3
5.3.9 Auto Lower Turntable ..........................................................................................................27
5.3.10 Completing a Load .............................................................................................................27
5.4 Tipping a Full Load ......................................................................................................................28
5.4.1 Tipping up the trailer and manually releasing stack............................................................28
5.4.2 Stacking against previous stacks..........................................................................................30
5.4.3 Auto Open............................................................................................................................31
It’s advised that if you use this function, you need to be confident the stack is vertical and
secure before releasing it. If there are any doubts with stack stability, follow section 5.4.1
where you can manually release the stack in stages. To cancel the auto function when selected
by either option, simply move the joystick in any direction.........................................................31
5.4.4 Stack Side by Side.................................................................................................................31
5.4.5 Auto Tip Bed Down ..............................................................................................................32
5.4.6 Retrieving an erected Stack .................................................................................................33
6.0 Adjustments..............................................................................................................................36
6.1 Mechanical Adjustments ............................................................................................................36
6.1.1 Side Gate Pins position.........................................................................................................36
6.1.2 Pickup Height Plates for corresponding bale size................................................................37
6.1.3 Forks –bolting down/releasing............................................................................................38
6.1.4 Number of tines and their positioning.................................................................................38
6.1.5 Pickup Shoe adjustment.......................................................................................................39
6.1.6 Turntable Stop Adjustment..................................................................................................39
6.2 Stack Configurations ...................................................................................................................39
6.3 Settings Explained.......................................................................................................................40
6.3.1 Manual Settings ...................................................................................................................40
6.3.2 Auto Settings........................................................................................................................42
6.3.3 Speed/Angle Settings...........................................................................................................46
6.3.4 Additional Settings...............................................................................................................48
6.4 Sensor Adjustment and Calibration............................................................................................49
6.4.1 Potentiometer Sensors ........................................................................................................49
6.4.2 Calibration of Potentiometers .............................................................................................51
6.4.3 Inductive Switches and adjustment.....................................................................................51
7.0 Electrical and Hydraulic System................................................................................................54
7.1 Electrical System .........................................................................................................................54
7.1.1 Fusing locations and functions.............................................................................................54
7.2 Hydraulic System.........................................................................................................................54
7.2.1 Hydraulic Filters ...................................................................................................................55
