AUX - the audio input from the 3.5mm socket (18) on the side panel of the Controller
- CS-1 - the audio either stored on the SD Card of the CS-1 or a USB card inserted into the side panel (19)
- LINE - the audio connected via the RCA sockets on the back panel (6) and (7).
The MIC VOL (16) allows you to control the volume of a dynamic microphone connected to the XLR socket (8) on the back
panel. This control is independent of the MUSIC VOL (17).
The large MUSIC VOL (17) allows you to control the replay sources volume of the CS-1.
2.2 Controller Back Panel
On the back panel of the Controller you will nd a number of sockets which allow other devices to be connected:
• The HDMI socket (1) allows you to connect an external display device which will show the same image as that on the
Controller screen (9).
• The VIDEO RCA socket (2) will allow you to connect an external display device which will show the same image as that
on the Controller screen (9).
• These 2 AUDIO RCA sockets (3) and (4) will allow you to connect the audio feed of the CS-1 to another device such as a
recorder.
• This TO AMP RJ45 socket (5) is used to connect the Controller to the Bass module. The cable carries power and control
signals to activate the various functions of the CS-1 System.
• These 2 AUDIO RCA sockets (6) and (7) allow you to connect another audio device to the CS-1 such as a CD/DVD player,
radio, etc. You select this source via the INPUT (15) control on the top panel.
• This MIC INPUT 3 pin balanced XLR input socket (8) allows you to connect a dynamic microphone to the CS-1, if you
want to make announcements or make a presentation. Volume for this input can be controlled via the MIC VOL (16) on
the top panel.
2.3 Controller Side Panel
On the right hand side of the Controller you will nd 2 input ports: 3.5mm (18) and USB (19).
The 3.5mm socket will allow you to connect external audio devices such as MP3 players to the CS-1. This can be routed via
the INPUT selection switch (15) on the top panel of the Controller.
The USB socket (19) allows you to add video, music and picture les to the CS-1. Once you have securely connected the
USB card to the Controller it will automatically search the card for usable les. It does not matter if the various les are
inside other folders on the USB card, the Controller will still locate the‘playable’les.
