Bintelli B1 Manuale utente

www.BintelliBicycles.com

Bintelli Electric Bicycles

Owner’s Manual

For how-to videos, please visit https://bintellibicycles.com/how-to-videos/

IMPORTANT INFORMATION! PLEASE READ PRIOR TO RIDING.

FULLY CHARGE BATTERIES BEFORE FIRST USE - Batteries should be fully charged immediately when they are received and after each use for the

recommended charge times (see below).

•

Lithium-ion Batteries: 4-6 hours

FACTORS TO MAXIMIZE THE RANGE OF YOUR ELECTRIC BICYCLE

•RIDER INPUT - The more the rider pedals the further the distance traveled. Continuous riding, as opposed to frequent stopping

and starting, will yield the greatest range possible.

•ELEVATION GAIN - The flatter the road the further the distance traveled.

•WEATHER - Cold weather can adversely affect the battery capacity.

•TERRAIN - The smoother the terrain (roadways vs. gravel roads, etc.) the further the distance traveled.

•RIDER WEIGHT - The lighter the rider, resulting in less drain on the batteries, the further distance traveled.

•RIDER BICYCLE MAINTENANCE - A properly maintained bicycle will yield the greatest range possible.

•RIDER TIRE PRESSURE - Properly inflated tires have less rolling resistance and will be easier to pedal.

•BATTERIES - Properly charged and maintained batteries will yield the greatest range possible. Batteries stored in cold areas (below 50

degrees Fahrenheit/10 degrees Celsius) will show reduced range. Batteries that have not been kept in optimum condition will show

reduced range and run time.

TABLE OF CONTENTS

Important Information..................................................................................................................1

Table Of Contents..........................................................................................................................2

Terminology ..................................................................................................................................3

Recommended Tools ....................................................................................................................4

Before You Ride ............................................................................................................................5

Safety Checklist .............................................................................................................................6

Riding Position...............................................................................................................................7

Handlebar Adjustment .................................................................................................................8

Throttle .........................................................................................................................................9

Riding Options …………………………………………………………………………………………………………………………10

Battery Care and Storage .............................................................................................................11

Frequently Asked Questions .........................................................................................................12

Bicycle Assembly ...........................................................................................................................13

Forks ..............................................................................................................................................14

Seat and Seat Post.........................................................................................................................15

Installing the Front Wheel.............................................................................................................16

Disc Brakes and Derailleurs ..........................................................................................................17

Drivetrain.......................................................................................................................................18

Troubleshooting ............................................................................................................................19

Checking Battery Terminals ..........................................................................................................21

How To Remove Your Battery ………………………………………………………………………………………………… 22

How To Turn On Your Headlight …………………………………………………………………………………………….. 23

How To Adjust the Brake...............................................................................................................24

How To Replace the Brake Lever ..................................................................................................25

How To Adjust the Derailleur........................................................................................................26

How To Remove the Rear Wheel ..................................................................................................27

How To Replace the Pedal Shaft ...................................................................................................28

Wiring Diagram .............................................................................................................................29

Warning / Important - Take notice of this symbol throughout this manual and pay

close attention to the instructions blocked off and preceded by this symbol.

Terminology

Power Systems

PAS –Pedal Assist - A sensor ring and pickup mounted near the bottom bracket below the bicycle to sense forward pedaling and apply power.

TAG –Twist and Go - A rider-controlled system, the motor activates only when the handlebar throttle is turned.

PAS/TAG –Pedal Assist or Twist and Go - A handlebar-mounted button allows selection of PAS or TAG modes.

Battery Systems

RTMB –Rack Top Mounted Battery with Lithium polymer cells - A single Li-Po battery pack lies horizontally inside the rack.

STB –Seat Tube Battery with Sealed Lead Acid (SLA) or Lithium Ion (Li- Po ) cells - A single battery pack is mounted behind the seat tube.

Before You Ride

About This Manual

It is important for you to understand how your new bicycle operates. By reading this manual before you go out on your first ride, you’ll know how to

achieve better performance, comfort, and enjoyment from your new bicycle. It is also important that your first ride on your new bicycle is taken in a

controlled environment, away from cars, obstacles, and other distractions.

General Warning

Bicycling can be a hazardous activity even under the best of circumstances. Proper maintenance of your bicycle is your responsibility as it helps reduce

the risk of injury. This manual contains many “Warnings” and “Cautions” concerning the consequences of failing to maintain or inspect your bicycle.

Safety Checklist

Before first initial ride and every ride after, it is important to carry out the following safety checks:

Brakes

•

Check that front and rear brakes work properly.

•

Check that brake calipers are not over worn and are adjusted correctly.

•

Check that brake control cables are lubricated, adjusted, and do not display obvious wear and tear.

•

Check that brake control levers are lubricated and tightly secured to the handlebar.

Wheels & Tires

•

Check that tires are inflated within the recommended limit as displayed on the tire sidewall.

•

Check that tires have tread and do not show any bulges or excessive wear.

•

Check that rims run true and do not have any obvious wobbles orkinks.

•

Check that all wheel spokes are tight and unbroken.

•

Check that axle nuts are tight. If your bicycle is fitted with quick release axles, make sure locking levers are correctly tensioned and in the closed position.

Steering

•

Check that the handlebar and stem are correctly adjusted, tightened, and allow proper steering.

•

Check that the handlebars are set correctlyin relation to the forks and the direction of travel.

Chain

•

Ensure chain is oiled, clean, and runs smoothly. (Extra care is required in wet or dustyconditions)

Bearings

•

Check that all non-sealed bearings are lubricated, run freely, and do not display excess movement.

Cranks & Pedals

•

Check that pedals are tightened to thecranks.

•

Check that cranks are tightened to the axle and are not bent.

Derailleurs

•

Check that the front and rear mechanisms are adjusted and functionproperly.

•

Check that the shift and brake levers are attached to the handlebar, shift, andbrake.

•

Check that derailleurs, shift levers, shift and brake cables are properlylubricated.

Frame and Fork

•

Check that the frame and fork are not bent nor broken. (If either is bent or broken, they need to bereplaced)

Accessories

•

Check that that all reflectors are properly fitted.

•

Check that all other fittings on the bike are properly secured, fastened, and functioning properly.

•

Make sure the rider is wearing a helmet.

10.

Motor and Throttle

•

Check that the motor is working properly.

•

Check that the throttle is working properly.

11.

Battery pack

•

Check that the batteries are in good operating condition and kept fully charged.

The ideal clearance will vary between types of bicycles and rider preference. This makes straddling the frame when off the seat easier and safer in

situations such as sudden stops. The following chart and diagram will help you make the correct choice. Rider leg length refers to approximate pant

inseam.

Riding Position

Seat Height

For the most comfortable riding position and best possible pedaling

efficiency, the seat height should be set correctly according to the rider’s leg

length. Correct seat height helps prevent leg strain from over-extension.

When sitting on the bicycle, place your foot onto the pedal. The correct seat

height will allow the knee to be slightly bent in this position. If the rider

places their heel on the pedal, the leg should be almost straight.

Under no circumstances should the seat post project from the frame beyond

its “Minimum Insertion” or “Maximum Extension” mark. If your seat post

exceeds these markings, the seat post or frame may break. Before your first

ride, make sure to tighten the seat clamp appropriately. A loose seat clamp

can cause damage to the bicycle or for the rider to lose control. Periodically

check to make sure that the seat clamp is properly tightened.

Reach

To obtain maximum comfort, the rider should not overextend their reach

when riding.

To adjust this distance, the position of the seat can be adjusted in relation to

the seat post.

Handlebar Adjustment & Height

Height

Maximum comfort is usually obtained when the handlebar height is equal to

or slightly higher than the height of the seat. You may wish to try different

heights to find the most comfortable position.

Stem

The stem’s “Minimum Insertion” should not be the top of the headset. If the

stem is extended beyond this mark, the stem may break or damage the fork’s

steering tube, which could cause you to lose control or become injured.

Place the front wheel of the bicycle between your legs and attempt to twist

the handlebar/stem assembly using a reasonable amount of force. There

should not be any play in the handlebars or in relation to the wheel. If you

can twist the handlebars while the wheel remains in place, do not ride it until

proper alignment is obtained. Make sure to tighten all bolts accordingly

before use.

Failure to properly tighten any of these properly could result in losing control

of the bike and rider injury.

Throttle

TAG (Twist & Go)

Before you begin riding, turn the main power switch on, then start

riding as you would ride any regular, non-motor assisted bicycle. After

you have begun to ride, slowly twist the throttle (on equipped models)

towards you. The more you twist the throttle, the more power the

motor will supply. Once you have twisted the throttle all the way, the

motor will accelerate you to its full speed.

Questo manuale è adatto per i seguenti modelli

Indice

Manuali Bicicletta popolari di altre marche

RAMBO

RAMBO R1000X2M-FF-BFD Manuale utente

Vermeiren

Vermeiren SAFARI Manuale utente

Velec

Velec A2/36V Manuale utente

Coswheel

Coswheel A-ONE Manuale utente

Betzold

Betzold 97869 Manuale utente

Cervélo

Cervélo S3 2019 Manuale utente

Tenways

Tenways AGO X Manuale utente

Festo

Festo EGSC-BS-KF Manuale elenco delle parti

Gio Electric

Gio Electric H1 Volt Manuale utente

GOGOBEST

GOGOBEST GM30 Manuale utente

DAHON

DAHON CIAO - 2009 Manuale utente

Aprimatic

Aprimatic ONDA 500 Guida rapida

MV Agusta

MV Agusta Lucky Explorer GRAVEL Manuale di istruzioni

Greyp

Greyp G6 Series Manuale utente

Babboe

Babboe Carve-E Manuale utente

Huka

Huka orthros Manuale utente

Xtracycle

Xtracycle Stoker 2021 Manuale utente

APRILIA

APRILIA DORSODURO 750 ABS 2015 Manuale utente