BETOPPER Moving Laser Manuale utente

Model: LS3000RGB

Please read the manual carefully before using

Moving Laser

User Manual

201830478508.1

Product warranty card

Please ﬁll in the following content properly future maintenance.

Accordingly, for your each purchase of our systems wehave archive

Serial number and parameters for future reference.

Attention

1. Do not look directly at the bulb while the light is on.

Page 1

2.Follow the instructions. Do not disassemble the unit by yourself. Please

contact the skilled peoplein the event of aoperating problem.

3.The unit shallbeinstalled by professionals.

4.Place the unit away from the strobe light.

5.Keep the unit dry. Do not expose the unit to rain, moisture or dust.

Waterproof protection is needed when the unit is exposed outdoors.

6.Do not touch the unit and pull the power cable with wet hand.

7.Do not turn on or off the unit frequently. Otherwise, the service time will

be affected. Besides, keeping working for a long time should be avoided.

8.Fixed installation to prevent the unit from strong vibration or shock.

9.Prevent foreign objects from entering the unit to avoid malfunction.

10.Keep the distance between the unit and the objects in the lighting

50CM at least.

11.Do not connect the power cable or turn on the light before

installation.

12.Make sure the plug has been wired up properly before being powered

on.

13.Use the original shake-proof packing for re-transportation.

14.This symbol indicates separate collection of electronics and

electronic equipment.

The Company reserves the right to interpret the above terms.

LED Moving Beam After Sales Service

Testing: warranty: non-warranty:

Mode： Serial No.:

Distributor: Address:

Tel：

About Product Warranty

．Any product buy from our company (or authorized agent), which

used properly,and with this card, can have 1 year warranty for Lights,

mechanical parts, electronic parts. If out of the warranty situation,

we can provide the paid maintenance service.

2.The warranty is no longer valid in the following situations:

* Warranty cards and products have no serial numbers.。

* Product is damaged or show signiﬁcant signs of self-disassembly.

*Any unauthorized modiﬁcation (removal or replacement)

made to product or it?s components.

*Improper or excessive use of inappropriate repairs which result

in a repair failure or injury。

* Did not follow instructions or use in an environment not suitable

for product..

*Product damage caused by strong impact

*The warranty cannot be extended if the product as been serviced

*Light Source normal degradation

*Warranty card must be ﬁlled out with receipt of purchasing in order

for the warranty to be valid.

*Product is damaged due to abnormal voltage or caused by

other accidents (ex. Natural disasters).

．The Company reserves the right to interpret the provisions above.

The content of these articles is subject to change without notice!

LS3000RGB User Manual

TF card (including 16GB).

1. Make sure there is no ﬂammable or explosive subjects within min 1.5

meter nearby the installation.

2.Before installation, please check and make sure the power supply

voltage meet request of the system.

3. Please check ventilation and fans or exhaust passages are cleared.

4. The equipment should be ﬁxed ﬁrmly.

5. For security reasons, the appliance must be earthed.

Installation

Moving Laser*1 Use Manual*1 Power Cable*1

Power Adapter*1 Ring*1 Hanging bracket*1

Screw*2 Ceiling plate(optional)*1 TF card*1

TF card ﬁle description

1. This system only supports short ﬁle names, ﬁle names (including folder names) up to

8 bit ﬁle names and 3 bit extensions, ﬁle names and extensions by letters , numbers and

underscores. The ﬁle name cannot be more than 8 digits.no support Chinese characters,

or the ﬁle system can be not recognize.

2. TF card only special for TF ﬁle, cannot store with other ﬁles, support up to 255 ILDA ﬁles.

3. There should be a new folder in the TF card.There is a new.prg ﬁle (playlist ﬁle) and

some ILDA ﬁle under the new folder.Each newly added ILDA ﬁle should be added into to

the new.prg ﬁle.The format of the new.prg ﬁle is Use carriage return between each path,

The last path ending with two consecutive carriage returns.The name of the ilda ﬁle

corresponding to the path on the program list must same as add the name of the ilda

ﬁle.or the system cannot ﬁnd the corresponding Ilda ﬁle.

Content on the list ﬁle new.prg TF card / new / path inside the ﬁle

4. The ﬁles supported by this system are standard ILDA format ﬁles, ie ﬁles with the

extension ild.

5.The ﬁle system of the TF card should be in FAT format and support up to 16GB

Inspection

In order to use the product securely and properly, please read the manual

before using and follow the instructions strictly to prevent personal safety

trouble and product damage caused by misuse.

Take care of the product, check the possibility of the product damage

caused by transportation and check all the listed items are present upon

receipt of the product.

The unit is with good performance and complete package when it is delivered.

The end-user of this unit should follow all the above instructionsand warnings.

Any damage caused by misuse,malfunction and problem caused by ignoring

the instructions are not included in the repair guarantess of the manufacturer

or dealers.

All the products manufactured by Big Dipper Laser Science and Technology

CO.,Ltd have anti-fake logo.Please check the anti-fake logo to make sure it’s

original to protect you.The anti-fake logo is on the bottom of product.

Page 15

Declare

Page 2

Requirements of embedded installation:

1. Drill a hole with diameter of 190mm on ceilling ﬂoor.

2. install embedded plate on ceiling ﬂoor, ﬁx it with srews.

3. Hold light base and aim at the "unlock" point on the embedded plate.

4. Keep pushing up until the light base completely embedded in the

plate,clockwise rotate 15°.

5. To ensure safety,user should clamp the light tightly before releasing hands

in case of the light falling down.

6.The light base has hanging accessories, user can add the safety rope

hanger according to site situation.

Troubleshooting

Following are a few common problems that may occur during

operation.Here are some suggestions for easy troubleshootinge.

A. The ﬁxture does not work,no light.

1. Check the connection of power and main fuse.

2. Make sure the mains voltage on the main connector.

3. Check the power LED.

B. Not responding to DMX controller.

1. DMX LED should be on.If not,check DMX connectors,cables to see if

link properly.

2. If the DMX LED is on and no response to the channel,check the

address settings and DMX polarity.

3. If you have intermittent DMX signal problems,check the pins on

connectors or on PCB of the ﬁxture or the previous one.

4. Try to use another DMX controller.

5. Check if the DMX cables run near or run alongside to high voltage

cables that may cause damage or interference to DMX interface circuit.

C. Not response to the sound.

1. Make sure the ﬁxture not receive DMX signal.

2. Check microphone to see if it is good by tapping the microphone.

D. One of the channels is not working well.

1. The stepper motor might be damaged or the cable connected to the PCB

is broken,

2. The motor’s drive IC on the PCB might be out of service.

Page 14

Embedded installation

Independent installation

Page 3

R:638nm 120mW

G:532nm 150mW

B:450nm 30mW

1. At last ﬁxture, the DMX cable has to be terminated with a terminator

to reduce signal errors.Solder a 120-ohm 1/4W resistor between pin

2(DMX-) and pin 3(DMX+) into a 3-pin XLR-plugand plug it in the

DMX-output of the last ﬁxture.

2. Connect the ﬁxture together in a “daisy chain”by XLR plug cable from

the output of the ﬁxture to the input of the next ﬁxture.The cable

can’t be branched or split to a “Y”cable.

3. Inadequate or damaged cables,soldered joints or corroded connectors

can easily distort the signal and shut down the system.

The DMX output and input connectors are pass through to maintain

the DMX circuit when one of the units’power is disconnected.

Master-slave Connection

Unit 1 Unit 2 Unit 3 Unit 4

set as master

set as slave set as slave

DMX OUTPUT

1. When there are multiple machines need to be connected, have to set

one of them as master and in the sound control mode or auto mode,

then set other machines as slave 1. or slave 2

2. At last ﬁxture, the DMX cable has to be terminated with a terminator

to reduce signal errors.Solder a 120-ohm 1/4W resistor between pin

2(DMX-) and pin 3(DMX+) into a 3-pin XLR

plugand plug it in the

DMX-output of the last ﬁxture.

3. Connect the ﬁxture together in a “daisy chain”by XLR plug cable from

the output of the ﬁxture to the input of the next ﬁxture.The cable

can’t be branched or split to a “Y”cable.

4. Inadequate or damaged cables,soldered joints or corroded connectors

can easily distort the signal and shut down the system.

The DMX output and input connectors are pass through to maintain

the DMX circuit when one of the units’power is disconnected.

( or )

Page 13

Page 4

Sound/Auto-play/ILDA ﬁle/Playlist ﬁle/DMX /master slave

Standard Paking

Power Adapter*1,Hanging bracket*1,Screw*2,Instruction

manual*1,Ceiling plate(optional)

LS3000RGB

Input:AC 100-240V 50/60Hz

Output: DC 24V 2A

Te chn ical Speciﬁcation

Model

Technical

RGB synthetic laser 300mW

Light source

Adapter

50WInput power

Control mode

DMX channel 20CH/22CH

Effect

Net weight 2.5 kg

Lightweight and ﬂexible,Combined with ceiling plate

accessorie,Can be embedded in ceiling or wall mounting.

Horizontal angel: Pan angle is 540°

Vertical angel: Tilt angle is 180°

Fantastic night light effect,Great for bar, slow shake, club,

disco. Etc

540°

180°

18 20 Speed/Sensentivity

000-255 Speed Slow-Fast (Auto and Porgramme

Mode in Effect)

000-255 Sound Sensentivity Less-Higher (Sound

Display in Effect)

000-049 Default phase(Digital menu set phase)

050-099 Phase setting 1

100-149

150-199

20 22 Reset 200-255 (Stay 5S) Lamp Reset

19 21 Laser phase setting Phase setting 2

Phase setting 3

Phase setting 4

200-255

Termination reduces signal errors and avoid signal transmission

problems and interference.It is always advisable to connect a

DMX terminal.(Resistance 120 ohm 1/4W) between pin2(DMX-)

AND pin3(DMX+) of the last ﬁxture.

Unit 1

DMX Connection

Unit 2 Unit 3 Unit 4

Page 12

DMX 512 Controller

DMX OUTPUT

INPUT

OUTPUT

COMMON

12345678

GND

Page 5

DMX output DMX input

12345678 12345678

1 23 123

1.GND

2.+

3.-

Internet Connector

237.4

288

75.5

170

162

000-069

070-139

140-209

210-255

17 19 Function Choose

000-009 No Function

010-099 Auto Play(Laser Display Default Setting)

100-199 Sound Control Play

200-255 Prog ramme Mode Play(Laser Display

as TF list)

Auto Speed Setting

Channel 20

Channel 22

X Motor Forward

X Motor Reversion

Y Motor Forward

Y Motor Reversion

Digital Display Opening

In 60S, Digital Display Off

In 10S, Digital Display Off

In 30S, Digital Display Off

Press Cfrm to Factory

Default Setting

Auto

Sound

Dmx Channel Setting

X Motor Reversion Setting

Y Motor Reversion Setting

Reset

Display

Test

Testing

Press Cfrm to Reset

Ver

Default

ENTER

Sound Sensitivity

Setting

Programme Mode,

Auto Speed Setting Programme

DMX512 Setting

ENTER

ILDA Selection ILDA

ENTER

MENU 4 Phases Setting Phase Setting

Sizes Setting Laser Size Setting

ENTER

Master Mode

ENTER

Sl1 and Master in Synchronization

Sl2 Motor and Master Reversion Master-Slave Setting

DMX 001-512

ENTER

Laser Rotation in

Middle

No Rotation

Auto Rotation Clockwise

Auto Roation Anticlockwise

Unchange

Mannual Adjust Drawing

000

001-150

151-255

000

001-180

181-217

218-255

000-001

002-149

150-255

15 17

011-200

Wave effect, ﬁxed amplitude, slow speed----block

201-255

Wave effect, ﬁxed speed, small amplitude----large

Normal Indication

Spot Display

Phase Display

Dot Display

000-018

019-037

038-056

057-075

076-094

095-113

114-132

133-151

152-170

209-227

16 18 Laser Colors

228-246

247-255

Laser Rotation with

Y Direction

11 13

Laser Drawing

13 15

000-010 No waves

14 16

Laser X Axis Wave

Laser Display Mode

Choose

171-189

190-208

Anually adjust the Y-axis rotation angle

Automatic rotation around the Y axis

Manually adjust the rotation angle

Automatic progressive subtraction cycle

Page 6

Menu Functio

Page 11

White

Red

Green

Blue

Yellow

Purple

Cyan

Red, green and blue Tri-color segmentation

Yellow blue purple Tri-color segmentation

White red green blue yellow purple blue

Seven-color segmentation

Red, green and blue Three-color ﬂow

Yellow blue purple Three-color ﬂow

White red green blue yellow purple blue

Seven-color ﬂow

Voice-activated change to color

(need matching speed sensitivity channel)

Press the “MENU” button until the digital display ,Press “ENTER” to enter the

auto mode.Press the “UP”/“DOWN” button to adjust the speed of the auto mode.Speed

adjustment range is from to , is the slowest is the fastest.



Press “ENTER” to save the settings and exit the current menu to return to the previous

menu.

Press the “MENU” button until the digital display ,Press “ENTER” to enter the

Voice control model.Press the “UP”/“DOWN” button to adjust the speed of the Voice

control model.Speed adjustment range is from to , has the lowest

sensitivity and has the highest sensitivity.

Press “ENTER” to save the settings and exit the current menu to return to the previous

menu.

Press the “MENU” button until the digital display ,Press “ENTER” to enter the

Program list,Automatically loop the ILDA ﬁle on the playlist ﬁle,Press the “UP”/“DOWN”

button to adjust the speed of the Program list.Speed adjustment range is from -

, has the lowest sensitivity and has the highest sensitivity .

Press “ENTER” to save the settings and exit the current menu to return to the previous

menu.

Press the “MENU” button until the digital display ,Press “ENTER” to enter the

“ilad” document model.Press the “UP”/“DOWN” button to adjust the ﬁle rotation.Ilad ﬁle

selection adjustment range is .

Press “ENTER” to save the settings and exit the current menu to return to the previous

menu.

Press “ENTER” to save the settings and exit the current menu to return to the previous

menu.

Press the “MENU” button until the digital display ,Press “ENTER” to enter Phase

setting.Press the “UP”/“DOWN” button to adjust phase setting.The speed phase setting

is adjusted to - .

Press the “MENU” button until the digital display ,Press “ENTER” to enter Laser

size setting.Press the “UP”/“DOWN” button to adjust Laser size .The Laser size setting

is adjusted to - .The laser has the smallest size and the

laser has the largest size.

Press “ENTER” to save the settings and exit the current menu to return to the previous

menu.

setting is , .

lamp, others are slave lamps

The actual adjustment range is

determined by the number of ilda ﬁles in the TF card.

（Mannual Mode)

Channe

Function Value Percent/Setting

1 1 Pan 000-255 0-540°(8bit）

2 Pan Fine 000-255 （16bit）

2 3 Tilt 000-255 0-180°(8bit）

4 Tilt Fine 000-255 （16bit）

3 5 Pan/Tilt Speed

000-255 Fast to slow

4 6 Laser Mode

Choose

000-049 Cut-off Light

050-099

Sound (Controlled with Speed/Sensentivity channel)

100-149 Auto

150-199 prog model

200-249 ilda model

5 7 000-255 3 Values 1 GOBO (Mannual Mode)

Not Strobe

6 8

Laser Patterns X

Direction Movement

000-167 Laser gobo manually adjust the position

Laser gobo automatic circulating motion,from Left to right

Laser gobo automatic circulating motion,from

right to left

Laser gobo automatic circulating motion,right and left

Irregular jump

168-188

189-209

210-255

Default Patterns

Selection

ILDA Files Choose (ILDA Mode)

000-009

010-255 Strobe Slow-Fast （Mannual Mode）

Strobe

8 10

No Zoom

000-010

9 11

Laser Zoom

011-104

Auto Zoom+

Auto Zoom-

Recycle Zoom

No rotation

105-154

155-204

205-255

000

001-150

Mannual Zoom

151-255

Laser Rotation with

X Direction

10 12

000-255

250-255 Mannual Mode

000-167

168-188

189-209

210-255

Laser gobo Vertical manual adjust the position

Laser gobo automatic circulating motion,from

below to upper

Laser gobo automatic circulating motion,from

upper to below

Laser gobo automatic circulating motion,below and

lupper Irregular jump

Anually adjust the X-axis rotation angle

Automatic rotation around the X axis

Press “MENU”till screen show , press “ENTER”to master-slave setting, press

“UP”/“DOWN ”to adjust master-slave setting. Press “ENTER”to save setting.

Page 10

DMX channel function

Page 7

Instruction of Function

Auto model

Voice control model

Master-slave setting

Master-slave

and

: Master mode, several lamps connected togethre, there will be one lamp as master

Laser Patterns Y

Direction Movement

Program list mode

ILDA model

Phase setting

Laser size setting

Press “ENTER” to exist current menu and back to previouse manue.

: Slave mode 1, same setting as master lamp. Display as master.

: Slave mode 2, same settingas master lamp, x ray ,y ray run opposite to master

lamp. Partly LED color same as master lamp,partly difference.

Press the “MENU” button until the digital display ,Enter the test mode luminaire to

test each function in sequence.

Press the “menu” button to exit the test mode and return to the previous menu.

Press the “menu” button until the digital display , press the “enter” button to view

the information display.

If the luminaire is not equipped with a TF card, the digital prompt and .If

the light has a card, but without documents in the card,ﬁle format is incorrect,ﬁle storage

the path is in correct, digital display Prompt and .

Press“MENU” bottom till screen show , press “ENTER”to channel setting. Press

Channel Setting

press“MENU” bottom till screen show , press“ENTER”to adress setting, press

“UP”/“DOWN”to adjust MDX address. Press “ENTER”to save setting.

Press “ENTER” to exist current menu and back to previouse manue.

Adress Setting

The range of DMX address settingis -

“UP”/“DOWN”to adjust channel setting.Press “ENTER”to save setting.

Press “ENTER” to exist current menu and back to previouse manue.

press“MENU” bottom till screen show , Press“ENTER”to X-axis inversion setting.

Press“UP”/“DOWN”to adjust X-axis inversion setting.

Press “ENTER” to exist menu and back to up previouse manue.

Page 9

Reset

Press "MENU" key until the digital display , press "ENTER" key to enter the reset

setting, press "UP" / "DOWN"Key to adjust the reset setting.

Reset settings are and respectively

: Press ENTER to exit the current menu and return to the previous menu

: Press ENTER, the lamp is reset

Press "ENTER" to exit the current menu to return to the previous menu.

Restore the default settings

Press "MENU" key until the digital display , press "ENTER" key to enter restore

default settings, press "UP" /"DOWN" key to restore the default settings.

Restore default settings are and

：

Press ENTER to exit the current menu and return to the previous menu.

Press ENTER to restore the default setting

Press "ENTER" to exit the current menu to return to the previous menu.

The default factory values are as follows:

1. Auto model,speed is

2.Sound control on, voice sensitivity

4. The main and auxiliary modes are

5. The channel is set to

6.The address code is

7.X-axis positive, Y-axis positive

8.Digital display is positively lit

Information show

Page 8

Channel setting is and

X-axis inversion setting

X axis setting is and

: X axis positive

: X axis negative

Y-axis inversion setting

Press the "MENU" button until is displayed on the digital display,Press "ENTER" key

to enter the Y-axis to reverse setting, press "UP"/ "DOWN" key to adjust the y-axis inversion

setting

Y-axis inversion settings are and respectively

: Y-axis positive

: Y-axis reversed

Press "ENTER" to exit the current menu to return to the previouse menue.

Display setting

Press "MENU" key until the digital display , press "ENTER" key to enter the display

settings, press "UP" / "DOWN"

Key to adjust the display settings.

Display settings are , , and

: Digital display backward

: Displayed off after 30 seconds without pressing the button

: Displayed off after 60 seconds without pressing the button

: Digital display is steady

Press "MENU" to exit the current menu to return to the previous menu.

Test setup

Press "ENTER" to exit the current menu to return to the previouse menue.

3. The Laser size are

：

Press “ENTER” to exist current menu and back to previouse manue.

: Slave mode 1, same setting as master lamp. Display as master.

: Slave mode 2, same settingas master lamp, x ray ,y ray run opposite to master

lamp. Partly LED color same as master lamp,partly difference.

Press the “MENU” button until the digital display ,Enter the test mode luminaire to

test each function in sequence.

Press the “menu” button to exit the test mode and return to the previous menu.

Press the “menu” button until the digital display , press the “enter” button to view

the information display.

If the luminaire is not equipped with a TF card, the digital prompt and .If

the light has a card, but without documents in the card,ﬁle format is incorrect,ﬁle storage

the path is in correct, digital display Prompt and .

Press“MENU” bottom till screen show , press “ENTER”to channel setting. Press

Channel Setting

press“MENU” bottom till screen show , press“ENTER”to adress setting, press

“UP”/“DOWN”to adjust MDX address. Press “ENTER”to save setting.

Press “ENTER” to exist current menu and back to previouse manue.

Adress Setting

The range of DMX address settingis -

“UP”/“DOWN”to adjust channel setting.Press “ENTER”to save setting.

Press “ENTER” to exist current menu and back to previouse manue.

press“MENU” bottom till screen show , Press“ENTER”to X-axis inversion setting.

Press“UP”/“DOWN”to adjust X-axis inversion setting.

Press “ENTER” to exist menu and back to up previouse manue.

Page 9

Reset

Press "MENU" key until the digital display , press "ENTER" key to enter the reset

setting, press "UP" / "DOWN"Key to adjust the reset setting.

Reset settings are and respectively

: Press ENTER to exit the current menu and return to the previous menu

: Press ENTER, the lamp is reset

Press "ENTER" to exit the current menu to return to the previous menu.

Restore the default settings

Press "MENU" key until the digital display , press "ENTER" key to enter restore

default settings, press "UP" /"DOWN" key to restore the default settings.

Restore default settings are and

：

Press ENTER to exit the current menu and return to the previous menu.

Press ENTER to restore the default setting

Press "ENTER" to exit the current menu to return to the previous menu.

The default factory values are as follows:

1. Auto model,speed is

2.Sound control on, voice sensitivity

4. The main and auxiliary modes are

5. The channel is set to

6.The address code is

7.X-axis positive, Y-axis positive

8.Digital display is positively lit

Information show

Page 8

Channel setting is and

X-axis inversion setting

X axis setting is and

: X axis positive

: X axis negative

Y-axis inversion setting

Press the "MENU" button until is displayed on the digital display,Press "ENTER" key

to enter the Y-axis to reverse setting, press "UP"/ "DOWN" key to adjust the y-axis inversion

setting

Y-axis inversion settings are and respectively

: Y-axis positive

: Y-axis reversed

Press "ENTER" to exit the current menu to return to the previouse menue.

Display setting

Press "MENU" key until the digital display , press "ENTER" key to enter the display

settings, press "UP" / "DOWN"

Key to adjust the display settings.

Display settings are , , and

: Digital display backward

: Displayed off after 30 seconds without pressing the button

: Displayed off after 60 seconds without pressing the button

: Digital display is steady

Press "MENU" to exit the current menu to return to the previous menu.

Test setup

Press "ENTER" to exit the current menu to return to the previouse menue.

3. The Laser size are

：

Indice

Altri manuali BETOPPER Apparecchio di illuminazione

BETOPPER

BETOPPER Beam Moving Head Light Manuale utente

Manuali Apparecchio di illuminazione popolari di altre marche

Emos

Emos CLASSIC ZY1431T Manuale utente

Westinghouse

Westinghouse Outdoor Lighting Fixture Manuale utente

Hedler

Hedler C 12 silent Manuale utente

Blizzard Lighting

Blizzard Lighting Puck: CSI Manuale utente

Energetic Lighting

Energetic Lighting ELYSL-5004 Series Manuale utente

Lightmaxx

Lightmaxx Shaft 5R Manuale utente

Triarch

Triarch 31083 Manuale utente

Philips

Philips 32614 Series Manuale utente

IKEA

IKEA TIVED Manuale utente

Lightolier

Lightolier LP200 Manuale utente

Chauvet Professional

Chauvet Professional ROGUE R1 BEAM WASH Manuale utente

Martin

Martin MAC 250 Krypton Manuale utente

Cooper Lighting

Cooper Lighting Halo L3232E Manuale utente

Stageline

Stageline ODW-2410RGBW Manuale utente

Light Sky

Light Sky Tornado Series Manuale utente

Lightolier

Lightolier Paralyte 2424 PLA2G9LS26U Manuale utente

Lightolier

Lightolier Lytespan 83ED17S Manuale utente

Lightolier

Lightolier Calculite CS8226 Manuale utente