Billion BiPAC 7404V series Manuale utente

BiPAC 7404V series

VoIP/(802.11g) ADSL2+

(VPN) Firewall Router

Quick Start Guide

VoIP/(802.11g) ADSL2+ (VPN) Firewall Router

For more detailed instructions on con

urin

and usin

Billion VoIP/(802.11g) ADSL2+ (VPN) Firewall

outer, please

refer to the on-line manual.

Package Contents

VoIP/(802.11g) ADSL2+ (VPN) Firewall Router

CD-ROM containing the online manual

RJ-11 ADSL/telephone Cable

Ethernet (CAT-5 LAN) Cable

Console Kit (RJ45-RS232)

A detachable antenna

AC-DC power adapter (12VDC, 1.2A)

This Quick Start Guide

 Do not use this router in high humidity or high temperatures.

 Do not use the same power source for this router as other

equipment.

 Do not open or repair the case yourself. If this router is too hot,

turn off the power immediately and have it repaired at a qualified

service center.

 Avoid using this product and all accessories outdoors.

Warning

 Place this router on a stable surface.

 Only use th

different voltage rating pow

e power adapter that comes with the package. Using a

er adaptor may damage this router.

ttention

Quick Start Guide

The Front LEDs

LED Meaning

1 PWR Lit when power is ON.

2 SYS Lit when the system is ready.

3 – 6 Lit when connected to an Ethernet device.

Green for 100Mbps; Orange for 10Mbps.

LAN Port

1X — 4X

(RJ-45 connector) Blinking when data is Transmitted / Received.

7 WLAN Lit green when the wireless connection is established.

(Wireless Router only) Flashes when sending/receiving data.

8 – 9 Phone

1X — 2X

(RJ-11 connector) Lit green when the phone is off-hook.

10 LINE

(Router with LINE port only) Lit when the inbound and outbound calls transmitted

through PSTN.

VoIP Port Lit when the SIP Registration is OK.

1X — 2X

(RJ-11 connector) Green for Phone 1; Orange for Phone 2.

13 ADSL/PPP

Lit Green when successfully connected to an ADSL DSLAM

(“linesync”).

Lit Orange when there is a PPPoA / PPPoE connection.

VoIP/(802.11g) ADSL2+ (VPN) Firewall Router

The Rear Ports

5 3

6 1

8 7

The LAN 4 can be connected to the computer and console cable. You need a special

console kit in this package to connect the LAN cable of Port 4 when connecting to a PC’s

RS-232 port (9-pin serial port).

Port Meaning

1 Power Switch Power ON/OFF switch

2 PWR Connect the supplied power adapter to this jack.

3 RESET

After the device is powered on, press it to reset the device or

restore to factory default settings.

1-3 seconds: reset the device

6 seconds above, and power off, power on the device: restore to

factory default settings (this is used when you can not login to

the router, e.g. forgot the password)

4 LAN

1X — 4X

(RJ-45 connector)

Connect a UTP Ethernet cable (Cat-5 or Cat-5e) to one of the

four LAN ports when connecting to a PC or an office/home

network of 10Mbps or 100Mbps.

Phone

1X ─2X

(RJ-11 connector)

Connect RJ-11 cable to this port when connecting to an analog

phone set.

6 LINE

(Router with LINE port

only)

Connect RJ-11 cable to this port when connecting to the

telephone wall jack.

7 ADSL Connect the supplied RJ-11 (“telephone”) cable to this port

when connecting to the ADSL/telephone network.

Antenna Connect the detachable antenna to this port.

8 (Wireless Router only)

Quick Start Guide

Connecting Your ADSL Router

1. Connect this router to a LAN (Local Area Network) and the ADSL/telephone (ADSL) network.

2. Power on the device.

3. Make sure the PWR and SYS LEDs are lit steadily and that the LAN LED is lit.

4. Connect an RJ11 cable to VoIP port when connecting to an analog phone set.

5. Connect RJ-11 cable to LINE Port when connecting to the telephone wall jack

Connect more

computers

Analog Phone

ADSL

Splitter

ADSL Phone

Line

Switching/

HUB

VoIP/(802.11g) ADSL2+ (VPN) Firewall Router

Configuring PC in Windows XP

1. Go to Start / Control Panel (in Classic

View). In the Control Panel, double-click on

Network Connections

2. Double-click Local Area Connection.

3. In the Local Area Connection Status

window, click Properties.

4. Select Internet Protocol (TCP/IP) and click

Properties.

5. Select the Obtain an IP address

automatically and the Obtain DNS server

address automatically radio buttons.

6. Click OK to finish the configuration.

Quick Start Guide

Configuring PC in Windows 2000

1. Go to Start / Settings / Control Panel. In the

Control Panel, double-click on Network and

Dial-up Connections.

2. Double-click Local Area Connection.

3. In the Local Area Connection Status

window click Properties.

4. Select Internet Protocol (TCP/IP) and click

Properties.

5. Select the Obtain an IP address

automatically and the Obtain DNS server

address automatically radio buttons.

6. Click OK to finish the configuration.

VoIP/(802.11g) ADSL2+ (VPN) Firewall Router

Configuring PC in Windows 98/Me

1. Go to Start / Settings / Control Panel. In

the Control Panel, double-click on Network

and choose the Configuration tab.

2. Select TCP/IP ->

NE2000 Compatible, or the name of your

Network Interface Card (NIC) in your PC.

3. Select the Obtain an IP address

automatically radio button.

4. Then select the DNS Configuration tab.

5. Select the Disable DNS radio button and

click OK to finish the configuration.

Quick Start Guide

Configuring PC in Windows NT4.0

1. Go to Start / Settings / Control Panel. In the

Control Panel, double-click on Network and

choose the Protocols tab.

2. Select TCP/IP Protocol and click Properties.

3. Select the Obtain an IP address from a

DHCP server radio button and click OK.

Altri manuali per BiPAC 7404V series

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Billion Router di rete

Billion

Billion BiPAC 7402GL R4 Manuale utente

Billion

Billion BiPAC 7402G R3 Manuale utente

Billion

Billion BiPAC 7402X Series Manuale utente

Billion

Billion BiPAC 7100SG Manuale utente

Billion

Billion BiPAC 7800 Manuale utente

Billion

Billion BIPAC-7402 Manuale utente

Billion

Billion BiPAC 5200G Series Manuale utente

Billion

Billion BiPAC 5200 RC Manuale utente

Billion

Billion BiPAC 7300N Manuale utente

Billion

Billion BiPAC 8800NL R2 Guida all'installazione

Billion

Billion BiPAC 5200W Manuale utente

Billion

Billion BiPAC 7402NXL Manuale utente

Billion

Billion BiPAC 8700NEXL R2 Manuale utente

Billion

Billion BiPAC 7300 Manuale utente

Billion

Billion BiPAC 7401V(G)PX Manuale utente

Billion

Billion (802.11g) ADSL2+ Modem/Router BIPAC 5102G Manuale utente

Billion

Billion BiPAC 7401VGP Manuale utente

Billion

Billion BiPAC 7404VNOX Manuale utente

Billion

Billion BiPAC 5210G RC Manuale utente

Billion

Billion BIPAC 7500 Manuale utente

Billion

Billion ADSL Modem / Router BIPAC-711C2 Manuale utente

Billion

Billion BiPAC 7402(G)X(L) Series Manuale utente

Billion

Billion BiPAC 7402VGO Manuale utente

Billion

Billion BiPAC 7401V(G)P R4 Manuale utente

Manuali Router di rete popolari di altre marche

Allnet

Allnet ALL0333AU Manuale utente

HomeSeer

HomeSeer HT-SEL Manuale utente

Sercomm

Sercomm Genesis OC3505D Manuale utente

TP-Link

TP-Link TD-8817 Manuale utente

Motorola

Motorola MR1900 Manuale utente

Digi

Digi IX14 Manuale utente

Cisco

Cisco NCS 540 Manuale

XAVi

XAVi X8821e Manuale utente

BEC

BEC 6200WZL Manuale utente

MikroTik

MikroTik hAP ac3 Series Manuale utente

Korenix

Korenix JetNet 5428G Series Manuale utente

NETGEAR

NETGEAR FS526T - Switch Manuale utente

Korenix

Korenix JetNet 5710G Series Manuale utente

Automated Logic

Automated Logic ZN551 Manuale del proprietario

Cisco

Cisco ASR 1000 Series Manuale dell'operatore

EnGenius

EnGenius ESR-9710 Manuale utente

Cisco

Cisco 805 Series Istruzioni operative e di sicurezza

LevelOne

LevelOne FBR-1416 Manuale utente