Biodom 27 A Manuale utente

__________

PELLET BOILER

BIODOM 27 A

Instructions for use, maintenance and installation

__________

March 2019

Biodom 27 A | instructions for use, maintenance and installation | March 2019

GENERAL INFORMATION

BUYER:

NAME AND SURNAME:

STREET AND HOUSE NO.:

CITY:

PHONE NO/GSM: __________________E-MAIL:

DATE OF SALE:

INVOICE NUMBER:

PRODUCT TYPE:

SERIAL NUMBER:

DURATION OF WARRANTY: 2 YEARS

STAMP AND SIGNATURE:

COMMISSIONING OF THE DEVICE

DATE OF COMMISSIONING:

AUTHORIZED COMPANY NAME:

STREET AND HOUSE NO.:

CITY:

PHONE NO.:

NAME AND SURNAME OF SERVISER:

STAMP AND SIGNATURE OF SERVISER:

(FILLS IN AN AUTHORIZED SERVICE COMPANY)

Biodom 27 A | instructions for use, maintenance and installation | March 2019

We thank you for your purchase of Biodom boiler. We ask to thoroughly read instructions for use

before installing and using your pellet boiler Biodom. Heating appliances (in the following: "pellet

boiler" or "boiler") of company Biodom 27 d.o.o. (in the following: Biodom) are manufactured and

tested in accordance with safety requirements of European Directives in force.

These instructions are intended for end users, installers and authorized maintenance personnel for

Biodom pellet boilers. If you have any doubts regarding the instructions for use or require any

clarification, please contact the manufacturer or authorized person of company Biodom 27 d.o.o.

directly.

Printing, translation or reproduction, even in part, of the instructions of use is possible only upon

approval by company Biodom 27 d.o.o.

You have purchased a Biodom boiler, which is used for central heating of surfaces from 80 m2 to 400

m2. The fuel for the boiler is wood pellets. The boiler operates automatically by dosing pellets with a

dosing screw from pellet container, which is a component part of device and is installed above the

boiler part of the device. The container is filled with pellets from above, through the provided cover.

Ensure that the incineration device is correctly dimensioned according to heating system and thermal

requirements of the building. Connection and start-up of the machine must be done by an authorized

person.

Flame, produced with correct burning of wood biomass inside the boiler, emits the same amount of

carbon dioxide (CO2) as with normal decomposition of wood.

The amount of CO2produced by the combustion or decomposition of wood corresponds to the amount

of CO2that a tree obtains from the environment and then transforms to oxygen and carbon.

The use of non-renewable fossil fuels (coal, fuel oil, gas), as opposed to what happens with wood,

releases into the air enormous amount of CO2accumulated over millions of years, which increases the

greenhouse effect. The principle of clean combustion fully meets all environmental requirements, and

Biodom has based its entire development on this basis.

Biodom 27 A | instructions for use, maintenance and installation | March 2019

INDEX

1. PURPOSE OF INSTRUCTIONS FOR USE ................................................................................ 7

1.1. UPDATES .................................................................................................................................. 7

2. RESPONSIBILITY OF MANUFACTURER................................................................................. 7

2.1. BASIC PREVENTIVELY REQUIRED STANDARDS......................................................................... 7

2.2. TRANSPORTATION AND HANDLING OF PELLET BOILER........................................................... 8

2.3. RESPONSIBILITY OF INSTALLER ................................................................................................ 8

3. INSTALLATION ................................................................................................................... 9

3.1. PLACEMENT............................................................................................................................. 9

3.2. EXTRACTION OF SMOKE GASES............................................................................................. 12

3.3. INSULATION AND DIAMETER OF HOLES IN THE ROOF.......................................................... 14

3.4. INLET AIR ............................................................................................................................... 14

3.5. ELECTRICAL CONNECTION..................................................................................................... 15

4. BOILER COMMISSIONING ................................................................................................ 17

5. SAFETY WARNINGS.......................................................................................................... 17

5.1. SAFETY WARNINGS FOR MAINTENANCE STAFF .................................................................... 17

5.2. SAFETY WARNINGS FOR USER............................................................................................... 18

6. INSTRUCTIONS FOR SAFE IGNITION AND CLEANING OF BOILER......................................... 19

6.1. REGULAR MAINTENANCE AND CLEANING OF BOILER .......................................................... 19

6.2. CONTROL AND PARTS REQUIRING MAINTENANCE............................................................... 20

6.3. ADDITIONAL MAINTENANCE................................................................................................. 21

7. IMPORTANT SAFETY INFORMATION................................................................................. 22

8. PELLET QUALITY IS VERY IMPORTANT............................................................................... 22

8.1. STORING PELLETS .................................................................................................................. 23

9. DESCRIPTION AND OPERATION OF CONTROL DEVICE........................................................ 24

10. SCHEME OF ELECTRONIC CONTROL PANEL OF THE BOILER................................................ 30

11. ALARM STATUSES ............................................................................................................ 31

12. INFORMATION REGARDING DESTRUCTION AND DISPOSAL OF BOILER .............................. 37

13. TECHNICAL CHARACTERISTICS OF MODEL BIODOM 27 A................................................... 38

14. DIMENSIONS OF BOILER BIODOM 27 A ............................................................................ 39

15. INSTRUCTIONS FOR INSTALLERS....................................................................................... 40

Biodom 27 A | instructions for use, maintenance and installation | March 2019

16. BOILER CONNECTION INSTRUCTIONS............................................................................... 41

17. CONNECTION SCHEMES................................................................................................... 44

17.1. SCHEME NR.1: HEATING ONLY............................................................................................... 44

17.2. SCHEME NR.2: HEATING HOUSEHOLD HOT WATER .............................................................. 46

17.3. SCHEME NR.3: HEATING WITH MULTIPLE SYSTEMS.............................................................. 48

18. WARRANTY CONDITIONS................................................................................................. 50

Biodom 27 A | instructions for use, maintenance and installation | March 2019

1. PURPOSE OF INSTRUCTIONS FOR USE

The purpose of instructions for use is that the user takes all necessary measures and prepares all

required equipment to ensure safe and proper use of combustion device.

1.1. UPDATES

These instructions reflect the state of the product at the moment the boiler is produced.

Instructions are not applicable for products, which are already present on the market with correspond-

ing technical documentation and cannot be considered as insufficient or inadequate after any modifi-

cation, adaptation or application of new technologies on newer products.

The content of this booklet must be carefully read and heeded to. All of the information, contained in

this booklet, is necessary for correct installation, use and maintenance of you boiler.

The instructions must be stored carefully and safely. Instructions for use, maintenance and installation

are a component part of pellet boiler.

If the pellet boiler changes ownership to another person, this person must also receive these

instructions for use, together with the boiler.

If the instructions get lost, request for a new copy of instructions from the manufacturer, authorized

reseller or repairman.

2. RESPONSIBILITY OF MANUFACTURER

In providing these instructions, Biodom 27 d.o.o. rejects any civil or penal liability, direct or indirect,

due to:

•accidents caused by non-compliance with standards and specifications from these instructions;

•accidents caused by prohibited or incorrect use by the user;

•accidents caused by modifications and repairs not authorized by manufacturer Biodom 27

d.o.o.;

•poor maintenance;

•unforeseeable events;

•accidents caused by use of non-original or improper spare parts.

The installer is fully responsible for installation.

2.1. BASIC PREVENTIVELY REQUIRED STANDARDS

Product Biodom 27 A is manufactured in accordance with the following standards:

DIRECTIVE EC ON MACHINERY (2006/42/EC);

DIRECTIVE EC ON LOW-VOLTAGE EQUIPMENT (2014/35/ES);

DIRECTIVE EC ON ELECTROMAGNETIC COMPATIBILITY (2014/30/ES);

DIRECTIVE EC ON BOILERS FOR HEATING ON SOLID FUELS UP TO NOMINAL POWER kW; EN 303-5

Harmonized standards:

Biodom 27 A | instructions for use, maintenance and installation | March 2019

•SIST EN ISO 12100-1: 2004 and A1: 2010;

•SIST EN ISO 12100-2: 2004 and A1: 2010;

•SIST EN 303-5: 2012;

•61000-6-3: 2007;

•61000-6-2: 2005;

•61000-3-3: A1 2002;

•61000-3-3: A2 2006;

•EN 60204-1: 2006 and A1:2009.

2.2. TRANSPORTATION AND HANDLING OF PELLET BOILER

When moving the boiler, pay attention to your safety.

Before transport and handling of the boiler, which must be performed in complete safety, make sure

that the lifting capacity of transport equipment suffices. Avoid sudden and/or abrupt movement of

boiler.

ATTENTION

DISCARD ALL PACKAGING OUT OF REACH OF CHILDREN. DANGER OF SUFFOCATION WITH BAG,

FOIL, POLYSTYRENE ETC.

2.3. RESPONSIBILITY OF INSTALLER

It is the responsibility of the installer to check adequacy of installation and pipeline, ensure air intake

for combustion, ensures regulated distances and all other solutions, required for installation of the

pellet boiler.

It is the responsibility of the installer to ensure compliance with local legislation in force in the place of

pellet boiler installation.

Use of the pellet boiler must conform with instructions, provided in Instructions for use, maintenance

and installation, and all safety standards, specified by local legislation in the place of pellet boiler

installation.

Standard UNI 10683 defines duties of installer. The installer must check:

•type of device to be installed;

•adequacy of space for installation of unit, reflected by minimum required size of the space, in

which the pellet boiler will be installed;

•instructions of the manufacturer about heating device, regarding requirements of smoke gases

outlet;

•flue pipe internal diameter, the material it is made of, is it straight or even and that there are

no obstructions;

•height and, if required, vertical extension of flue pipe;

•existence and suitability of flue pipe cover resistance;

•possibility of outside air intake;

•possibility of simultaneous use of generator for connection with other equipment.

Biodom 27 A | instructions for use, maintenance and installation | March 2019

If the results of all above provided checks are positive, installation may proceed. Carefully heed to

instructions provided by the manufacturer, as well as safety and fire prevention standards in force.

After the first start-up of the boiler, perform a minimum 30-minute test of operation to check all

required demands.

When the installation is complete, the installer must provide the customer with the following:

•instructions for use, maintenance and installation from the manufacturer (if not included in

the unit);

•required documentation in accordance with standards in force;

•perform training of customer for operation and regular maintenance and cleaning of the

device.

3. INSTALLATION

Responsibility for installation work in the space is entirely upon the customer.

Before proceeding with installation, the installer must comply with all required legal safety standards,

especially:

•Check that norms regarding pellet boiler installation meet local, national and European norms

•Heed to requirements set forth in this document

•Check that pipes and air intake are compliant with the type of installation

•Do not make temporary electrical connections by using unsuitable cables

•Check earthing of electrical system

•Always use individual safety equipment and all legally required protection

•Always allow sufficient space for maintenance work

•Acquire consent of chimney sweep for connection of boiler to flue

•Perform measurement of smoke gases outlet after finished installation.

3.1. PLACEMENT

It is advisable to remove pellet boiler packaging only when it is in the place of installation.

If the adjacent walls and/or flooring are made of material that is not heat resistant, suitable protection

must be provided using insulating, non-combustible material.

For protection of flooring, made of flammable material, we advise installing a metal plate with

thickness 3 to 4 mm under the boiler, which protrudes at least 30 cm out from the front of the pellet

boiler.

Pellet boiler must be installed in accordance with drawing that defines distances from walls (figure 1).

Biodom 27 A | instructions for use, maintenance and installation | March 2019

Figure 1: Minimum distance of boiler from boiler room walls

If the pellet boiler is installed in a boiler room, where there are other devices, which drain air (other

boiler, various suction fans etc.), make sure that the volume of air intake is sufficient for safe operation

of combustion device.

Flue pipe

EXAMPLE 1

EXAMPLE 2

Flue pipe

EXAMPLE 3

Indice

Altri manuali Biodom Caldaia

Biodom

Biodom 27 C5 Valter DF 34 Manuale utente

Biodom

Biodom C15 Manuale utente

Biodom

Biodom 33 Manuale utente

Biodom

Biodom C15 Manuale utente

Manuali Caldaia popolari di altre marche

Vaillant

Vaillant uniSTOR VIH SW GB 500 BES Manuale utente

Radijator

Radijator BIO max 23.1 Manuale utente

Brunner

Brunner BSV 20 Manuale utente

Buderus

Buderus Logamax GB062-24 KDE H V2 Manuale utente

Potterton

Potterton 50e Scheda tecnica

UTICA BOILERS

UTICA BOILERS TriFire Manuale utente

Joannes

Joannes LADY Series Manuale

ECR International

ECR International UB90-125 Manuale di istruzioni

Froling

Froling FHG Turbo 3000 Manuale utente

Froling

Froling P4 Pellet 8 - 105 Manuale utente

U.S. Boiler Company

U.S. Boiler Company K2 Manuale utente

Henrad

Henrad C95 FF Manuale utente

NeOvo

NeOvo EcoNox EF 36 Manuale utente

Potterton

Potterton PROMAX SL 12 Manuale utente

Eco Hometec

Eco Hometec EC 25 COMPACT Manuale utente

Viessmann

Viessmann VITODENS 200 Guida

Baxi

Baxi Prime 1.24 Manuale utente

REXNOVA

REXNOVA ISA 20 BITHERMAL Manuale utente