Activation of the tracker
To activate your BikeFinder tracker, you must do
the following steps:
1. Make sure Bluetooth is activated on your phone.
2. Open the app.
3. Click the + sign in the top right corner of the app.
4. Select your tracker from the list of trackers nearby.
4.1 If the tracker does not show on the list,
try to shake the tracker.
5. After the tracker is added, the app will automatically
connect it to your purchased subscription.
When your tracker is successfully connected
to a subscription, the credit card sign will turn
green in your BikeFinder App.
Tip: lf your BikeFinder tracker has an inactive
subscription, check Buy a subscription Step 3.
Mount the tracker
lnsert the tracker into the handlebar. If the handlebar
diameter is bigger than 20 mm, then see page 12 (section
20 mm+ handlebar adapter set) for fitting expansion
adapter and spacer.
Lock the tracker in place
Fasten the screws using the BikeFinder tool. Tighten
the two screws evenly until tracker is locked in place.
Note: The expansion mechanism can damage
the interior of the handlebar if tightened to hard.
Tip: Inspect the fastening periodically and keep
the tightening torque between 0.4-0.5 Nm
to achieve optimal fastening result.
10
