Bilt Nest x Yale Manuale utente
P/N RB-YRD540 Rev 2
1
Nest x Yale Lock Installation Guide
Tools Needed
Standard
Phillips Head
Screwdriver
Utility
Knife
Drill Wood
Mortise
Chisel
Pencil Tape
Measure Level
Tools Needed For New
Doors Or Adjusting Existing Door
Before you begin
Using the app on your smart
phone, scan this QR for step-by
-step installation instructions & to
register your lock
DOWNLOAD
THE BILT APP
This manual will walk you through all the required steps to add your new
Nest x Yale Lock to your door.
• Remove existing deadbolt
• Double check door measurements
• Install your Nest x Yale Lock
• Program your Nest x Yale Lock
• Add your Nest x Yale Lock to your Nest App
Failure to follow these instructions could result in damage to the product and void the factory warranty.
P/N RB-YRD540 Rev 2
2
Enter / Unlock
(Set / Continue)
Settings
Speaker
Failsafe 9 Volt
Battery Connection
(Use Alkaline battery)
Warning Status
Indicator
Back Button
Low Battery
Indicator
Key Free Touchscreen
Keypad
Mounting Hardware
Strike Plate Adjustable
Deadbolt
(AYRDB-DRIVE
Adjustable Drive-In Deadbolt
available for purchase)
OR OR
Screw Set D
Silver for
2 to 2-1/4"
Door Thickness
Screw Set C
Black, Standard
for 1-3/4"
Door Thickness
Strike Plate
and
Deadbolt
Screws
Inside Lock
Screws
Optional
Security
Strike Plate
Screws
Screw Set B
Green
for 1-3/8"
Door Thickness
What's In The Box
Battery Cover
Key
000XXX
XXXX0000000
Installation Guide
and Door Template
Let's Get Started
4 AA Batteries
Battery Cover
Inside Lock Mounting Plate
x2 x2 x2 x2 x2x4
Nest Connect
Included with RB-YRD540 models
Frame
Remove Existing Deadbolt
Do not discard old lock hardware until Nest x Yale Lock has been successfully installed.
1
P/N RB-YRD540 Rev 2
3
P/N RB-YRD540 Rev 2
4
New Door Marking Template
Door Checker
Use door checker from installation guide envelope to verify your door measurements and
make any needed adjustments.
With door checker, use template from installation guide envelope to prep a new door that
has not been predrilled for hardware.
Check
Your Door
Guide
New Door
Marking
Template
2Check Door Measurements And
Make Adjustments If Needed
Let's Get Started
Let's Get Started
3Download the Nest App
You must have one of the following products to use your lock with the Nest App:
• Nest Connect or
• Google Nest Alarm System
Your new Nest x Yale Lock is easy to control through the Nest App. The app will allow you to
program your lock and share access. If you aren't using the Nest App, we highly recommend
downloading it now.
P/N RB-YRD540 Rev 2
5
x2
For Deadbolt
Actual Size
*Deadbolt position is based on
backset. Choose position
appropriate for your door.
Reference Door Checker
measurements E and F.
AYRDB-DRIVE
Adjustable Drive-In Deadbolt
available for purchase on
ShopYaleHome.com
optional
optional
*2-3/8" Backset, default
*2-3/4" Backset, optional
Press
Pull
Bolt must be in retracted (unlocked)
position. Note horizontal orientation of
tailpiece slot and UP orientation of
deadbolt latch.
Backset
For Strike Plate
Actual Size
x2
Choose
standard strike
plate screws
or security
screws.
For Strike Plate, optional
Actual Size
Bolt must be in
retracted
(unlocked)
position.
x2
4Install Deadbolt and Strike Plate
O
P/N RB-YRD540 Rev 2
6
5Install Touchscreen Keypad
Outside of DoorInside of Door
Door face hole must be
at least 2-1/8". If hole is
too small, a door lock
installation kit or jig
should be used to
increase hole size.
Bolt must be in retracted
(unlocked) position. Note
horizontal orientation of
tailpiece slot.
P/N RB-YRD540 Rev 2
7
Inside of Door
Make sure plate
and keypad are
level before
tightening
through bolts.
Insert cable
through cable
hole of
mounting plate.
Actual Size
x2
Screw Set D
Silver
for
2 to 2-1/4"
Door Thickness
x2
Screw Set C
Black
Standard for
1-3/4"
Door Thickness
Actual Size
Actual Size
Choose through bolt appropriate for
your door thickness. Verify appropriate
through bolt with the door checker.
Screw Set B
Green
for
1-3/8"
Door Thickness
x2
6Install Inside Mounting Plate
P/N RB-YRD540 Rev 2
8
000XXX
XXXX0000000
Make sure to
connect cable
securely with black
mark side up.
7Remove Battery Cover
8Attach Cable
Use cable hooks
for proper cable
routing. Do not
pinch cable.
P/N RB-YRD540 Rev 2
9
x2
Make sure
bolt is
retracted.
000XXX
XXXX0000000
Make sure inside lock is
properly seated on bottom of
mounting plate and excess
cable is tucked into lock cavity.
9Install Inside Lock
Test Operation
Actual Size
Close door and check bolt
operation. Bolt should move
freely and easily. Go back to
step 5 to recheck installation
if there is resistance.
000XXX
XXXX0000000
P/N RB-YRD540 Rev 2
10
Congratulations, you've installed the Nest x Yale Lock!
000XXX
XXXX0000000
“Hi from
Yale and Nest.”
000XXX
XXXX0000000
10 Install Batteries/Hand Lock
11 Install Cover
If you are pairing your Nest x Yale Lock with the Nest App, you should scan the
QR code on the inside of the lock at this time.
QR code
Indice
