Fax +32 030 9904733
Copies of the I/B. Please reproduce them ithout any
changes except under special instruction from Bimar
(Italy). The pages must be reproduced and folded in
order to obtain a booklet A5 (+/- 148.5 mm idth x 210
mm height). When folding, make sure you keep the good
numbering hen you turn the pages of the I/B. Don’t
change the page numbering. Keep the language
integrity.
personnel, who will make sure that the section of the wires of the outlet is appropriate for the
absorbed power of the heater (10A). Check that the mains are not connected equipment; high
absorption to prevent overloading and fire risks. In general, the use of adapters or extension cords
is not recommended; if their use is indispensable, they must conform to existing safety standards
and their current capacity (amperes) must not be less that the maximum of the heater.
Attention: before use the appliance remove the detachable coupon to stick the handle.
•Before each use, verify that the heater is in good condition and that the electrical cord is not
damaged: in the case of doubt, ask for professionally qualified help.
•Make sure that the cable is correctly positioned and that it is not in contact with hot parts or sharp
edges, nor wrapped around the device or twisted.
•Position the fan heater far from other sources of heat, inflammable materials (curtains, carpets,
etc.), inflammable gases or explosive materials (spray cans) and from materials that can deform on
exposure to heat. Make sure that there is 100 cm of free space in front of the fan heater and 30 cm
on the sides. Do not use the heater in the immediate vicinity of a bathtub, shower or swimming
pool (to avoid drops of water falling on the heater or the heater falling in the water), or in places
where it could be subject to shocks.
•Do not hang or simply pull the unit to the wall or walls.
•Make sure that the fan heater is working correctly: if not, turn the heater off and have it checked by
professionally qualified personnel.
•Make sure that the air-intake grid is not obstructed by objects, fabrics or anything else to avoid the
heater overheating or breaking.
•In the case of a breakdown or fault, switch off the appliance and have it checked by a
professionally qualified technician; repairs made by unqualified persons can be dangerous and
render void the warranty.
OPERATION
Each time before use, check that the appliance is in good state, that the electric cord is not damaged:
in case of doubt, do not use it but contact a qualified technician.
To use the heating fan, follow these steps:
1. Insert the plug in the power socket.
2. Turn the switch, in pos. I.
3. To turn off the heater, in pos. 0.
Never leave the appliance connected to the socket if it is not in use, especially for long periods.
CLEANING AND MAINTENANCE
Attention: before cleaning the fan heater, turn it off, remove the plug from the outlet and wait for it
to cool.
•Periodically check that the air-intake grill is not obstructed by fuzz or threads.
•Use a soft, slightly damp cloth to clean the body; do not use metal scouring pads or abrasive
products.
•For long periods of inactivity, you must cover it and place it in a dry place; it is advisable to put it
in its original packaging to protect it from dust and humidity.
•If you decide not to use the fan heater, we recommend that you make it inoperative by cutting the
power cord (but first make sure you have removed the plug from the electrical outlet), and make
those parts harmless that are dangerous when played with by children.
8
/
23
Assembly page 8/23
