BION F100 Manuale utente
Bion Advance Pte. Ltd. (UEN/GST Reg. No.: 200821057Z)
35 Pioneer Road North #02-03, Singapore 628475
Tel: 6250 0562
Fax: 6777 0347
info@bion.sg
www.bion.sg
Bion Safety Bedrail F100
Assembly Instructions
Dear Customers,
Thank you for using our swing bedrail. Before using the bedrail, kindly read the
instruction manual carefully and use it correctly. Keep this manual in a safe place for
future reference.
Bion Advance Pte. Ltd. (UEN/GST Reg. No.: 200821057Z)
35 Pioneer Road North #02-03, Singapore 628475
Tel: 6250 0562
Fax: 6777 0347
info@bion.sg
www.bion.sg
Step 1:
Open the package, take the product out. Align
the upper part with the lower support frame.
Then insert the upper part into the lower
support frame.
Step 2:
Insert C-shaped clip on both sides.
Step 3:
Insert the U-shaped flat pipe, and the marbles
on both sides are clamped outside the holes of
the support frame.
Step 4:
Insert the foot tubes on both sides from the
bottom.
Bion Advance Pte. Ltd. (UEN/GST Reg. No.: 200821057Z)
35 Pioneer Road North #02-03, Singapore 628475
Tel: 6250 0562
Fax: 6777 0347
info@bion.sg
www.bion.sg
Step 5:
Align the hole position and insert C-shaped
fasteners on both sides.
Step 6:
Place the swing bedrail at the appropriate
position on the bed, and then fix the swing
bedrail on the bed with screws, and fasten it
firmly with a tool.
Step 7:
Press the mattress on the swing bedrail.
Step 8:
Adjust the height of the foot tubes to the ideal
height, and then fine tune the foot tubes
through the screws to make them flush with
the ground.
Bion Advance Pte. Ltd. (UEN/GST Reg. No.: 200821057Z)
35 Pioneer Road North #02-03, Singapore 628475
Tel: 6250 0562
Fax: 6777 0347
info@bion.sg
www.bion.sg
Step 9:
Pull the switch upward and push it outward to
open the door.
Indice
Altri manuali BION Attrezzatura di sicurezza
