6
Using the Floor Scale & Remote Unit Together
The oor unit is tted with sensors that can measure body
fat %, body water %, body muscle % and the number of calories
you should consume each day to maintain current weight. When
the oor scale and remote unit are used together, you do not
need to enter your weight when entering your other coordinates
into the remote.
1. Press the ON/OFF button once on the remote unit.
2. Press the SET button to enter the setting mode. The user
number will start to ash. Press the UP or DOWN button to
select your user number.
3. Press the SET button to conrm.
4. The unit of weight will begin ashing. Press the UP or
DOWN button to change to st, Ibs or kg.
5. Press the SET button to conrm. The gender symbol will
begin to ash.
6. Press the UP or DOWN button to select your gender.
7. Press the SET button to conrm. The height value will begin to ash.
8. Press the UP or DOWN button to choose your height.
9. Press the SET button to conrm. The age value will begin to ash.
10. Press the UP or DOWN button to choose your correct age.
11. Press the SET button to conrm. The weight value will
begin to ash.
12. Once the weight value starts to ash on the remote
unit, make sure your ngers are pressed securely on the
electrodes on the remote, tap the oor scale and stand on
with bare feet.
13. Both displays will show ‘0.0’ rst and then ‘----‘. Several
seconds later your weight will be shown on the oor scale
and then on the remote unit, after a few seconds.
14. Keep standing on the oor scale with your hand extended in front of you
holding the sides of the remote. Your body fat %, body water %, body muscle
% and the number of calories you should consume each day to maintain
current weight, will be measured and then displayed on the remote.
kg
kg
cm
kg
Age
cm
kg
Age
cm
M
Kcal
kg
F
W
kg
kg
