Biontech BTM-505N Manuale utente
WATER IONIZER
Read this manual carefully for proper use of the product. Keep the manual in a safe place and refer
to the manual whenever necessary.
Our company will not be held responsible for any malfunction or accident resulting from incorrect installation or
improper handling.
Note : There is a protection film on the operation panel of this product.
Bion-tech
OPERATION MANUAL
Model : BTM-505N
Dedicated to runing water lines
Table of contents
Use this manual to install the product correctly.
Make sure that all plumbing and electric work comply with the regulations of your residence.
Discontinue and seek for professional help if you inspect a water leakage.
The performance of the unit will depend on the quality of water source.
Please check water condition before the installation of this product.
Biontech Co., Ltd. will not be held resposible.
Please keep this manual and other documents for future reference.
2
Table of contents
1. Name and description of each part of the product 4
2. Safety preparations 6
3. How to install 8
Installation precautions 8
How to install 9
4. Before using the product 13
Precautions for using the product 13
Using the product appropriately for each purpose 14
How to store and manage the product after it is used. Precautions for using it
16
5. How to generate ionized water 17
Selecting the alkaline ionized water 17
Selecting the acidic ionized water 17
Selecting the purified water 18
How to measure the pH value 19
6. When and How to replace the filter 19
When to replace the filter 18
How to replace the filter 20
Cleaning Filter 21
How to use cleaning filter 22
7. How to use ionized water 23
8. Before you think the system is malfunctioning 25
Questions and Answers (Q&A) 25
About after service (A/S) 27
9. Product Specifications 31
Components
The following components need to be checked before installation.
The illustration shows basic components, their shapes may appear different
from the actual components.
If malfunctioning is generated because genuine components designated by the
company are not used, the warranty service will not be provided.
3
Components
Wall-hanging Nails and Fuse
Hose
pH Comparison Sheet
Flexible Alkaline Faucet
Hose Band
pH Test Solution
7x9 PVC hoses: 70cm
1/4" standard hose: 2m (PE reinforced hose)
1 Fuse
2 Nails
2 Screws
2 Anchor Bolts
For Water Outlet
Installation Drawing
Safety Pins
For Mounted Wall
x1
x2
x1
x1
x1
For
Water
Outlet
(Optional)
x1
Valve Cover
Adaptor(Optional)
x1
x1
Water Supply Control Valve Set
x1 x1 x2 x1
Water outlet
x1
x1
4
Front Side
Source water inlet
Source water outlet
Number Name Function
1 Front Plate Where the circuit systems and devices are fixed
2 Operating Panel Operation and display of functions
3 Flexible Alkaline Faucet Outlet pipe from which the alkaline ionized water flows out
(Acidic ionized water flows out when the acidity is chosen)
4 Back Plate Protective cover for the internal circuits and components
5 Filter Cover Protective cover for the filter
6 Bottom Plate Where the transformer, electrical cords and devices are fixed
7 Acidic Water Outlet Outlet pipe from which the acidic ion0ized water flows out
(Alkaline ionized water flows out when the acidity is chosen)
8 Inlet Supplys the source water to the product
9 Wall-hanging Hole Hangs the product on the wall using nails
10 Fuse Holder Safety system (Rated fuse : According to the area’s electric power condition)
11 Speaker For voice guidance and buzzer sounds
12 Volume Adjustment Adjusts the volume of the voice guidance
13 Water Supply Adjustment Valve Controls the operation of the product and the volume of water
14
Water Supply Control Valve
Ionizer operation and water flow adjustment (on/off)
15 Fliter cover locking device Place where the fiter cover is safely locked
Rear Side
Bottom Side
Safety pin
Water supply valve one-touch fitting
Water supply valve
(One-touch)
[Inlet detailed picture]
5
Indication light for
purified water
To be turned on when purified
water is chosen
Operating Panel
Indication light for
alkaline ionized water.
To be turned on when alkaline
water is chosen
Indication light for
acidic ionized water.
To be turned on when the acidic
water is chosen
[Acidic ionized water]
selection button.
Button for selecting
the acidic ionized
water
[Purified water]
selection button.
Button for selecting the
water purification function
only
[Alkaline ionized water]
selection button.
Button for selecting the
alkaline ionized water
Indicating the errors for
- Overheated
electrolytic bath
- Failed self-cleaning
- Excessive water
cleaning flow
Colume
- Not approved
filter
Indicating the filter
usage status.
The usage status of the
filter
Indication light for
flow volume.
High indication light.
Indicating when the flow
volume is higher than the
appropriate level
Standard indication
light
Indicating when the flow
volume is normal, and the
indication level is varies
depending on the flow
volume
Low indication light.
Indicating when the flow
volume is lower than the
appropriate level
6
- Caution - You should read the documents marked with the following symbols.
- Instruction
- Prohibition
Indicates the possibility of the product causing electric shocks if it is disassembled.
Indicates that deadly effect can be caused to the body if you use the product wrongly because of
your disregard for the items.
The following describes the precautionary items that can prevent the potential damage to
the body or the property. The cases of misapplication and resultant risks are divided into
Warning and Caution items. You are required to read thoroughly and comply with the
descriptions considering they are related to your safety.
Description of the symbol marks
Warning
Indicates that injury to the body or damage to the property can be caused. if you use the product
wrongly because of your disregard for the items.
Caution
Disassembly to
be prohibited
Indicates the possibility of the product causing electric shocks due to electric
leakage if it is submerged.
Showering to be
prohibited
Indicates the possibility of the product or components catching fires due to external
sources of fire.
Fire sources to
be prohibited
Indicates the general items to be prohibited.
General items to
be prohibited
Marks
Classification
Description
The plug needs to be disconnected from the wall socket if there is a
possibility of malfunctioning or lightening.
Disconnecting the plug from the
wall socket.
Items related to the general behaviors of users.General
Marks Classification Description
This application can be used by children aged from 8 years and above and persons with reduced
physical, sensory or mental capabilities or lack of experience and knowledge if they have been given
supervision or instruction concerning use of the appliance in a safe way and understand the hazards
involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be
made by children without supervision. If the supply cord is damaged, it must be replaced by the
manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.
7
- Warning - Should be followed for your safety.
Do not apply any different power voltage other than the indicated power voltage.
If not followed, fires or electric shocks can be caused.
The fuse capacity of the product is 3A. Do not use any other fuse with different capacity.
Stop using the product immediately when any malfunctioning is found.
Do not handle the electric plug or operate the power button with wet hands.
If not followed, electrical shocks can be caused.
Should hold the electric plug when inserting it into the wall socket or removing it from the socket.
Damage to the electric cord, fires or electrical shocks can be caused when if the cord is pulled.
Clean the wall socket after removing the electric plug.
- When there are lots of dusts settled on it, fire can be caused.
Do not connect multiple cords to one single wall socket.
When a wall socket is shared, abnormal heat can be generated, possibly causing a fire.
Electrical shocks, short-circuiting, ignition of fires can be caused if a damaged electric cord or plug is used
Do not damage, process or forcibly wind or pull the electric cord.
- The cord can be damaged, possible leading to fires or electric shocks.
Do not fix the electric cord by using a stapler.
- The cord can be damaged, possible leading to fires or electric shocks.
Should not arbitrarily modify, disassemble or repair the product.
If not followed, fires and electric shocks can be caused.
The company will not be held responsible for any accidents generated from such activities.
Electric shocks can be caused if the product is dropped into water by mistake.
The following measures need to be taken.
Remove the electric plug from the wall socket.
Recover the product from the water.
Contact the sales shop or the main office for advice.
WEEE Directive
8
Installation Precautions
Do not install the product in a place where the
sunlight comes in directly or the temperature
goes below zero.
If not followed, the case can be
transformed or broken due to freezing.
Precautions for connecting the acidic water
hose.
Install the acidic water hose lower than the main case.
If the hose is longer than necessary or higher
than the main case, the ion generation can
be affected, possibly leading to a change in
the taste of water.
Should connect the product to the cool water
pipe (If connected to the warm water pipe,
the purification filter and the electrolytic bath
can be damaged)
If not followed, the life span of the filter will
be shortened.
Avoid any place where heat of fire can be directly
contacted
If not followed, the case can be transformed,
possibly leading to water leakage
Do not modify the product arbitrarily.
Do not use the product in a place full of moisture
or dusts
If not followed, damage to the product or risk to
your safety can be caused.
If not followed, damage to the product or risk to
your safety can be caused.
Should hold the bottom plate of the main case.
It will be safe to move the product by holding the
product at the bottom plate.
Do not place any other objects on the product.
Do not install the product in the areas described as the following.
Caution
If the product is dropped, electric shocks can be caused due to the internal malfunction following the
impact from the dropping. The product needs to be taken to the sales shop or the main office in
order for you to request an inspection.
The purification filter can be broken due to freezing if the product is used in a place where it is
freezing cold, requiring the product, if not used, to be stored in a place where the breaking due to
freezing can be prevented, but after the purification filter is removed first.
Caution - Malfunction or accidents can be occured.
No warm water
Requiring you to check the rated voltage before
connecting the electric cord.
9
How to install
1. Wall mounted water tap
Caution
Check whether the components to be installed at the water tap are appropriate.
Should use the standard hose (1/4"), supplied by the company for the connection.
Use the one- touch adapter to fasten the hose before fixing the safety pin as illustrated in Page 3.
- If the standard hose is not used, damage due to water pressure can be caused, possibly leading
to water leakage
Do not connect the product to a warm water pipe.
- Degradation of purification capacity and malfunctioning can be caused.
1. Disconnect the water tap from the water pipe.
2. Rotating the adapter into the water pipe. (Single-water tap)
3. Assemble the water tap back into the adapter. (Single-water tap)
4. Install the standard compliant adapter Included (Select between large and medium, small, 3/8” )
between the water pipe and the water branch pipe. Then install the adapter which needs to be
connected to the water ionizer to the cold water pipe, while connecting the balancing adapter to the
warm water pipe. (Water taps for cold and warm water)
5. Place the rubber gaskets between the water pipes, water tap, and adapter, and should apply the
Teflon tape to the connection parts to assemble them.
6. Insert the inlet hose into the one-touch fitting installed to the adapter and then fasten the safety pin.
7. Adjust the water pressure control screw to a appropriate level.
(Alkaline water flow standard: 1.5 0.5 /min)
Should use the standard inlet hose (1/4") and fix the valve cover in the direction of the hose to prevent
the hose from being bent or the fastening nut from being loosened.
10
2. Deck type sink mounted water tap
The following fools ate necessary for installation work
[Drawing 1]
Electric drill Hole cutter
Size:
Diameter1/4”
Pipe wrench
or spanner
General
screwdriver
1. Prepare the tools for installation as drawing : Electric drill,
Hole cutter, Pipe wrench or spanner, General screwdriver,
Teflon tape 1pc (Drawing 1.)
2. Turn off the water valves before installation under the
sinkdeck.
3. Disconnet the water tap from the cold water pipe.
4. Drill a hole for the 1/4" hose appropriate place
somewhere in sinkdeck and make the connection to the inlet
of the product
5. Find the cold water pipe inside the sink deck and connect
the adapter to the cold water pipe (Drawing 2.)
[Drawing 2]
[Drawing 3]
[Drawing 4]
6. Connect the standard connection hose (1/4") to the adapter
installed with one touch fitting of union. (Drawing 3~4)
Insert the inlet hose deepest into the one touch fitting and insert
the safety pin as in drawing.
( Pls check if the hose has been securely fitted to the end of one
thouch fitting. if not, it causes water leakage for water pressure )
7. After the connection, adjust the water pressure control screw
to an appropriate level
(Alkaline water flow standard 1.5 0.5 /min )
8. Check any possible water leakage at the connection parts
after the installation
Should use the standard inlet hose (1/4") and fix
the valve cover in the direction of the hose to
prevent the hose from being bent or fastening
nut from being loosened.
Water valve of Cold water
Water pipe
Steel Hose
Ring nut Groove
Cold water side Hot water side
Water pressure
adjustment screw (Spindle)
Running water line
connection
Adaptor(small)
Place of hole drilled
Teflon tape
Acidic Water Outlet
Indice
Altri manuali Biontech Sistema idrico
Manuali Sistema idrico popolari di altre marche
Spirotech
Spirotech SPIROVENT SUPERIOR S250 Manuale utente
Culligan
Culligan Aqua-Cleer Aqua-Cleer Advanced Drinking Water... Manuale utente
A.O. Smith
A.O. Smith Dura-Max AJH - 1000A - P Manuale utente
Microline
Microline T.F.C.-4 Manuale
Eureka Forbes
Eureka Forbes Aquaguard Select Manuale utente
Cetetherm
Cetetherm AquaEfficiency Manuale utente
