BeWAN AP54 Manuale utente

The information in this manual is subject to change without notice.

BeWAN systems cannot be held liable for any partial non-compliance between this manual and the

product which it describes, nor for any accidental damage resulting from the use of the above.

The manual provided is protected by Copyright law, and may neither be copied nor distributed in

any way for any purpose. Use of the documentation is intended for private use only. Any total or

partial representation or reproduction requires the approval of the author or of the latter’s legal

successors. Commercial use is strictly forbidden. Violation of these regulations may result in

prosecution by law and any prosecuted persons being held financially liable for any inconvenience

and loss to the Copyright owner.

October 2003 edition.

Similarly, the product names indicated in this manual for identification purposes may be

commercial brands, registered or not by their respective companies.

BeWAN Wi-Fi AP54 3

Table of contents

Foreword.................................................................................................... 5

Box contents .........................................................................................................................5

Knowledge required .............................................................................................................6

Technical assistance .............................................................................................................6

Usage precautions.................................................................................................................6

Location .......................................................................................................................................6

Upkeep and maintenance.............................................................................................................6

Main technical characteristics ..............................................................................................7

Indicator lights and rear panel of the Access Point ..............................................................8

Indicator lights.............................................................................................................................8

Rear panel....................................................................................................................................8

Installing the BeWAN Wi-Fi AP54.......................................................... 9

Positioning the Access Point ................................................................................................9

Connection............................................................................................................................9

Access to the Web interface ...............................................................................................10

Configuring the BeWAN Wi-Fi AP54................................................... 12

"Primary Setup" tab ............................................................................................................12

"System" tab .......................................................................................................................18

Modification of administration password..................................................................................18

Restoring the BeWAN Wi-Fi AP54 to its factory settings..........................................................19

Saving a configuration...............................................................................................................19

Restoring a configuration ..........................................................................................................19

Upgrading the firmware ............................................................................................................20

"Operating Mode" tab.........................................................................................................21

Access Point (Server) mode .......................................................................................................22

The Roaming principle...............................................................................................................24

Repeater mode ...........................................................................................................................26

Bridge mode ...............................................................................................................................28

"Status" tab .........................................................................................................................30

"Advanced Setup" tab.........................................................................................................31

"Access Control" tab..................................................................................................................31

"Advanced Wireless" tab............................................................................................................32

BeWAN Wi-Fi AP54 4

Configuring the computers .................................................................... 34

With Windows 98 and Me..................................................................................................34

With Windows 2000...........................................................................................................36

With Windows XP..............................................................................................................38

BeWAN Wi-Fi AP54 5

Foreword

The BeWAN Wi-Fi AP54 access point provides users with simple, rapid and secure access to a

wireless LAN network, allowing them to connect to the Internet or work in a room without a wired

network connection. The BeWAN Wi-Fi AP54 provides you with a fast connection of up to 54

Mbps with other equipment using the 802.11g standard, and remains compatible with the 802.11b

standard.

The access point also provides you with security (encryption function ensuring the integrity of the

data transferred with wireless clients and checking of remote Wireless equipment’s MAC address)

and other improved functions, without compromising its interoperability with all 802.11 or 802.11b

wireless LAN equipment (allowing communication with equipment produced by other

manufacturers) and wired, Ethernet-type networks.

This Access Point (or AP), can be used to link up Stations (clients: laptop or desktop computers

with a Wireless USB adapter or card) and the wired network. By interconnecting different Wireless

devices, it acts as a bridge and its role can be compared to that of a hub or switch in a cable

environment.

Note: in order to optimise traffic, you are advised to limit the number of users to ten.

It is also possible to install and link several Access Points together in a network, to increase the

number of users and the operating range. Within the company, it is then possible to move around

freely, without interrupting the connection (Roaming function). The wireless network (WLAN or

Wireless LAN) uses radio waves and provides wireless access to all network resources and services

within the company, in one or several buildings.

Box contents

In addition to the BeWAN Wi-Fi AP54, guaranteed for 3 years, the box must contain the following

basic elements:

Quick Installation Guide

BeWAN Wi-Fi CD-ROM

Power supply cable

RJ45 Ethernet cable

You should also find:

• 1 external antenna to be screwed onto the Access

Point,

• a warranty registration card

Note: should any of these elements be missing or damaged, contact your retailer or the BeWAN

systems client services.

BeWAN Wi-Fi AP54 6

Knowledge required

Prior knowledge of telecommunications is not necessary when using the BeWAN Wi-Fi AP54. In

the BeWAN Wi-Fi AP54 documentation, we assume that you are already familiar with the

Windows user interface, commands and utilities. We will therefore not go over these points. If

necessary, please refer to the Windows manual or the Windows on-line help.

Technical assistance

The BeWAN Wi-Fi AP54 and its documentation are designed to be as simple as possible, so that

they can be used not only by professionals but also by the individual user at home.

Before proceeding with the installation of the BeWAN Wi-Fi AP54, we recommend that you

you would like to enjoy the benefits of the after-sale service.

Follow the step-by-step instructions in this User’s guide. If a problem arises during the installation

or configuration of the BeWAN Wi-Fi AP54, refer to the instructions provided on the warranty

card.

Note: for information about the BeWAN systems technical assistance service, or to obtain product

upgrades, consult the BeWAN systems web site.

Usage precautions

Carefully read the following safety instructions before installing or using the BeWAN Wi-Fi

AP54. The usage instructions must be followed exactly.

Location

• Avoid using, placing or storing the Access Point in areas that are exposed to intense light or high

temperatures, or close to sources of heat. Maximum temperature must not exceed 40°C (104°F).

• Avoid installing the Access Point in a humid or dusty area.

• Keep the Access Point in a secure and stable location.

• Keep the Access Point out of the reach of children.

Upkeep and maintenance

• Do not open, disassemble or modify any part of the Access Point. Internal inspections,

modifications and repairs must imperatively be carried out by accredited and qualified

technicians. Opening the Access Point or any internal modification will void the warranty.

• Before cleaning the Access Point, disconnect its power supply.

• When cleaning the Access Point, do not use certain chemical products which could damage

plastic materials. Do not use substances containing alcohol, benzene, paint thinner or other

flammable products.

• Do not bring the Access Point into contact with water or other liquids. No liquid must get inside

the Access Point. If the outside of the unit comes into contact with a liquid, wipe it using a soft

and absorbent cloth.

BeWAN Wi-Fi AP54 7

Main technical characteristics

INTERFACE

LAN • One 10/100 Ethernet port,

• Cable detection (MDI/MDI-X).

Indicator li

hts 3 LEDs: POWER, WLAN, LAN

Antenna 3 dBi

ain, RSMA connector, ad

ustable and detachable

Reset button Reset to default setting

(hold the reset button for 10 seconds)

RADIO

Standards IEEE 802.11

and 802.11b

Fre

uenc

bands 2,412 ~ 2,497 GHz

Channels used Euro

e and metro

olitan France: 1-13

Modulations 802.11b: CCK (11 Mbps & 5,5 Mbps);

DQPSK (2 Mbps);

DBPSK (1 Mbps).

802.11g: OFDM

Media access

rotocol CSMA/CA with ACK

Out

ower 15 dBm ± 1

Receiver sensitivit

-80 dBm at 11 Mb

s; -65dBm at 54 Mb

Data Rates 802.11b: 11, 5.5, 2, 1 Mbps

802.11g: 54 , 48, 36, 24, 18, 12, 9, 6 Mbps

Auto fallback

(*) The performances depend on environment and distance.

SOFTWARE

Mana

ement Web interface, SNMP

eration modes Server / Re

eater / Brid

e / Multi-brid

Support • DHCP client,

• Roaming function,

• Basic Rate Setting,

• Wireless Distribution System (WDS),

• Configuration Backup/Restore,

• Firmware upgrade available on www.bewan.com.

Security • WEP (64/128 bits) and WPA (TKIP and AES

algorithms) encryption,

• MAC address filter,

• Enable/Disable SSID Broadcast.

Protocols TCP/IP, IPX/SPX, NetBEUI

OTHERS

Dimensions / Wei

ht 142 x 101 x 36,9 mm

(

LxWxH

)

/ 330

Power supply Input: AC 100~240 V; 0.35 A; 50~60 Hz

Output: DC 4.7~5.3 V; 2 A

BeWAN Wi-Fi AP54 8

Indicator lights and rear panel of the Access Point

Indicator lights

Indicator lights, situated on the BeWAN Wi-Fi AP54, show the status of the Access Point and

connections.

Indicator

name

Colour of

indicator Status Description

Red

Off

Access Point is switched off

Access Point is switched on

Green

Off

Blinks

The product is switched off

Data is being sent or received via the

Wireless network

Orange

Off

The Ethernet cable is not connected

The Ethernet connection is established and

data sent or received via the wired network

Rear panel

• The RESET button relaunches the BeWAN Wi-Fi AP54 and re-establishes the original

parameters. You have only to press and hold the button for about 10 seconds.

Note: this is useful if, for example, you have forgotten your password. However, reinitialising the

BeWAN Wi-Fi AP54 clears your customised parameters.

• The Ethernet RJ45 (NETWORK) port is used to connect your PC, a hub or a switch.

Note: thanks to the cable auto-detection system, you don’t have to use a straight cable to connect

the Access Point to a hub.

• The connector for the power cable provides the BeWAN Wi-Fi AP54 with its power supply.

Warning: only use the adapter provided in the packaging.

BeWAN Wi-Fi AP54 9

Installing the BeWAN Wi-Fi AP54

This chapter contains a detailed description of the installation procedure for the BeWAN Wi-Fi

AP54. We recommend that you follow the installation steps in order. The equipment installation

involves no more than choosing an appropriate location, connecting the power cable and the

Ethernet cable. You must then interconnect the Wireless hardware.

Before beginning, deactivate any software that might disrupt the installation procedure, such as

anti-virus products. Close all open applications.

Positioning the Access Point

1. Choose the site for the BeWAN Wi-Fi AP54.

The positioning of the Access Point(s) is very important. The network coverage and

performances depend on the positioning of the Access Point. To optimise performances and

obtain better signal quality, we recommend you position the BeWAN Wi-Fi AP54 in a high

position, in the centre of the zone covered.

Note: the nature of the walls, partitions and ceilings greatly affect the network’s quality and

performances.

Before deciding permanently on the positioning, we recommend you carry out several tests to

check the strength and quality of the signal, whilst moving around the planned coverage zone.

These tests will allow you to determine the best position for the Access Point. Unlike a wired

network, the bandwidth varies according to distance. The smaller the zone covered, the better

the performances.

Note: microwave ovens radiate in the 2.4 GHz range and are thus a possible source of

interference. The units should therefore be as far as possible from such appliances.

2. Adjust the antenna.

Position the antenna in order to obtain the maximum signal strength for your wireless

equipment.

Note: the supplied antenna can also be replaced with another one that uses the same

connectors.

Connection

To connect the BeWAN Wi-Fi AP54, proceed as follows:

1. Locate the power cable included in the package. Connect the appropriate end of the cable to the

connector on the back of the BeWAN Wi-Fi AP54. Connect the other end to a power outlet that

is compatible with the specifications printed on the power unit. The red light should light up

when the unit has power.

Note: powering the Access Point with a different voltage would damage the product and

invalidate the warranty.

BeWAN Wi-Fi AP54 10

2. If you have an Ethernet card, locate the Ethernet cable provided in the package. Connect one

end to the BeWAN Wi-Fi AP54’s RJ45 Ethernet port and the other end to your computer (or an

Ethernet hub or switch). The light will light up if the connection is correct.

Access to the Web interface

After the physical installation, the configuration of the BeWAN Wi-Fi AP54 requires that you

access and use the HTML interface via your computer’s browser (Microsoft®Internet Explorer, for

example).

The default IP address of the BeWAN Wi-Fi AP54 is 192.168.1.1250 with a subnet mask o

255.255.255.0. To access the HTML interface, you must give your computer a static IP address

that falls within the same subnet as the IP address of the BeWAN Wi-Fi AP54 (example: IP

address of 192.168.1.10 with the same mask).

To configure your computer, refer to the chapter “Configuring the computers” on page 34.

Note: if you don’t have an Ethernet card, you can still configure the Access Point via the Wi-Fi

network. To do so, in your Wi-Fi card’s properties, you must provide an IP address that is

compatible with the Access Point’s default IP address. Configure your Wi-Fi hardware in

Infrastructure mode, then connect to the Access Point, the default SSID of which is BeWANAP54.

Indice

Manuali Router wireless popolari di altre marche

Milesight

Milesight UG67 Manuale utente

Airlogic

Airlogic AirSync Class 1 Manuale del proprietario

Samsung

Samsung WCH730B Manuale utente

TELEFONICA

TELEFONICA USB Adapter Manuale utente

NETGEAR

NETGEAR PowerLINE WiFi 1000 Series Manuale utente

Askey

Askey RAC2V1K Manuale utente

Alloy

Alloy WLF2454AP-S Manuale utente

TP-Link

TP-Link TL-WR542G Manuale utente

NETGEAR

NETGEAR WNR2000v4 Manuale utente

Hama

Hama 53120 Manuale utente

Intellinet

Intellinet 524582 Manuale utente

Asus

Asus RT-N10P Manuale utente

D-Link

D-Link DIR-506L Manuale utente

Sapido

Sapido GR297n Manuale utente

Asus

Asus DSL-N55U Manuale utente

AMTC

AMTC WR7502 Manuale utente

Compaq

Compaq CP-2W - iPAQ Connection Point Manuale utente

SMC Networks

SMC Networks WBR14-N2 FICHE Manuale utente