BH bikes ATOMe Manuale utente

TekDoc

V0.0

ATOMe

USER MANUAL

2024

ATOMe 2024

BH 2

01 INTRODUCTION......................................................................................................... 3

SYMBOLS.....................................................................................................................................................................................3

02 BH WARRANTY.......................................................................................................... 4

LIFETIME FRAME WARRANTY...................................................................................................................................................4

EXTENDED WARRANTY FOR BH BATTERIES...........................................................................................................................5

REGISTERING EXTENDED WARRANTIES ................................................................................................................................5

WARRANTY OF PARTS OF THE ELECTRICAL ASSISTANCE SYSTEM...................................................................................6

SUBMITTING A WARRANTY CLAIM..........................................................................................................................................6

CONDITIONS THAT MAY VOID THE WARRANTY OF ELECTRICAL COMPONENTS.............................................................6

03 MAINTENANCE ......................................................................................................... 6

INSPECT THE BICYCLE BEFORE USE .......................................................................................................................................6

KEEP THE BICYCLE CLEAN........................................................................................................................................................7

KEEP THE TRANSMISSION LUBRICATED AT ALL TIMES .......................................................................................................7

PART MAINTENANCE .................................................................................................................................................................7

SPARE PARTS ..............................................................................................................................................................................8

AFTER A FALL, BLOW OR IMPACT.............................................................................................................................................8

04 WARNINGS ON USE................................................................................................... 9

MAXIMUM TYRE SIZE.................................................................................................................................................................9

MINIMUM AND MAXIMUM INSERTION LENGTH OF THE SEAT POST..................................................................................9

MAXIMUM FORK LENGTH (AXLE-TO-CROWN)........................................................................................................................9

MAXIMUM NUMBER OF STEERING SPACERS .........................................................................................................................9

POSITION OF THE SPINDLE INSIDE THE FORK TUBE ............................................................................................................9

INTENDED USE............................................................................................................................................................................9

05 WARNINGS ON USE OF THE ELECTRICAL ASSISTANCE SYSTEM ............................. 9

CARE AND INSTRUCTIONS FOR USE OF THE ELECTRICAL COMPONENTS AND BATTERIES ..........................................9

RECOMMENDATIONS TO MAXIMISE THE BATTERY LIFE .....................................................................................................9

WARNINGS ON THE USE OF BATTERIES .................................................................................................................................9

UNSUITABLE CHARGING AND DISCHARGING ENVIRONMENTS ANDSOLUTIONS..........................................................10

RECYCLING................................................................................................................................................................................10

MOTOR .......................................................................................................................................................................................10

06 PEDAL ASSISTANCE SYSTEM OPERATION ............................................................. 10

COMPONENTS OF THE PEDAL ASSISTANCE SYSTEM ........................................................................................................10

PEDAL ASSISTANCE SYSTEM.................................................................................................................................................10

ACTIVATION AND DEACTIVATION OF THE PEDAL-ASSIST SYSTEM .................................................................................11

PARTS OF THE CONTROL UNIT...............................................................................................................................................11

ASSISTANCE TYPE ...................................................................................................................................................................12

WALK ASSIST MODE.................................................................................................................................................................12

START OF PEDALING................................................................................................................................................................13

BATTERY CHARGE LEVEL DISPLAY........................................................................................................................................13

BATTERY AND CHARGER .........................................................................................................................................................13

BATTERY CHARGING ...............................................................................................................................................................14

ENERGY SAVING MODES ........................................................................................................................................................16

APP SHIMANO ETUBE PROJECT ............................................................................................................................................17

OPERATION WITH GARMIN DEVICE ......................................................................................................................................17

ELECTRIC SYSTEM UPDATE ...................................................................................................................................................17

07 SIZES AND DIMENSIONS ........................................................................................ 18

08 TECHNICAL SPECIFICATIONS................................................................................. 19

09 ASSEMBLY AND SPARE PARTS................................................................................ 22

DIMENSIONS OF THE STEERING TUBE..................................................................................................................................22

REAR AXLE SPLIT PIVOT AND DERAILLEUR..........................................................................................................................23

MAIN PIVOT ASSEMBLY...........................................................................................................................................................24

SHOCK ABSORBER ASSEMBLY................................................................................................................................................24

EXPLODED VIEW OF THE ROCKER..........................................................................................................................................25

MOTOR ASSEMBLY ...................................................................................................................................................................26

CHAINSTAYS AND SEATSTAYS PROTECTOR ........................................................................................................................27

CHAIN GUARD FOR CHAINSTAY .............................................................................................................................................27

SPEED SENSOR MAGNET ........................................................................................................................................................28

CABLING OF THE MECHANICAL PARTS ................................................................................................................................29

CABLING OF THE MECHANICAL PARTS ................................................................................................................................30

CABLING OF THE ELECTRICAL SYSTEM'S PARTS................................................................................................................31

CABLING OF THE ELECTRICAL SYSTEM'S PARTS................................................................................................................32

WIRING DIAGRAM OF THE ELECTRICAL SYSTEM'S PARTS.................................................................................................33

10 DECLARATION OF CONFORMITY ............................................................................ 34

11 HELP AND ADDITIONAL RESOURCES...................................................................... 34

CONTENTS

ATOMe 2024

BH 3

01 INTRODUCTION

This user manual contains important information for proper use and maintenance of the bicycle. In particular,

thisdocument contains specific information about the ATOMe (ES434, ES454, ES474, ES484, ES494, ES524, ES534,

ES624, ES804, ES824). Please read the entire manual carefully. The user manuals of all BH models can be consulted

on the website at the following address:

https://www.bhbikes.com/manuals

Keep in mind that the manuals on the BH BIKES website are updated on a regular basis. Make sure you have downloaded

the latest version from the website. You can check the version on the front page.

This document contains additional information to the general user manual, available at:

https://www.bhbikes.com/es_INT/quienes-somos/manuales-descargas

You can check the characteristics, recommendations and warranties of third-party parts on their corresponding

official websites.

SYMBOLS

This document contains different icons that refer to use, maintenance and assembly warnings. Carefully read the

meaning of each one to prevent improper handling or hazardous situations that may result in serious personal injuries

or fatal accidents.

SAFETY

DANGER: refers to a hazardous situation that, if not avoided, will lead to serious injuries or even

a fatal accident.

WARNING: refers to a hazardous situation that, if not avoided, could lead to serious injuries

oreven a fatal accident.

RISK OF ELECTRIC SHOCK: refers to a hazardous situation that, if not avoided, could cause

serious injuries due to electric shock or even death.

ATTENTION: refers to a hazardous situation that, if not avoided, could cause minor or moderate

injuries.

RISK OF SHORT CIRCUIT: refers to a hazardous situation that, if not avoided, could cause

short circuits in the electrical components. Short circuits may cause damage to the electrical

components and fire.

TOOLS

TYPE OF ASSEMBLY COMPOUND

FLAT WRENCH

OIL: light lubrication for elements such as chains and cables.

ALLEN KEY

GREASE: assembly grease.

PHILLIPS SCREWDRIVER

ADHESIVE: use medium strength thread lock.

TORX KEY

CARBON PASTE: assembly paste used to increase the friction of the carbon elements.

Adhesive is used to fasten bolts and make sure that they do not come loose due to

vibrations when using the bicycle. Add a drop of thread lock to the tip of the screw thread

in all cases. Never apply more than one drop around the thread, since this will make

itvery hard to remove the bolt.

TIGHTENING TORQUES: on one side of each tool symbol, the

tightening torque will be indicated in newton metre.

10Nm

ATOMe 2024

BH 4

02 BH WARRANTY

BH BIKES undertakes to offer long-lasting bicycles, in compliance with the highest standards of quality.

Therefore,inaddition to the statutory warranty, BH BIKES offers an additional coverage and warranty. Thissection

defines the different types of warranty and the process that must be followed to register for the additional

"LifeTime Frame" warranty.

STATUTORY WARRANTY

The statutory warranty covers the original purchaser in the event of manufacturing defects and/or non-conformities.

This warranty applies to frames and components manufactured by BH BIKES. The warranty period will be established

according to the current laws of the country where the bicycle was purchased, and will start on the date of purchase.

During this period, the holder of the warranty will be entitled to have all manufacturing defects repaired or replaced

free of charge, including the reimbursement of transport expenses and any losses caused as a result of this.

Differentconditions must be met in order to be covered by the warranty:

•

This warranty does not affect the consumer's applicable rights, according to the current laws in each country.

•

Faulty bicycles or parts will be covered by warranty upon the decision of our Technical Service.

•

The warranty does not include the replacement of parts prone to wear and arising from normal use of thebicycle.

•

The warranty does not cover defects or broken parts due to improper use of the bicycle, use for competitions,

mounting of non-original accessories or improper handling and incorrect maintenance work.

•

The warranty does not apply if the inspection before delivery and the corresponding inspection intervals included

in this document have not been carried out, observed, documented as required and stamped by an authorised

BH dealer.

•

Should the repair not be satisfactory and not ensure that the optimum conditions are met according to the

intended use, the holder of the warranty will be entitled to request the replacement of the purchased item

orfaulty part with one of identical characteristics, or to receive a refund of the amount paid for the damaged

item or part.

•

The warranty period will be interrupted during the repairs or, in the event of replaced items or components,

itwill be renewed.

•

Any claim against this warranty shall expire six months after the end of the warranty validity period.

•

All warranty claims must be processed by an authorised dealer.

•

Geographical scope: refer to the User Manual or www. BHbikes.com

LIFETIME FRAME WARRANTY

Through its authorised stores, BH Bikes provides the original buyer with a commercial policy to cover any manufacturing

defects in frames for a period beyond that specified in the product's statutory warranty, pursuant to the following

clauses:

The LIFETIME warranty solely applies to BH frames and bikes that are sold through stores that are authorised

by BHBIKES EUROPE S.L.

•

The buyer must register the LIFETIME warranty online, with the information duly completed, within 30calendar

days of the purchase date, as it appears on the invoice issued by the authorised store.

•

This warranty cannot be transferred to subsequent buyers and it is cancelled when the bicycle is sold

toathird party. Original buyer means the individual who registers the warranty at the time of the purchase;

the commercial warranty cannot be transferred to third parties who are not the original buyer.

•

It shall be compulsory to have the bicycle serviced in an establishment that is authorised by BHBIKES

EUROPE and according to the instructions in the user manual.

The LIFETIME warranty does not cover:

•

The rear swingarms of the double suspension models, fork, kids' bikes, defects and/or fading of the original

paint, or rust caused by natural deterioration.

•

Defects or breakages resulting from an accident or improper and/or negligent use of the bicycle.

•

When components or accessories that are not intended for or are not compatible with the use for which the

bicycle was designed have been installed.

•

Defects resulting from improper handling.

•

Scratches, discolouration, or stains caused by the use of abrasive fluids, sharp items, clamps and/or

prolonged exposure to sunlight or other weather conditions.

•

Defects caused by the bicycle's normal wear and tear, including those due to material fatigue. Fatigue damage

is a sign that the frame has been damaged by normal use, so it is the user's responsibility toregularly inspect

the bicycle.

•

Improper use and/or maintenance of the product (carefully read the recommendations for use and cleaning).

•

Frames that have been used in competitions, demos or as rentals.

Read the full terms and conditions at:

https://www.bhbikes.com/es_INT/registro-garantia-vida-bh/registra-tu-bici-garantia-de-por-vida

Visit the following link to read the terms and conditions:

https://www.bhbikes.com/es_INT/registro-garantia-vida-bh/registra-tu-bici-garantia-de-por-vida

02 BH WARRANTY

ATOMe 2024

BH 5

BHP01EB23056187

SERIAL NUMBER

REGISTERING EXTENDED WARRANTIES

You must register the bicycle within 30 days after purchase to enjoy the BH BIKES additional warranties. The process

to activate the extended warranties is described below:

•

LIFETIME FRAME WARRANTY + 5 YEARS WARRANTY ON BH ENGINES

You must register the bicycle on the BH BIKES website to enjoy the LIFETIME FRAME extended warranty:

https://www.bhbikes.com/es_INT/registro-garantia-vida-bh/registra-tu-bici-garantia-de-por-vida

Watch this video to find out what you need to do:

•

EXTENDED WARRANTY FOR BH BATTERIES

You must register the bicycle on the BH BIKES website to enjoy the BH BATTERY extended warranty:

https://www.bhbikes.com/es_INT/registro-garantia-vida-bh/extension-garantia-bateria

Watch this video to find out what you need to do:

https://youtu.be/47aLVgUI248

https://youtu.be/slNzdFBygMM

The serial number required to register the bicycle is located on the bottom of the bicycle, on the seat tube,

above the bottom bracket:bottombracket:

EXTENDED WARRANTY FOR BH BATTERIES

In a constant effort to improve our customer services on a daily basis, BH offers the best warranty conditions and

the possibility of acquiring an extended warranty for its e-Bike range (an additional one or two years). Through its

authorised stores, BH Bikes provides the original buyer with a commercial policy to cover any manufacturing defects

in BH batteries for a period beyond that specified in the product's statutory warranty, pursuant to the following

clauses:

The BH battery extended warranty solely applies to BH batteries installed in BH bikes and sold through stores

that are authorised by BHBIKES EUROPE S.L:

•

The buyer must register the warranty online, with the information duly completed, within 30 calendar days

of the purchase date, as it appears on the invoice issued by the authorised store, on which the bike's serial

no. must be specified.

•

This warranty cannot be transferred to subsequent buyers and it is cancelled when the bicycle is sold

toathird party. Original buyer means the individual who registers the warranty at the time of the purchase;

the commercial warranty cannot be transferred to third parties who are not the original buyer.

•

It shall be compulsory to have the bicycle serviced in an establishment that is authorised by BHBIKES and

according to the instructions in the user manual.

The BH battery extended warranty shall not ever cover:

•

Fading paintwork and a loss of original colour, or corrosion caused by normal wear and tear.

•

Defects or breakages resulting from an accident or improper and/or negligent use of the bicycle.

•

Deterioration or natural degradation due to age, even without use. Deterioration after 500 full charging and

discharging cycles if it is below 30% of the nominal capacity (read the recommendations in the user manual

carefully).

•

When components or accessories have been installed that are not intended for/compatible with the use for

which the bicycle was designed.

•

Defects resulting from improper handling.

•

Scratches, discolouration, or stains caused by the use of abrasive fluids, sharp items, clamps and/or

prolonged exposure to sunlight or other weather conditions.

•

Improper use and/or maintenance of the product (carefully read the recommendations for use and cleaning).

•

Batteries that have been used in competitions, demos or in rentals.

•

Auxiliary batteries (extenders).

Read the full terms and conditions at:

https://www.bhbikes.com/es_INT/registro-garantia-vida-bh/extension-garantia-bateria

02 BH WARRANTY

ATOMe 2024

BH 6

02 BH WARRANTY

SUBMITTING A WARRANTY CLAIM

All warranty claims must be channelled through an official BH dealer. The dealer will analyse the claim to identify its

scope and perform a preliminary assessment of the incident. The dealer will submit and process the claim directly

with BH. Once BH has defined the corrective measures required, the dealer will send this information to the customer.

All claims must be processed by the official dealer from which you purchased your bicycle. If this is not possible,

please contact us directly. We will help you find an authorised dealer near you:

https://www.bhbikes.com/es_INT/quienes-somos/contacto

WARRANTY OF PARTS OF THE ELECTRICAL ASSISTANCE SYSTEM

As in the case of BH BIKES frames and parts, all electrical components made exclusively for BH will be covered by the

statutory warranty (BH motors feature an extended 5-year warranty after the LIFETIME FRAME warranty is activated).

The warranty period will be established according to the current laws of the country where the bicycle was purchased,

and will start on the date of purchase.

During this period, the holder of the warranty will be entitled to have all manufacturing defects repaired free ofcharge,

including the reimbursement of transport expenses and any losses caused as a result of this. The terms and conditions

are as described in the section "Statutory Warranty" and can be read at:

https://www.bhbikes.com/manuals

Under no circumstances shall the warranty cover the wear and natural ageing of batteries due to use, charging and

storage. Likewise, the buyer must contact the original manufacturer to use the warranty of third-party parts.

CONDITIONS THAT MAY VOID THE WARRANTY OF ELECTRICAL

COMPONENTS

The BH battery and electrical components are covered by the statutory warranty, but the following requirements must

be met:

•

No electrical components must be removed or tampered with.

•

The service life will vary according to the use, charging and storage conditions.

•

Keep the battery charged at all times. Otherwise, the battery may deteriorate faster than normal.

This user manual contains important information for ATOMe (ES434, ES454, ES474, ES484, ES494, ES524, ES534,

ES624, ES804, ES824). Please read the entire manual carefully. The user manuals of all BH models can be consulted

on the website at the following address:

https://www.bhbikes.com/manuals

This document contains additional information to the general user manual, available at:

https://www.bhbikes.com/manuals

You can check the characteristics and recommendations of third-party parts on their corresponding official websites.

03 MAINTENANCE

INSPECT THE BICYCLE BEFORE USE

Bicycles are inspected several times throughout the manufacturing process and then at the BH workshop during the

final check. As the bicycle's operation may be affected during transport or third parties may have modified the bicycle

before its sale, the following must be checked before each trip:

•

FRAME: no cracks, damage or strange noises.

•

CHAIN: it must be lubricated and the transmission system must not make any strange noises.

•

BRAKES: the brakes must be working properly. When stopped, press the brake lever with enough strength and

check that it does not touch the handlebars.

•

TYRES: the pressure must be correct and there must be no cuts on the tread or on the sides. Also check that

the wear level does not exceed the maximum recommended level.

•

WHEELS: the wheels must rotate freely in order to check how they rotate. Also check the space between the

brake lining and the rim, as well as the space between the frame and tyre.

•

STEERING: the steering must turn smoothly and with no strange noises.

•

SWINGARM ROTATION POINTS: when weight is exerted on the bicycle, the suspension must work as expected

and with no strange noises. If it is not working properly or there is play between the moving parts, this might

mean that the tightening torques are incorrect or that the bearings are worn.

•

BEARINGS: the bearings must work properly and with no strange noises. The bearings are subject to wear and

must be replaced to prevent damage to the components on which they are installed.

•

ELECTRICAL SYSTEM: if the bicycle features an electrical system, check that it is functioning properly

byensuring that the electrical assistance mode is running and that all parts are functioning properly (motor,

display, change of assistance mode and speed sensor). If there is no electrical assistance, check that all

connections are correct and show no signs of damage.

ATOMe 2024

BH 7

03 MAINTENANCE

KEEP THE BICYCLE CLEAN

We recommend you follow these basic prevention measures to make sure that the bicycle is in perfect working

order. Failure to observe these recommendations may lead to premature wear or even breakages in specific areas,

suchasgaskets or moving parts.

•

Clean the dust and mud with a damp sponge and a gentle and neutral cleaning product.

•

Plastic parts must only be washed with soapy water.

•

Tyres can be washed with a sponge or brush and soapy water.

•

After cleaning the bicycle, dry it by rubbing it firmly with a smooth cloth.

•

After each cleaning, lubricate the transmission elements.

Dirt may cause damage that can result in accidents or even death.

Never use pressure washers or steam cleaners.

Do not ride your bicycle if it does not meet any of these points! A faulty bicycle may cause serious accidents!

If you are unsure or have any queries, please contact your nearest BH workshop!

Check the tightening torques to make sure that they are as described in the recommendations in the user

manuals. Failure to observe these recommendations may result in accidents and even death.

The effect of the ground and the forces exerted on the wheel subject the bicycle to a lot of stress. Thedifferent

parts will be subject to fatigue and wear because of these dynamic loads. Check the bicycle at regular

intervals to look for signs of wear, scratches, bent parts, wear on the finish or the formation of cracks.

Parts may fail suddenly after their service life has expired. Take your bicycle to an authorised BH workshop

regularly to have these parts replaced if needed.

KEEP THE TRANSMISSION LUBRICATED AT ALL TIMES

After washing the bicycle, the chain transmission's lubrication may have also been washed off. Inspect and lubricate

the chain's links, if needed. Excess lubrication may attract more dirt, causing premature wear and incorrect functioning

of the system.

Never use pressure washers or steam cleaners.

PART MAINTENANCE

The bicycle requires regular maintenance and a minimum number of regular inspections. The frequency of the

maintenance operations depends on the type of vehicle (leisure, road or mountain bike), as well as the frequency and

conditions of use.

PART MAINTENANCE CALENDAR

Lighting Functional check.

Tyres Pressure check.

Inspect the height of the profile and sides.

Brakes (on the rim) Check the lever travel, lining strength and rim position.

Brake test when stopped.

Clean the brake pads.

Brake cables Visual inspection.

Brakes (disc brakes) Change the brake fluid (DOT fluid).

Suspension fork Check the bolts and the corresponding tightening torque.

Change the oil and lubricate the elastomer.

Saddle seat post with

suspension Maintenance.

Play check.

Rims on rim brakes Inspection and replacement, if needed, of the wall

linings. At the latest after the second part of the

brake lining.

Bottom bracket axle Check the play.

Re-lubrication.

Chain Check and lubrication.

Check and replacement. After 800 km.

Chainsets Check and tightening.

Wheels / Spokes Check wheel spin and spoke tension.

Headset Inspection of the headset.

Re-lubrication.

Metal surfaces Maintenance. At least once every six months.

Hubs Bearing inspection.

Re-lubrication.

Pedals Bearing inspection.

Lubrication, cleaning the anchoring mechanism.

Before each outing Monthly Annually

Action required

Part

ATOMe 2024

BH 8

03 MAINTENANCE

Saddle seat post / Stem Inspection of the fastening screws.

Rear derailleur /

Derailleur Cleaning, lubrication.

Quick-release

mechanism / Thru-axle Efficacy check.

Nuts and bolts Check and tightening.

Spokes Tension check.

Stem / Saddle seat post Removing and applying new assembly paste.

Circuit / Brakes Disassembly and greasing.

Components of the

electrical assistance

system

Check the connections.

Check there is no dirt.

Before each outing Monthly Annually

Action required

Part

You do not need to take the bicycle to an expert if you are skilled, experienced and have the appropriate tools. Immediately

implement the corrective measures if you detect problems. If you are unsure or have queries, please contact BH.

The tasks described above must only be carried out by a trusted bike repair expert.

SPARE PARTS

Original parts must be used to ensure the optimum performance of your bicycle and the utmost safety. Failure to use

original parts may cause damage that is not covered by the warranty.

The most common spare parts are parts prone to wear. The most common ones are tyres, inner tubes, brake pads,

disc brakes and brake pads, as well as rims, when these are part of the brake unit, headlights, position lights,

batteries and accumulators.

•

TYRES: Replace them with an equivalent type of tyre. Check the marking on the outside of the tyre

(ETRTOstandard). Keep in mind that using a tyre with a larger outer diameter than the recommended one may

cause the tip of the foot to touch the front wheel or rear wheel guard when the handlebars turn. The cyclist may

lose control of the bicycle and suffer an accident with serious consequences. This can also occur when the

pedal chainset is replaced with a longer one.

•

INNER TUBES: Replace them with a suitable type of inner tube, according to the type of tyre. Refer to the

information on the outside of the inner tube (ETRTO standard).

•

DISC BRAKES AND BRAKE PADS: Follow the instructions supplied by the manufacturer.

•

HEADLIGHTS AND POSITION LIGHTS: Replace the bulb with one of the same type. Check the indication on the

metal area.

•

CHAIN, COG AND CHAIN RINGS: Follow the instructions supplied by the manufacturer.

•

BATTERIES AND ACCUMULATORS: Change for the same type. Check the indication on the outer area.

Remember that the failure to use original parts may cause damage that is not covered by the warranty.

AFTER A FALL, BLOW OR IMPACT

If you suffer a fall, blow or impact, first make sure that you are okay to continue cycling. Do not use the bike if you

are injured and ask for medical assistance if needed.

If you are okay to continue cycling, check the bicycle to make sure that it is in perfect working order:

•

Check that the wheels are firmly secured and that the rims are in the centre of the frame and fork. Turn the

wheels. If they cannot be centred in situ because the gap is too small, separate the brakes from the rim so itcan

move freely.

In this case, keep in mind that the braking efficacy will be less.

•

Check whether the handlebars or the front of the frame are twisted or broken. Check that the front is firmly

seated on the fork, holding the front wheel firmly between your legs and trying to twist the handlebars with

respect to the front wheel.

•

Check that the chain is fitted correctly. If the bicycle fell onto the transmission side, check that it is working

properly. Ask for help to place the bicycle on its saddle and change gears. When the chain fits on the largest

cog, check the distance between the gear and the spokes. If the gear or bracket are bent, the first one may

become stuck on the spokes - Danger of falling! The gear, rear wheel or frame may be damaged. Check the

derailleur. If it has shifted, the chain may come off the gear. The bicycle's transmission will become less

effective (alsorefer to the "Traction" section).

•

Check the saddle, upper tube or the bottom bracket box to make sure that there are no defects.

•

Lift the bicycle slightly and let it drop onto the ground. If there are any noises, inspect the bicycle for any

loosebolts.

•

Inspect the entire bicycle again to check for bent areas, worn finish or cracks.

•

Ride again carefully if no problems have been detected during the inspection. Do not brake or accelerate

suddenly or pedal when going uphill. If you are unsure, wait for a car to pick you up instead of risking an

accident. Once home, you should inspect the bicycle carefully again. If you are still unsure or have any queries,

please contact your nearest BH workshop!

Bent aluminium parts must not be straightened, i.e., they must not be repaired. Even afterwards, thereisahigh

risk of breakage, especially in regards to the fork, handlebars, front part, chainsets and pedals. Replace them

for greater safety.

ATOMe 2024

BH 9

03 MAINTENANCE

05 WARNINGS ON USE OF THE ELECTRICAL

ASSISTANCE SYSTEM

CARE AND INSTRUCTIONS FOR USE OF THE ELECTRICAL

COMPONENTS AND BATTERIES

All BH products and parts have been designed to withstand splashed liquids and rain. However, some practices may

cause damage to the parts and short circuits. Do not do the following:

•

Wash the bicycle with pressure devices.

•

Use the bicycle under adverse weather conditions.

•

Transport the bicycle on the outside of a vehicle when it is raining.

•

Expose the batteries to very high temperatures. If the temperature exceeds 70ºC, this could cause leaks and

there could be a risk of fire.

•

Fail to observe the working temperature, storage and charging range of the bicycle.

WARNINGS ON THE USE OF BATTERIES

Improper use of the batteries may cause damage and serious accidents. Follow these recommendations to preventthis:

•

Always use the original battery charger.

•

Never leave the battery near sources of heat.

•

Do not heat the battery or throw it into a fire.

RECOMMENDATIONS TO MAXIMISE THE BATTERY LIFE

We recommend the following to maximise the battery life:

•

Charge it on a flat and stable surface.

•

Make sure that it is not exposed to direct sunlight.

•

Make sure that there are no children or pets near.

•

Make sure that there is no rain or dampness.

•

The place must be well ventilated and dry.

•

The temperature must be between 15-25°C.

•

Do not use the battery with a charge of less than 10%. The useful life of the cells may be affected below this

charge level.

Any unauthorised handling of the electrical system's components may cause serious accidents and will void

the warranty.

04 WARNINGS ON USE

MAXIMUM TYRE SIZE

If you install a tyre of a different size on your bicycle, check and make sure that there are at least 6 mm between the

tyre and other parts of the frame and fork.

MAXIMUM FORK LENGTH (AXLE-TO-CROWN)

Observe the maximum length between the fork axle and the lower part of the steering tube (axle-to-crown). If this

maximum length is not observed, the frame could be damaged due to withstanding a greater load than that for which

it was designed and may cause serious accidents.

POSITION OF THE SPINDLE INSIDE THE FORK TUBE

No steering spacers must be fitted above the stem. Otherwise, the materials could be damaged due to withstanding

a greater load than that for which they were designed and may cause serious accidents.

MINIMUM AND MAXIMUM INSERTION LENGTH OF THE SEAT POST

Failure to observe the maximum and minimum seat post insertion dimensions indicated in this manual may cause

alever effect on the frame. The pressure exerted could damage the frame and cause serious accidents. The warranty

does not cover the damage generated by failing to observe these indications.

MAXIMUM NUMBER OF STEERING SPACERS

This manual specifies the maximum number of steering spacers that can be fitted under the stem. If this maximum

quantity is not observed, the materials could be damaged due to withstanding a greater load than that for which they

were designed and may cause serious accidents.

INTENDED USE

Each bicycle has been designed according to a specific intended use. The models described in this manual meet the

requirements associated with their intended use:

ES804, ES824:Trail.

ES624:Sport, mixed use between mountain, trails and roads.

ES434, ES454, ES474, ES484, ES494, ES524, ES534:Designed for city use.

ATOMe 2024

BH 10

05 WARNINGS ON USE OF THE ELECTRICAL ASSISTANCE SYSTEM

06 PEDAL ASSISTANCE SYSTEM OPERATION

PEDAL ASSISTANCE SYSTEM

The pedal assistance system is designed to provide the optimal amount of assisted power. It provides assistance

within a standard range, based on factors such as the pedalling force, the speed of the bicycle and the transmission.

The system does not provide assistance in the following situations:

•

If the control panel is off.

•

When travelling at 25 km/h or faster.

•

If you are not pedalling and the throttle function is released at 6 km/h.

•

If there is no remaining battery capacity.

•

If the assistance mode selected is 0% assistance.

COMPONENTS OF THE PEDAL ASSISTANCE SYSTEM

The BH Bikes pedal assistance system is made up of the following components:

•

A. A motor, which drives the bicycle.

•

B. A control unit, which, among other things, allows you to select the assistance mode.

•

C. A battery, which powers the motor and can be located in different places.

•

D. A torque sensor, which reads the force applied to the pedal by the user.

UNSUITABLE CHARGING AND DISCHARGING ENVIRONMENTS

ANDSOLUTIONS

The hot and cold environments described below may lead to charging entering standby or sleep mode without fully

charging the battery.

•

Winter discharging sleep mode or DUT (Discharge Under Temperature): Battery discharging will enter the

deep sleep mode if the temperature is below -20°C, stopping the pedal assistance system from working and

protecting the battery. In such cases, sleep mode will automatically be disabled when the battery exceeds

-20°C.

•

Winter charging sleep mode or CUT (Charge Under Temperature): Battery charging will enter sleep mode ifthe

temperature is below 0°C. If charging starts and the temperature falls below this level due to night cooling

orother factors, charging will stop and sleep mode will be activated to protect the battery. In such cases,

sleepmode will automatically be disabled when the battery exceeds 0°C.

•

Noise on televisions/radios/computers: Charging near televisions, radios or similar devices may cause static

electricity, flickering images and other interference. If this happens, recharge somewhere that is away from the

television or radio (e.g. in another room).

RECYCLING

Ion-lithium batteries can be recycled but they may harm the environment if they are not managed properly after the

end of their service life. Follow these steps after the end of their service life:

•

Classify and recycle each electrical component in a place prepared for the sustainable recycling of such parts.

•

Check and make sure that the applicable regulations of your country are observed with regards to batteries.

•

Prevent the battery connections from coming into contact with metal objects.

•

Do not submerge the battery in water and prevent splashes and dampness.

•

Do not hit or drill holes into the battery.

•

Make sure that the battery liquid does not touch your hands or eyes in the event of a leak.

•

Do not use it if there are external signs of damage.

•

Only clean the battery with a dry or damp cloth.

MOTOR

The DC motor is located on the bottom bracket axle. The motor's service life depends on its use, as in the case ofany

other part of the bicycle. Under normal conditions, the motor can last for 10 to 20 years, or up to 100,000 km.

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali BH bikes Bicicletta

BH bikes

BH bikes e-motion Manuale utente

BH bikes

BH bikes ATOM Manuale utente

BH bikes

BH bikes e-motion ATOMX 2019 Manuale utente

Manuali Bicicletta popolari di altre marche

RAMBO

RAMBO R1000X2M-FF-BFD Manuale utente

Vermeiren

Vermeiren SAFARI Manuale utente

Velec

Velec A2/36V Manuale utente

Coswheel

Coswheel A-ONE Manuale utente

Betzold

Betzold 97869 Manuale utente

Cervélo

Cervélo S3 2019 Manuale utente

Tenways

Tenways AGO X Manuale utente

Festo

Festo EGSC-BS-KF Manuale elenco delle parti

Gio Electric

Gio Electric H1 Volt Manuale utente

GOGOBEST

GOGOBEST GM30 Manuale utente

DAHON

DAHON CIAO - 2009 Manuale utente

Aprimatic

Aprimatic ONDA 500 Guida rapida

MV Agusta

MV Agusta Lucky Explorer GRAVEL Manuale di istruzioni

Greyp

Greyp G6 Series Manuale utente

Babboe

Babboe Carve-E Manuale utente

Huka

Huka orthros Manuale utente

Xtracycle

Xtracycle Stoker 2021 Manuale utente

APRILIA

APRILIA DORSODURO 750 ABS 2015 Manuale utente