Getting Started
! In order to initiate a connection between the BikeLogger and app, please ensure enough
energy is generated. Turn the bicycle’s wheel long enough to activate your LED light.
Connect your Smartphone
1. Install the BikeLogger app onto your smartphone. This can be found on the App Store.
2. Make sure your smartphone’s Bluetooth® is switched on.
3. Give your front-wheel a good spin to enable the BikeLogger. The device has been activated
once the LED lights up blue.
4. Connect with your Bikelogger by selecting “Preferences > Pair BikeLogger“ in your app
menu. The default PIN is “0000”.
Calibration
1. Select the menu item “Preferences > Calibrate BikeLogger“ in your BikeLogger app
2. Follow the instructions provided in the app.
Features
View your Journey
To view the default screen, choose “Start“ in your BikeLogger app, or simply spin your
front-wheel.
Please note the following indicators for displaying information during your active journey:
oRed needle: active speed
oOrange needle: average speed (of
active journey)
oAnalogue clock: active time
oDigital display (inside the analogue
clock): length (of active journey)
oCadence
oLength (of active journey)
ototal kilometre
oBluetooth®-Status: Blue =
connected, White = no connection
oactive outside temperature
View historical Data
Select “History“ in your BikeLogger app.
Speed, time and other parameters are diagrammed.
Anti-Theft Alarm
Swipe the default screen leftward to navigate to the Anti-Theft mode.
The BikeLogger will now notify you of any movement of your wheel, for approximately 30
minutes.
LED flashing sequence
Red flashing: If time not pre-set - please load your Smartphone’s BikeLogger app.
(Sufficient, if App runs in background).
On start, red LED means that energy buffer is charging. When full, blue LED is lighted shortly.
