bioBidet elite 3 Documento tecnico
rebmuNegaPdraobpilC
$+1$+&'6
'.+6'
Installation
Manual &
Operating
Instructions
BIO BIDET ELITE 3
WARNING Do Not over-tighten
plumbing connections.
Over-tightening plumbing
connections can damage parts and
cause leak.
2
BIO BIDET ELITE 3
CONTENTS
............................. 4
.................................................................. 5
.......................................................... 6
......................................... 7
8
....................................................... 10
................................................................ 12
Read this manual carefully
and install properly
This product should be installed
accordingly to the manual
Keep this manual for future reference
Functions and Characteristics
Parts list
Configuration
Final Assembly ..............
Installation Instruction
Maintenance
Warranty
Contact
3
.....................................
BIO BIDET ELITE 3
Ambient Temperature bidet
model
Ingenious splash guard
Continuous Controlled
Water Stream
No electricity or battery
required
Connects directly to
fresh water line
Adjustable brackets
Adjustable Pressure
Control
Quality Silver Brass Part
Universal T valve
Removable nozzle for
better hygiene
Splash Guarded Nozzle
P.S.P.C (Positive Stepping
Pressure Control)
Double sided body panel
Functions and Characteristics
4
Main body
Splash Guard
Adjustable brackets
WATER PRESSURE
CONTROL KNOB
Adjustable Brackets Main Body
BIO BIDET ELITE 3
Parts List
Name Quantity
Bidet 1
7/8” Fill Valve Adaptor 1
Water Supply Hose 1
Protective O rings 2
Owner’s Manual 1
5
BIO BIDET ELITE 3
Configuration
6
BIO BIDET ELITE 3
Tighten nuts while checking for leaks.
Do Not over tight.
7
Flexible Hose
(Not Included)
BIO BIDET ELITE 3
Installation Instructions
1. CAUTION
2. PROCEDURES OF ASSEMBLY
3
Shut water supply by turning it to
the right and disassemble the
water hose.
Flush toilet to drain water inside
of toilet water tank before
disassembling the water hose.
1
8
Do Not over tight any connections. Over tightening
connections and adaptor can cause damage to
the parts.
BIO BIDET ELITE 3
4
Remove existing seat and lid.
Release the bolts on both side of
the existing toilet seat.
2
3
Connect supplied T valve to the
toilet fill valve. Note T valve will
be connected directly to toilet fill
valve, not the shut off valve. Then
connect rest of water lines to
connected T valve.
3
3
Mount bidet and toilet seat/lid
over toilet mounting holes.
Supplied rubber O-rings should be
placed under the bidet mounting
bracket to protect and secure
bidet on the toilet.
4
3Open shut off valve and
check for any leaks.
5
9
Flexible Hose
(Not Included)
BIO BIDET ELITE 3
Maintenance
To clean the nozzle, gently pull down on the head of the nozzle,
and use a toothbrush of soft cloth and mild detergent to clean
the nozzle. You may also remove entire nozzle assembly and
soak it in mild detergent.
Do not use any harsh, abrasive products to clean Elite 3, which
may damage surface of the product.
10
Indice
Altri manuali bioBidet Prodotto idraulico
bioBidet
bioBidet SlimEdge Manuale utente
bioBidet
bioBidet STREAM SPECIAL EDITION A5 Guida alla risoluzione dei problemi
bioBidet
bioBidet FLOW X-1000 Manuale utente
bioBidet
bioBidet BB-i3000 Manuale utente
bioBidet
bioBidet BB-1000 Manuale utente
bioBidet
bioBidet A3 Documento tecnico
bioBidet
bioBidet Discovery DLS Manuale utente
bioBidet
bioBidet BB-800 Documento tecnico
bioBidet
bioBidet BB-1000 Documento tecnico
bioBidet
bioBidet BB-600 Manuale di istruzioni
