Bikecomm SALUT Manuale utente
1
Owner’s Manual
Bluetooth Helmet Headset
SALUT
2
1. Headset Buttons
M:
1.Play/Pause [cell phone music]
2. Redial last phone number
3. Cell phone voice dials
A: Select to Intercom with A1/A2/A3
V+: 1. Next track [cell phone music]
2. Volume up
V-: 1. Previous track [cell phone music]
2. Volume down
3
2. Recharge
1. Use Mini USB cable to recharge. During recharging, LED stays red. When
charged, LED stays blue. Headset battery is initially partially charged. Please
fully recharge the headset before the first use.
2. Low battery warning: When battery is low, 3 <beeps> can be heard (i.e.,
<beep><beep><beep>) is heard to remind the user to recharge.
4
3. Power ON/OFF
1. Power ON: Press both A and V- buttons simultaneously until LED stays blue and
release both button.
2. Power OFF: Press A and V- buttons simultaneously unit the LED stays red. A
voice notification can be heard to inform you the remaining battery capacity.
5
4. Pair with Cell Phone and Use
Pair with Cell Phone
1. Turn on SALUT, press M until the LED flashes red/blue alternatingly.
2. Ice name: SALUT, and connect. Activate cell phone Bluetooth. Search for
device SALUT and connect.
3. When asked for password, input <0000> (4 zeros). After connection, a voice
notification <Bluetooth device pairing complete> is heard, and the LED flashes
blue slowly to indicate successful pairing.
Use Cell Phone
1. Press M to answer incoming call.
2. When auto-answer is set, the incoming call will be automatically answered after
ringing for 10 seconds.
3. To end a call, press M once. or wait for the called person to end the call.
4. To reject a call, press M for 3 seconds. (Note: when auto-answer is off, the call is
automatically rejected after ringing for 16 seconds.)
5. Voice dial: Press M once and speak into the phone (cell phone must provide
voice dial function.)
6.
Redial last number
: Press M twice rapidly, the cell phone will redial the last
call-out number.
7. When paired with two cells phones to redial the last number on the second cell
phone, press M 3 times rapidly.
8. To reconnect cell phone, press M to reconnect. (When paired with two cell
phones, both cell phones are reconnected.)
6
9. When connected to two cell phones if the second cell phone has an incoming call
during the first cell phone talk, press A to answer the incoming call on the
second cell phone and hold the first cell phone. When the call on the second
phone ends, the headset will resume the first cell phone.
10. Set Auto-Answer: Hold both M and V+ for 8 seconds. A voice notification <cell
phone answer mode> <automatic answer> can be heard to indicate successful
setting.
11. Disable Auto-Answer: Hold both M and V- for 8 seconds. A voice notification
<cell phone answer mode> <manual answer> can be heard to indicate
auto-answer is disabled.
12. Cell phone music (AVRCP)
Play/Pause: press M for 2 seconds.
Next track: press V+ twice.
Previous track: press V- twice.
13. Cell phone Volume
Volume UP: press V+.
Volume DOWN: press V-.
When adjusting volume, a sound <dun-dun> can be heard. When reach the
maximum or minimum volume, a <beep> tone can be heard. To adjust cell phone
and headset volume, the cell phone function must be activated and the cell phone
must be in talk or in music play mode.
7
5. Pair with Headset for Intercom and Use
Two SALUT headsets must be paired for 1-on-1 intercom.Each SALUT can
connect to 3 (at most) other SALUT headsets for 1-on-1 intercom. The three
SALUT headsets will be defined, according to the reverse time order they were
paired, as: (i.e., the most recently paired has the highest priority)
first priority: “Comm A1”, second priority: “Comm A2”, and third priority: “Comm
A3” 。
Pair with headset
1. SALUT headset#1 is turned on, pressed A until the LED flashes blue rapidly.
2. SALUT headset#2 is turned on, press M until the LED flashes red/blue
alternatingly and rapidly.
After the above two steps, the two headsets will automatically pair with each
other until the LED on both headsets flashes blue At this point, two headsets
can intercom with each other directly and both headsets can hear a voice
notification <headset A pairing completed>.
5.1 1-on-1 Intercom Usage
Paired SALUT headsets for 1-on-1 intercom can start intercom transmission in
two modes:
Manual mode and VOX mode.
The default mode when SALUT headsets are shipped is manual mode. When
SALUT is powered on, the user will hear “
VOX sensitivity
Manual Mode”
Manual Mode for starting 1-on-1 Intercom:
The SALUT headsets already paired for 1-on-1 intercom can use [A] to select
one of the three headsets recorded in the list, as follows:
8
Press [A] once to start 1-on-1 intercom with A1; press [A] twice to start 1-on-1
intercom with A2; and press [A] three times to start 1-on-1 intercom with A3.
Manually Ending 1-on-1 Intercom
During 1-on-1 intercom, any of the tow headsets can press [A] once to end the
intercom.
VOX Mode
SALUT provides four sensitivity levels for VOX to start 1-on-1 intercom to
accommodate for different speeds and ambient noise levels.
VOX Usage
Using VOX to start 1-on-1 intercom will connect you to the last intercom
SALUT partner.
During intercom, the 1-on-1 intercom will be automatically end after a
15-second silence on both parties. If any member of the party speaks into the
microphone, the 1 on 1 intercom connection will be restarted.
NOTE: VOX only connects you to the last intercom partner. To intercom with a
different partner for 1-on-1 intercom, you must manually start the 1-on-1
intercom.
5.2 Voice Activation (VOX)
VOX Level:
The SALUT headset provides five volume levels for setting the voice volume
required to activate the intercom connection. It is possible to adjust the
required voice volume according to your needs. Level 1 means that VOX has a
lower activation threshold, i.e., you may use a lower voice volume to activate
the headset intercom connection. The higher the level is, the higher the voice
volume required to activate the intercom connection. The indicated speeds are
only for reference, and level selection depends on actual ambient noise levels
and wind speed.
9
Level 5 is also the manual mode:
VOX Level Control:
1.
Turn SALUT headset on (i.e., ready to connect) without transmitting any
voice signals (i.e., turn off cell phone music playback and FM, and stay
silent for 15 seconds to leave the intercom mode).
2.
Press [P] upward or downward for 2 seconds to adjust and then release [V].
Different voice notifications will be provided to indicate the transition from
a level to a different level. The following gives the details:
VOX Level 1
Description: When in VOX activation Level 1, a voice notification saying “VOX
sensitivity Level 1”.
Note: if ambient wind can activate the intercom, noise sensitivity is too great so
a higher level must be used.
VOX Level 2
Description: When adjusting to Level 2, a voice notification saying “VOX
sensitivity Level 2”. Note: if ambient wind can activate the intercom, noise
sensitivity is too great so a higher level must be used.
VOX Level 3
Description: When adjusting to Level 3, a voice notification saying “VOX
sensitivity Level 3”. Note: if ambient wind can activate the intercom, noise
sensitivity is too great so a higher level must be used.
VOX Level 4
Description: When adjusting to Level 4, a voice notification saying “VOX
sensitivity Level 4”, and when adjusting to Manual Activation Mode, a voice
notification saying “VOX sensitivity Manual Mode”.
Manual activation mode (default)
Description: “Manual activation mode” you must activate the intercom
manually. When adjusting to Manual Activation Mode, a voice notification
saying “VOX sensitivity Manual Mode”, which means the VOX activation mode
is restored.
10
The headsets already paired for 1-on-1 intercom can use [A] to select intercom
During 1-on-1 intercom, any of the two headsets can press [A] once to end the
intercom.
VOX Level Control:
3.
Turn SALUT headset on (i.e., ready to connect) without transmitting any
voice signals (i.e., turn off cell phone music playback, and stay silent for
15 seconds to leave the intercom mode).
4.
Press [V+] or [V-] twice to raise or lower the voice level.
Different voice
notifications will be provided to indicate the transition from a level to a
different level. The following gives the details:
VOX Level 1
Description: When in VOX activation Level 1, a voice notification saying “VOX
sensitivity Level 1”.
Note: if ambient wind can activate the intercom, noise sensitivity is too great so
a higher level must be used.
VOX Level 2
Description: When adjusting to Level 2, a voice notification saying “VOX
sensitivity Level 2”. Note: if ambient wind can activate the intercom, noise
sensitivity is too great so a higher level must be used.
VOX Level 3
Description: When adjusting to Level 3, a voice notification saying “VOX
sensitivity Level 3”. Note: if ambient wind can activate the intercom, noise
sensitivity is too great so a higher level must be used.
VOX Level 4
Description: When adjusting to Level 4, a voice notification saying “VOX
sensitivity Level 4”, and when adjusting to Manual Activation Mode, a voice
notification saying “VOX sensitivity Manual Mode”.
Manual activation mode (default)
Description: “Manual activation mode” you must activate the intercom
manually. When adjusting to Manual Activation Mode, a voice notification
saying “VOX sensitivity Manual Mode”, which means the VOX activation mode
Altri manuali per SALUT
1
Indice
Altri manuali Bikecomm Cuffia
